knoir: Generate blobs tree:

Signed-off-by: HeroBuxx <me@herobuxx.me>

proprietary/vendor/bin/init.kernel.post_boot.sh

@@ -0,0 +1,49 @@
+#=============================================================================
+# Copyright (c) 2020-2021 Qualcomm Technologies, Inc.
+# All Rights Reserved.
+# Confidential and Proprietary - Qualcomm Technologies, Inc.
+#
+# Copyright (c) 2012-2013, 2016-2020, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above
+#       copyright notice, this list of conditions and the following
+#       disclaimer in the documentation and/or other materials provided
+#       with the distribution.
+#     * Neither the name of The Linux Foundation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#=============================================================================
+
+if [ -f /sys/devices/soc0/chip_family ]; then
+	chipfamily=`cat /sys/devices/soc0/chip_family`
+fi
+
+case "$chipfamily" in
+    "0x73")
+	/vendor/bin/sh /vendor/bin/init.kernel.post_boot-holi.sh
+	;;
+
+    "0x7c")
+	/vendor/bin/sh /vendor/bin/init.kernel.post_boot-blair.sh
+	;;
+     *)
+	echo "***WARNING***: Invalid chip family\n\t No postboot settings applied!!\n"
+	;;
+esac

proprietary/vendor/bin/init.qcom.sensors.sh

@@ -0,0 +1,33 @@
+#!/vendor/bin/sh
+# Copyright (c) 2020 The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of The Linux Foundation nor
+#       the names of its contributors may be used to endorse or promote
+#       products derived from this software without specific prior written
+#       permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# Function to start sensors for SSC enabled platforms
+#
+cp /vendor/etc/sensors/scripts/* /data/vendor/sensors/scripts/
+chmod a+rw /data/vendor/sensors/scripts/*

proprietary/vendor/bin/init.qti.chg_policy.sh

@@ -0,0 +1,48 @@
+#! /vendor/bin/sh
+
+#
+# Copyright (c) 2019-2021 Qualcomm Technologies, Inc.
+# All Rights Reserved.
+# Confidential and Proprietary - Qualcomm Technologies, Inc.
+#
+# Copyright (c) 2019 The Linux Foundation. All rights reserved.
+#
+
+export PATH=/vendor/bin
+
+soc_id=`getprop ro.vendor.qti.soc_id`
+if [ "$soc_id" -eq 415 ] || [ "$soc_id" -eq 439 ] || [ "$soc_id" -eq 450 ] || [ "$soc_id" -eq 475 ] || [ "$soc_id" -eq 497 ] || [ "$soc_id" -eq 498 ] || [ "$soc_id" -eq 499 ] || [ "$soc_id" -eq 515 ]; then
+    setprop persist.vendor.hvdcp_opti.start 2
+    exit 0
+fi
+
+if [ "$soc_id" -eq 441 ] || [ "$soc_id" -eq 471 ]; then
+	#Scuba does not support usb-pd or charge pumps
+	find /sys/class/power_supply/battery/ -type f  -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/bms/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/main/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/usb/ -type f -maxdepth 1 | xargs chown system.system
+else
+	find /sys/class/power_supply/battery/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/bms/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/main/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/usb/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/charge_pump_master/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/pc_port/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/dc/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/parallel/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/usbpd/usbpd0/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/qc-vdm/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/charge_pump/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/qcom-battery/ -type f -maxdepth 1 | xargs chown system.system
+
+	for i in 0 1 2 3 4 5 6 7 8 9
+	do
+		devname=`cat /sys/bus/iio/devices/iio:device$i/name`
+		if [[ "$devname" == *smb* ]] || [[ "$devname" == *qg* ]] || [[ "$devname" == *div2_cp* ]] || [[ "$devname" == *div2-cp* ]]; then
+			find /sys/bus/iio/devices/iio:device$i/ -type f -maxdepth 1 | xargs chown system.system
+		fi
+	done
+fi
+
+setprop persist.vendor.hvdcp_opti.start 1

proprietary/vendor/bin/init.qti.kernel.sh

@@ -0,0 +1,56 @@
+#! /vendor/bin/sh
+#=============================================================================
+# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
+# All Rights Reserved.
+# Confidential and Proprietary - Qualcomm Technologies, Inc.
+#
+# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of The Linux Foundation nor
+#       the names of its contributors may be used to endorse or promote
+#       products derived from this software without specific prior written
+#       permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#=============================================================================
+
+verify_pasr_support()
+{
+	ddr_type=`od -An -tx /proc/device-tree/memory/ddr_device_type`
+	ddr_type5="08"
+
+         if [ -d /sys/kernel/mem-offline ]; then
+		#only LPDDR5 supports PAAR
+		if [ ${ddr_type:4:2} != $ddr_type5 ]; then
+			setprop vendor.pasr.activemode.enabled false
+		fi
+
+                setprop vendor.pasr.enabled true
+         fi
+}
+
+start_msm_irqbalance()
+{
+         if [ -f /vendor/bin/msm_irqbalance ]; then
+                start vendor.msm_irqbalance
+         fi
+}
+start_msm_irqbalance
+verify_pasr_support

proprietary/vendor/bin/init.qti.media.sh

@@ -0,0 +1,126 @@
+#! /vendor/bin/sh
+#==============================================================================
+#       init.qti.media.sh
+#
+# Copyright (c) 2020-2023, Qualcomm Technologies, Inc.
+# All Rights Reserved.
+# Confidential and Proprietary - Qualcomm Technologies, Inc.
+#
+# Copyright (c) 2020, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above
+#       copyright notice, this list of conditions and the following
+#       disclaimer in the documentation and/or other materials provided
+#       with the distribution.
+#     * Neither the name of The Linux Foundation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#===============================================================================
+
+if [ -f /sys/devices/soc0/soc_id ]; then
+    soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null
+else
+    soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null
+fi
+
+target_qssi=`getprop vendor.media.target.qssi`
+target=`getprop ro.board.platform`
+build_codename=`getprop vendor.media.system.build_codename`
+product=`getprop ro.build.product`
+
+case "$target" in
+    "lahaina")
+        case "$soc_hwid" in
+            475|515)
+                setprop vendor.media.target_variant "_yupik_v0"
+                if [ $build_codename -le "13" ]; then
+                    setprop vendor.netflix.bsp_rev "Q7325-SPY-33758-1"
+                fi
+                sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc/sku_version` 2> /dev/null
+                if [ $sku_ver -eq 1 ]; then
+                    setprop vendor.media.target_variant "_yupik_v1"
+                fi
+                ;;
+            450)
+                setprop vendor.media.target_variant "_shima_v3"
+                if [ $build_codename -le "13" ]; then
+                    setprop vendor.netflix.bsp_rev "Q875-32774-1"
+                fi
+                sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc/sku_version` 2> /dev/null
+                if [ $sku_ver -eq 1 ]; then
+                    setprop vendor.media.target_variant "_shima_v1"
+                elif [ $sku_ver -eq 2 ]; then
+                    setprop vendor.media.target_variant "_shima_v2"
+                fi
+                ;;
+            497|498|575|576)
+                    setprop vendor.media.target_variant "_yupik_iot"
+                ;;
+            *)
+                if [ $target_qssi == "true" ]; then
+                    setprop vendor.media.target_variant "_lahaina_vendor"
+                else
+                    setprop vendor.media.target_variant "_lahaina"
+                fi
+                if [ $build_codename -le "13" ]; then
+                    setprop vendor.netflix.bsp_rev "Q875-32408-1"
+                fi
+                ;;
+        esac
+        ;;
+    "holi")
+        case "$soc_hwid" in
+            507|565|628)
+                setprop vendor.media.target_variant "_blair"
+                setprop vendor.netflix.bsp_rev "Q4350-32962-1"
+                ;;
+            578)
+                setprop vendor.media.target_variant "_blair_lite"
+                setprop vendor.netflix.bsp_rev "Q4350-32962-1"
+                ;;
+            454|472)
+                setprop vendor.media.target_variant "_holi"
+                setprop vendor.netflix.bsp_rev "Q4350-32962-1"
+                ;;
+        esac
+        ;;
+    "msmnile")
+        setprop vendor.media.target_variant "_msmnile"
+        if [ $product == "msmnile_gvmq" ] || [ $product == "msmnile_gvmgh" ]; then
+            case "$soc_hwid" in
+                460)
+                    setprop vendor.media.target_variant "_direwolf"
+                    ;;
+                377)
+                    setprop vendor.media.target_variant "_sm6150"
+                    ;;
+                362|405)
+                    setprop vendor.media.target_variant "_msmnile"
+                    ;;
+            esac
+        fi
+        ;;
+    "sm6150")
+        setprop vendor.media.target_variant "_sm6150"
+        ;;
+    "direwolf")
+        setprop vendor.media.target_variant "_direwolf"
+        ;;
+esac

proprietary/vendor/bin/init.qti.qcv.sh

@@ -0,0 +1,33 @@
+#! /vendor/bin/sh
+#=============================================================================
+# Copyright (c) 2020-21 Qualcomm Technologies, Inc.
+# All Rights Reserved.
+# Confidential and Proprietary - Qualcomm Technologies, Inc.
+#=============================================================================
+
+soc_id=`cat /sys/devices/soc0/soc_id` 2> /dev/null
+
+# Store soc_id in ro.vendor.qti.soc_id
+setprop ro.vendor.qti.soc_id $soc_id
+
+# For chipsets in QCV family, convert soc_id to soc_name
+# and store it in ro.vendor.qti.soc_name.
+if [ "$soc_id" -eq 415 ] || [ "$soc_id" -eq 439 ] || [ "$soc_id" -eq 456 ] ||
+   [ "$soc_id" -eq 501 ] || [ "$soc_id" -eq 502 ]; then
+    setprop ro.vendor.qti.soc_name lahaina
+    setprop ro.vendor.qti.soc_model SM8350
+elif [ "$soc_id" -eq 450 ]; then
+    setprop ro.vendor.qti.soc_name shima
+    setprop ro.vendor.qti.soc_model SM7350
+elif [ "$soc_id" -eq 475 ] || [ "$soc_id" -eq 499 ] ||
+     [ "$soc_id" -eq 497 ] || [ "$soc_id" -eq 498 ] ||
+     [ "$soc_id" -eq 515 ]; then
+    setprop ro.vendor.qti.soc_name yupik
+    setprop ro.vendor.qti.soc_model SM7325
+elif [ "$soc_id" -eq 575 ]; then
+    setprop ro.vendor.qti.soc_name yupik
+    setprop ro.vendor.qti.soc_model QCS5430
+elif [ "$soc_id" -eq 576 ]; then
+    setprop ro.vendor.qti.soc_name yupik
+    setprop ro.vendor.qti.soc_model QCM5430
+fi

proprietary/vendor/bin/vendor_modprobe.sh

@@ -0,0 +1,38 @@
+#! /vendor/bin/sh
+#=============================================================================
+# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
+# All Rights Reserved.
+# Confidential and Proprietary - Qualcomm Technologies, Inc.
+#=============================================================================
+
+#default to /vendor/lib/modules
+MODULES_PATH="/vendor/lib/modules/"
+GKI_MOD_PATH="/vendor/lib/modules/5.4-gki"
+
+MODPROBE="/vendor/bin/modprobe"
+MODULES=`${MODPROBE} -d ${MODULES_PATH} -l`
+
+# Find the first non-blacklisted module and try
+# inserting it. If insertion fails the module is not
+# compatible with the current kernel. Change the modules
+# directory to gki.
+for MODULE in ${MODULES}; do
+	cat ${MODULES_PATH}/modules.blocklist | grep $MODULE
+	if [ $? -ne 0 ]; then
+		break
+	fi
+done
+
+${MODPROBE} -a -b -d ${MODULES_PATH} ${MODULE}
+if [ $? -ne 0 ];then
+	MODULES_PATH=$GKI_MOD_PATH
+	MODULES=`${MODPROBE} -d ${MODULES_PATH} -l`
+fi
+
+# Iterate over module list and modprobe them in background.
+for MODULE in ${MODULES}; do
+	${MODPROBE} -a -b -d ${MODULES_PATH} ${MODULE} &
+done
+
+# Wait until all the modprobes are finished
+wait

proprietary/vendor/etc/charger_fstab.qti

@@ -0,0 +1,33 @@
+# Copyright (c) 2019 - 2020, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#    * Redistributions of source code must retain the above copyright
+#      notice, this list of conditions and the following disclaimer.
+#    * Redistributions in binary form must reproduce the above
+#      copyright notice, this list of conditions and the following
+#      disclaimer in the documentation and/or other materials provided
+#      with the distribution.
+#    * Neither the name of The Linux Foundation nor the names of its
+#      contributors may be used to endorse or promote products derived
+#      from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Android fstab file.
+# The filesystem that contains the filesystem checker binary (typically /system) cannot
+# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
+
+#<src>                                                 <mnt_point>            <type>  <mnt_flags and options>                            <fs_mgr_flags>
+/dev/block/bootdevice/by-name/modem                     /vendor/firmware_mnt   vfat    ro,shortname=lower,uid=1000,gid=1000,dmask=227,fmask=337,context=u:object_r:firmware_file:s0 wait,slotselect

proprietary/vendor/etc/cne/mwqem.conf

@@ -0,0 +1,17 @@
+#configuration parameters for Multi-network Wireless Quality Estimation and Management.
+
+#Number of previous latency iterations to track to decide the better LQS interface
+latency_count:3
+#Threshold in ms to decide the better interface for LQS.
+latency_threshold:10
+#Number of tcp connections to be established in each latency session
+max_tcp_connects:3
+#Max waiting time for a dns query to be resolved
+dns_timeout:9
+#Minimum change in mwqem ratio to update the new LQA ratio
+lqa_update_threshold:0.25
+#Timer in msec to track the lqs updates. Only one update will be allowed
+#in this duration
+lqa_update_count_timer:10000
+#default URL for establishing a tcp sessions
+mwqem_http_url:www.qualcomm.com

proprietary/vendor/etc/cne/profileMwqem.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2020 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile1.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1.0</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1.0</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1.0</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1.0</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1.0</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1.0</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1.0</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1.0</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                                        <MACMibThreshold2a>1.0</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1.0</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile2.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1.0</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1.0</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1.0</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1.0</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1.0</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1.0</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1.0</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1.0</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                                        <MACMibThreshold2a>1.0</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1.0</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile3.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile4.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1.0</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1.0</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1.0</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1.0</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1.0</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1.0</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1.0</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1.0</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                                        <MACMibThreshold2a>1.0</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1.0</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile5.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>12</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>3</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>60</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile6.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>12</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>3</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>60</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile1.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.09</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.55</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.15</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.12</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.64</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.22</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>0.42</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>0.21</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile15.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile16.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile17.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile18.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile19.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-72</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile2.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.09</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.55</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.15</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.12</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.64</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.22</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>0.42</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>0.21</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile20.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>12</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>3</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>60</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile21.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>12</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>3</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>60</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile3.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.09</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.55</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.15</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.12</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.64</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.22</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>0.42</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>0.21</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile32.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.09</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.55</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.15</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.12</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.64</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.22</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>0.42</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>0.21</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile4.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile5.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2016-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-72</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile6.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>12</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>3</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>60</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile7.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>12</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>3</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>60</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile1.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.09</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.55</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.15</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.12</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.64</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.22</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>0.42</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>0.21</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile2.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.09</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.55</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.15</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.12</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.64</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.22</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>0.42</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>0.21</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile3.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.09</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.55</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.15</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.12</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.64</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.22</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>0.42</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>0.21</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile4.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.09</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.55</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.15</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.12</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.64</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.22</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>0.42</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>0.21</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile5.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>12</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>3</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>60</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile6.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.09</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.55</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.15</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.12</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.64</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.22</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-78,-78</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-78,-78</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>0.42</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>0.21</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/default-permissions/com.qualcomm.qti.cne.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+  ~ Copyright (c) 2020 Qualcomm Technologies, Inc.
+  ~ All Rights Reserved.
+  ~ Confidential and Proprietary - Qualcomm Technologies, Inc.
+-->
+
+<!--
+This XML file declares which signature|privileged permissions should be
+granted to privileged applications on QTI devices.
+It allows additional grants on top of privapp-permissions-platform.xml
+-->
+
+<exceptions>
+    <exception package="com.qualcomm.qti.cne">
+        <permission name="android.permission.READ_PHONE_STATE" fixed="false"/>
+    </exception>
+</exceptions>

proprietary/vendor/etc/display/DPU660.xml

@@ -0,0 +1,75 @@
+<XML>
+<!--
+ Copyright (c) 2020 Qualcomm Technologies, Inc.
+ All Rights Reserved.
+ Confidential and Proprietary - Qualcomm Technologies, Inc.
+-->
+<SDE660>
+  <Param0>6</Param0>
+  <Param1>8</Param1>
+  <Param2>4</Param2>
+  <Param3>1</Param3>
+  <Param4>1</Param4>
+  <Param5>2</Param5>
+  <Param6>0</Param6> <!-- TODO: recheck (as per kernel code it is 2) -->
+  <Param7>3</Param7>
+  <Param8>25</Param8>
+  <Param9>1.05</Param9>
+  <Param10>24</Param10>
+  <Param11>4100.0</Param11>
+  <Param12>4800.0</Param12>
+  <Param13>1</Param13>
+  <Param14>32</Param14>
+  <Param15>1.5</Param15>
+  <Param16>1.5</Param16>
+  <Param17>4.0</Param17>
+  <Param18>3</Param18>
+  <Param19>2</Param19>
+  <Param20>48</Param20>
+  <Param21>32</Param21>
+  <Param22>3</Param22>
+  <Param23>1600.0</Param23>
+  <Param24>261.0</Param24>
+  <Param25>4800.0</Param25>
+  <Param26>9600.0</Param26>
+  <Param27>4.0</Param27>
+  <Param28>1.1</Param28>
+  <Param29>61440</Param29> <!-- TODO: recheck lut Param29-31 (currently, as per lahaina) -->
+  <Param30>4608</Param30>
+  <Param31>8</Param31>
+  <Param32>2</Param32>
+  <Param33>75</Param33>
+  <Param34>256</Param34>
+  <Param35>100</Param35>
+  <Param36>1</Param36>
+  <Param37>4</Param37>
+  <Param38>800</Param38>
+  <Param39>1600</Param39>
+  <Param40>2</Param40>
+  <Param41>4</Param41>
+  <Param42>3</Param42>
+  <Param43>1.45</Param43>
+  <Param44>1.0</Param44>
+  <Param45>1.0</Param45>
+  <Param46>4100</Param46>
+  <Param47>0.25</Param47>
+  <Param48>3.0</Param48>
+  <Param49>5.33</Param49>
+  <Param50>16</Param50> <!-- TODO: recheck Param50-52 (currently, as per lahaina) -->
+  <Param51>1.7</Param51>
+  <Param52>1.4</Param52>
+  <Param53>32</Param53>
+  <Param54>16</Param54>
+  <Param55>8.33</Param55>
+  <Param56>8.0</Param56>
+  <Param57>75</Param57>
+
+<!-- Example
+  <Overrides>
+    <Override0>
+      <Param11>4400</Param11>
+    </Override0>
+  </Overrides>
+-->
+</SDE660>
+</XML>

proprietary/vendor/etc/display/DPU670.xml

@@ -0,0 +1,75 @@
+<XML>
+<!--
+ Copyright (c) 2020 Qualcomm Technologies, Inc.
+ All Rights Reserved.
+ Confidential and Proprietary - Qualcomm Technologies, Inc.
+-->
+<SDE670>
+  <Param0>6</Param0>
+  <Param1>8</Param1>
+  <Param2>4</Param2>
+  <Param3>1</Param3>
+  <Param4>1</Param4>
+  <Param5>2</Param5>
+  <Param6>0</Param6> <!-- TODO: recheck (as per kernel code it is 2) -->
+  <Param7>3</Param7>
+  <Param8>25</Param8>
+  <Param9>1.05</Param9>
+  <Param10>40</Param10>
+  <Param11>4300.0</Param11>
+  <Param12>4800.0</Param12>
+  <Param13>2</Param13>
+  <Param14>32</Param14>
+  <Param15>2.0</Param15>
+  <Param16>1.5</Param16>
+  <Param17>4.0</Param17>
+  <Param18>3</Param18>
+  <Param19>2</Param19>
+  <Param20>48</Param20>
+  <Param21>32</Param21>
+  <Param22>3</Param22>
+  <Param23>1600.0</Param23>
+  <Param24>261.0</Param24>
+  <Param25>4800.0</Param25>
+  <Param26>9600.0</Param26>
+  <Param27>4.0</Param27>
+  <Param28>1.1</Param28>
+  <Param29>61440</Param29> <!-- TODO: recheck lut Param29-31 (currently, as per lahaina) -->
+  <Param30>4608</Param30>
+  <Param31>8</Param31>
+  <Param32>2</Param32>
+  <Param33>75</Param33>
+  <Param34>256</Param34>
+  <Param35>100</Param35>
+  <Param36>2</Param36>
+  <Param37>4</Param37>
+  <Param38>800</Param38>
+  <Param39>1600</Param39>
+  <Param40>2</Param40>
+  <Param41>4</Param41>
+  <Param42>3</Param42>
+  <Param43>1.45</Param43>
+  <Param44>1.0</Param44>
+  <Param45>1.0</Param45>
+  <Param46>4300</Param46>
+  <Param47>0.25</Param47>
+  <Param48>3.0</Param48>
+  <Param49>5.33</Param49>
+  <Param50>16</Param50>
+  <Param51>1.7</Param51>
+  <Param52>1.4</Param52>
+  <Param53>32</Param53>
+  <Param54>16</Param54>
+  <Param55>8.33</Param55>
+  <Param56>8.0</Param56>
+  <Param57>75</Param57>
+
+<!-- Example
+  <Overrides>
+    <Override0>
+      <Param11>4400</Param11>
+    </Override0>
+  </Overrides>
+-->
+</SDE670>
+</XML>

proprietary/vendor/etc/display/DPU720.xml

@@ -0,0 +1,76 @@
+<XML>
+<!--
+Copyright (c) 2021 Qualcomm Technologies, Inc.
+ All Rights Reserved.
+ Confidential and Proprietary - Qualcomm Technologies, Inc.
+-->
+<SDE720>
+  <Param0>6</Param0>
+  <Param1>8</Param1>
+  <Param2>4</Param2>
+  <Param3>1</Param3>
+  <Param4>1</Param4>
+  <Param5>2</Param5>
+  <Param6>0</Param6>
+  <Param7>3</Param7>
+  <Param8>25</Param8>
+  <Param9>1.05</Param9>
+  <Param10>40</Param10>
+  <Param11>4300</Param11>
+  <Param12>4800</Param12>
+  <Param13>1</Param13>
+  <Param14>32</Param14>
+  <Param15>1.5</Param15>
+  <Param16>1.5</Param16>
+  <Param17>4.0</Param17>
+  <Param18>3</Param18>
+  <Param19>2</Param19>
+  <Param20>48</Param20>
+  <Param21>32</Param21>
+  <Param22>3</Param22>
+  <Param23>800.0</Param23>
+  <Param24>261.0</Param24>
+  <Param25>4800.0</Param25>
+  <Param26>9600.0</Param26>
+  <Param27>4.0</Param27>
+  <Param28>1.1</Param28>
+  <Param29>61440</Param29>
+  <Param30>4608</Param30>
+  <Param31>8</Param31>
+  <Param32>2</Param32>
+  <Param33>75</Param33>
+  <Param34>256</Param34>
+  <Param35>100</Param35>
+  <Param36>2</Param36>
+  <Param37>4</Param37>
+  <Param38>800</Param38>
+  <Param39>1600</Param39>
+  <Param40>2</Param40>
+  <Param41>4</Param41>
+  <Param42>3</Param42>
+  <Param43>1.45</Param43>
+  <Param44>1.0</Param44>
+  <Param45>1.0</Param45>
+  <Param46>4300</Param46>
+  <Param47>0.25</Param47>
+  <Param48>3.0</Param48>
+  <Param49>5.33</Param49>
+  <Param50>16</Param50>
+  <Param51>1.7</Param51>
+  <Param52>1.4</Param52>
+  <Param53>32</Param53>
+  <Param54>16</Param54>
+  <Param55>8.33</Param55>
+  <Param56>8.0</Param56>
+  <Param57>75</Param57>
+
+<!-- Example
+  <Overrides>
+    <Override0>
+      <Param11>4400</Param11>
+    </Override0>
+  </Overrides>
+-->
+</SDE720>
+</XML>
+

proprietary/vendor/etc/display/DPU7__.xml

@@ -0,0 +1,75 @@
+<XML>
+<!--
+ Copyright (c) 2020 Qualcomm Technologies, Inc.
+ All Rights Reserved.
+ Confidential and Proprietary - Qualcomm Technologies, Inc.
+-->
+<SDE7__>
+  <Param0>6</Param0>
+  <Param1>8</Param1>
+  <Param2>4</Param2>
+  <Param3>1</Param3>
+  <Param4>1</Param4>
+  <Param5>2</Param5>
+  <Param6>0</Param6>
+  <Param7>3</Param7>
+  <Param8>25</Param8>
+  <Param9>1.05</Param9>
+  <Param10>40</Param10>
+  <Param11>5200.0</Param11>
+  <Param12>4800.0</Param12>
+  <Param13>2</Param13>
+  <Param14>32</Param14>
+  <Param15>1.5</Param15>
+  <Param16>1.5</Param16>
+  <Param17>4.0</Param17>
+  <Param18>3</Param18>
+  <Param19>2</Param19>
+  <Param20>48</Param20>
+  <Param21>32</Param21>
+  <Param22>3</Param22>
+  <Param23>800.0</Param23>
+  <Param24>261.0</Param24>
+  <Param25>4800.0</Param25>
+  <Param26>9600.0</Param26>
+  <Param27>4.0</Param27>
+  <Param28>1.1</Param28>
+  <Param29>61440</Param29>
+  <Param30>4608</Param30>
+  <Param31>8</Param31>
+  <Param32>2</Param32>
+  <Param33>75</Param33>
+  <Param34>256</Param34>
+  <Param35>100</Param35>
+  <Param36>4</Param36>
+  <Param37>4</Param37>
+  <Param38>800</Param38>
+  <Param39>1600</Param39>
+  <Param40>2</Param40>
+  <Param41>4</Param41>
+  <Param42>3</Param42>
+  <Param43>1.45</Param43>
+  <Param44>1.0</Param44>
+  <Param45>1.0</Param45>
+  <Param46>3900</Param46>
+  <Param47>0.25</Param47>
+  <Param48>3.0</Param48>
+  <Param49>5.33</Param49>
+  <Param50>16</Param50>
+  <Param51>1.7</Param51>
+  <Param52>1.4</Param52>
+  <Param53>32</Param53>
+  <Param54>16</Param54>
+  <Param55>8.33</Param55>
+  <Param56>8.0</Param56>
+  <Param57>75</Param57>
+
+<!-- Example
+  <Overrides>
+    <Override0>
+      <Param11>4400</Param11>
+    </Override0>
+  </Overrides>
+-->
+</SDE7__>
+</XML>

proprietary/vendor/etc/gpfspath_oem_config.xml

@@ -0,0 +1,61 @@
+<!--
+Copyright (c) 2017 Qualcomm Technologies, Inc.
+All Rights Reserved.
+Confidential and Proprietary - Qualcomm Technologies, Inc.
+-->
+
+<!--
+
+This file is configured by OEM to customize the path used by GP FS listener
+service to save files, and will be located in /vendor/etc on device
+
+"gp_data_path" and "gp_persist_path" are the /data and /persist partition
+path to save files, respectively.
+By default, "gp_data_path" is "/data/vendor/tzstorage/", and
+"gp_persist_path" is "/mnt/vendor/persist/data/".
+
+To replace with different paths, please also create folder in init.qcom.rc
+file and update SEAndroid policy.
+
+Take "/data/vendor/tzstorage/" as an example below,
+
+A) rootdir/etc/init.qcom.rc:
+# Create /data/vendor/tzstorage directory for SFS listener
+mkdir /data/vendor/tzstorage 0770 system system
+
+B) common/file.te:
+# SFS listener data file
+type data_tzstorage_file, file_type, data_file_type;
+
+C) common/file_contexts:
+/data/vendor/tzstorage(/.*)?       u:object_r:data_tzstorage_file:s0
+
+D) common/qseecomd.te:
+# Allow SFS to write to data partition
+allow tee data_tzstorage_file:dir create_dir_perms;
+allow tee data_tzstorage_file:file create_file_perms;
+
+"gp_whitelist_count" and "gp_whitelist_path"
+
+Some paths needs "/data/vendor/tzstorage" appended to it at the beginning
+as they do not have access/permissions on their own.
+Use gp_whitelist_count and gp_whitelist_paths entries to add more such paths.
+By default, we add "/data/system/users" and "/data/misc/qsee" for current use
+cases.
+
+To add an extra path, increment the count in gp_whitelist_count and add a new
+gp_whitelist_path entry. It is very critical that the count matches with the
+number of path entries.
+
+-->
+
+
+<sfs_path>
+    <gp_data_path> /data/vendor/tzstorage/ </gp_data_path>
+    <gp_persist_path> /mnt/vendor/persist/data/ </gp_persist_path>
+    <gp_whitelist_count> 4 </gp_whitelist_count>
+    <gp_whitelist_path> /data/system/users/ </gp_whitelist_path>
+    <gp_whitelist_path> /data/misc/qsee/ </gp_whitelist_path>
+    <gp_whitelist_path> /qwes </gp_whitelist_path>
+    <gp_whitelist_path> /qwes/licenses </gp_whitelist_path>
+</sfs_path>