r8q: Initial vendor tree

Change-Id: I3b9527dbbd4761e11230b6bafe8881d968674e24

Android.bp

@@ -0,0 +1,80 @@
+// Automatically generated file. DO NOT MODIFY
+//
+// This file is generated by device/samsung/r8q/setup-makefiles.sh
+
+soong_namespace {
+	imports: [
+		"vendor/samsung/sm8250-common",
+	],
+}
+
+cc_prebuilt_library_shared {
+	name: "android.hardware.secure_element-impl-gto",
+	owner: "samsung",
+	strip: {
+		none: true,
+	},
+	target: {
+		android_arm64: {
+			srcs: ["proprietary/vendor/lib64/android.hardware.secure_element-impl-gto.so"],
+		},
+	},
+	compile_multilib: "64",
+	check_elf_files: false,
+	prefer: true,
+	soc_specific: true,
+}
+
+cc_prebuilt_library_shared {
+	name: "ese_spi_nxp",
+	owner: "samsung",
+	strip: {
+		none: true,
+	},
+	target: {
+		android_arm64: {
+			srcs: ["proprietary/vendor/lib64/ese_spi_nxp.so"],
+		},
+	},
+	compile_multilib: "64",
+	check_elf_files: false,
+	prefer: true,
+	soc_specific: true,
+}
+
+cc_prebuilt_binary {
+	name: "android.hardware.secure_element@1.0-service",
+	owner: "samsung",
+	target: {
+		android_arm64: {
+			srcs: ["proprietary/vendor/bin/hw/android.hardware.secure_element@1.0-service"],
+		},
+	},
+	compile_multilib: "64",
+	check_elf_files: false,
+	strip: {
+		none: true,
+	},
+	prefer: true,
+	relative_install_path: "hw",
+	soc_specific: true,
+}
+
+cc_prebuilt_binary {
+	name: "android.hardware.secure_element@1.0-service-gto",
+	owner: "samsung",
+	target: {
+		android_arm64: {
+			srcs: ["proprietary/vendor/bin/hw/android.hardware.secure_element@1.0-service-gto"],
+		},
+	},
+	compile_multilib: "64",
+	check_elf_files: false,
+	strip: {
+		none: true,
+	},
+	prefer: true,
+	relative_install_path: "hw",
+	soc_specific: true,
+}
+

Android.mk

@@ -0,0 +1,9 @@
+# Automatically generated file. DO NOT MODIFY
+#
+# This file is generated by device/samsung/r8q/setup-makefiles.sh
+
+LOCAL_PATH := $(call my-dir)
+
+ifeq ($(TARGET_DEVICE),r8q)
+
+endif

BoardConfigVendor.mk

@@ -0,0 +1,4 @@
+# Automatically generated file. DO NOT MODIFY
+#
+# This file is generated by device/samsung/r8q/setup-makefiles.sh
+

proprietary/vendor/etc/init/android.hardware.secure_element@1.0-service-gto-sku.rc

@@ -0,0 +1,8 @@
+service vendor.secure_element_hal_service-gto /vendor/bin/hw/android.hardware.secure_element@1.0-service-gto
+    class hal
+    disabled
+    user system
+    group system
+    
+on property:ro.boot.hardware.sku=s3fwrn5
+    start vendor.secure_element_hal_service-gto

proprietary/vendor/etc/init/android.hardware.secure_element@1.0-service-sku.rc

@@ -0,0 +1,8 @@
+service vendor.secure_element_hal_service /vendor/bin/hw/android.hardware.secure_element@1.0-service
+    class hal
+    disabled
+    user system
+    group system
+    
+on property:ro.boot.hardware.sku=sn110t
+    start vendor.secure_element_hal_service

proprietary/vendor/etc/init/nxp.android.hardware.nfc@1.2-service.rc

@@ -0,0 +1,10 @@
+service vendor.nfc_hal_service /vendor/bin/hw/nxp.android.hardware.nfc@1.2-service
+    interface android.hardware.nfc@1.0::INfc default
+    interface android.hardware.nfc@1.1::INfc default
+    interface android.hardware.nfc@1.2::INfc default
+    interface vendor.samsung.hardware.nfc@2.0::ISehNfc default
+    class hal
+    oneshot
+    disabled
+    user nfc
+    group nfc net_bt_admin

proprietary/vendor/etc/libese-nxp.conf

@@ -0,0 +1,88 @@
+##This file needs to be pushed into /vendor/etc/libese-nxp.conf
+
+###############################################################################
+# Application options
+SE_DEBUG_ENABLED=1
+
+
+#Timeout in secs
+NXP_SWP_RD_TAG_OP_TIMEOUT=0xFF
+
+#WTX Count in secs
+NXP_WTX_COUNT_VALUE=180
+
+#Max WTX Count in OSU mode in secs
+NXP_OSU_MAX_WTX_COUNT=60
+
+#Delay(us) to recover if invalid data received
+RNACK_RETRY_DELAY=7000
+
+# PN67T_PWR_SCHEME          0x01
+# PN80T_LEGACY_PWR_SCHEME   0x02
+# PN80T_EXT_PMU_SCHEME      0x03
+NXP_POWER_SCHEME=0x02
+
+# For SOF = 0x5A            0x01
+# For SOF = 0x00            0x02
+NXP_SOF_WRITE=0x01
+
+#SPI Thorughput measurement log enabled(1)/disabled(0) in kernel
+NXP_TP_MEASUREMENT=0x00
+
+#Enable/Disable interface reset as part of SPI open
+NXP_SPI_INTF_RST_ENABLE=0x01
+
+###############################################################################
+# SPI WRITE TIMEOUT for RF event synchronization
+NXP_SPI_WRITE_TIMEOUT=0x14
+
+###############################################################################
+# SPI Device Node name
+NXP_ESE_DEV_NODE="/dev/p61"
+
+#MAX NO OF R_NACK RETRY ALLOWED IN CASE OF CRC FAILURE
+NXP_MAX_RNACK_RETRY=0x03
+NXP_VISO_DPD_ENABLED=0x01
+#NXP_NAD_POLL_RETRY_TIME is in 100's of us
+# e.g. 0x05 --> 500 us dealy
+NXP_NAD_POLL_RETRY_TIME=0x05
+###############################################################################
+# P61 interface options for JCOP Download
+# NFC 0x01
+# SPI 0x02
+NXP_P61_JCOP_DEFAULT_INTERFACE=0x01
+
+###############################################################################
+# IFS adjustment configuration value of IFSD for eSE
+# Any value set which is greater than IFSC value will be R-NACKed from JCOP
+# Default IFSC: 0x00FE = (0x0102 - 0x4(header))(As agreed with JCOP)
+#
+NXP_ESE_IFSD_VALUE=0x0200
+
+###############################################################################
+# IFS adjustment configuration value of IFSD for eUICC
+# Any value set which is greater than IFSC value will be R-NACKed from JCOP
+# Default IFSC: 0x00FE = (0x0102 - 0x4(header))(As agreed with JCOP)
+#
+NXP_EUICC_IFSD_VALUE=0x0200
+
+###############################################################################
+# Interface to perform the eSE cold reset
+# Possible value can be 0x00 or 0x01
+# 0x00 = ESE_HAL
+# 0x01 = NFC_HAL
+NXP_P61_COLD_RESET_INTERFACE=0x00
+
+###############################################################################
+# Assign terminal number to each interface based on system config
+NXP_SPI_SE_TERMINAL_NUM="eSE1"
+
+###############################################################################
+# Identify the CHIP/OS version for which this config file is targeted
+# Possible value can be as below
+# 0x01 = JCOP_4_0
+# 0x02 = JCOP_5_1
+# 0x03 = JCOP_5_2
+NXP_OS_VERSION=0x03
+
+###############################################################################

proprietary/vendor/etc/libse-gto-hal.conf

@@ -0,0 +1,2 @@
+#Gemalto SPI devnode
+GTO_DEV=/dev/p3;

r8q-vendor.mk

@@ -0,0 +1,23 @@
+# Automatically generated file. DO NOT MODIFY
+#
+# This file is generated by device/samsung/r8q/setup-makefiles.sh
+
+PRODUCT_SOONG_NAMESPACES += \
+    vendor/samsung/r8q
+
+PRODUCT_COPY_FILES += \
+    vendor/samsung/r8q/proprietary/vendor/bin/hw/nxp.android.hardware.nfc@1.2-service:$(TARGET_COPY_OUT_VENDOR)/bin/hw/nxp.android.hardware.nfc@1.2-service \
+    vendor/samsung/r8q/proprietary/vendor/etc/init/android.hardware.secure_element@1.0-service-gto-sku.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/android.hardware.secure_element@1.0-service-gto-sku.rc \
+    vendor/samsung/r8q/proprietary/vendor/etc/init/android.hardware.secure_element@1.0-service-sku.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/android.hardware.secure_element@1.0-service-sku.rc \
+    vendor/samsung/r8q/proprietary/vendor/etc/init/nxp.android.hardware.nfc@1.2-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/nxp.android.hardware.nfc@1.2-service.rc \
+    vendor/samsung/r8q/proprietary/vendor/etc/libese-nxp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libese-nxp.conf \
+    vendor/samsung/r8q/proprietary/vendor/etc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf \
+    vendor/samsung/r8q/proprietary/vendor/firmware/nfc/libsn100u_fw.so:$(TARGET_COPY_OUT_VENDOR)/firmware/nfc/libsn100u_fw.so \
+    vendor/samsung/r8q/proprietary/vendor/lib64/nfc_nci_nxpsn.so:$(TARGET_COPY_OUT_VENDOR)/lib64/nfc_nci_nxpsn.so \
+    vendor/samsung/r8q/proprietary/vendor/lib64/vendor.samsung.hardware.nfc@2.0.so:$(TARGET_COPY_OUT_VENDOR)/lib64/vendor.samsung.hardware.nfc@2.0.so
+
+PRODUCT_PACKAGES += \
+    android.hardware.secure_element-impl-gto \
+    ese_spi_nxp \
+    android.hardware.secure_element@1.0-service \
+    android.hardware.secure_element@1.0-service-gto