HeroBuxx
BIN
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
Vendored
Executable
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
+33
@@ -0,0 +1,33 @@
|
||||
#!/vendor/bin/sh
|
||||
# Copyright (c) 2020 The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
#
|
||||
# Function to start sensors for SSC enabled platforms
|
||||
#
|
||||
cp /vendor/etc/sensors/scripts/* /data/vendor/sensors/scripts/
|
||||
chmod a+rw /data/vendor/sensors/scripts/*
|
||||
+48
@@ -0,0 +1,48 @@
|
||||
#! /vendor/bin/sh
|
||||
|
||||
#
|
||||
# Copyright (c) 2019-2021 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2019 The Linux Foundation. All rights reserved.
|
||||
#
|
||||
|
||||
export PATH=/vendor/bin
|
||||
|
||||
soc_id=`getprop ro.vendor.qti.soc_id`
|
||||
if [ "$soc_id" -eq 415 ] || [ "$soc_id" -eq 439 ] || [ "$soc_id" -eq 450 ] || [ "$soc_id" -eq 475 ] || [ "$soc_id" -eq 497 ] || [ "$soc_id" -eq 498 ] || [ "$soc_id" -eq 499 ] || [ "$soc_id" -eq 515 ]; then
|
||||
setprop persist.vendor.hvdcp_opti.start 2
|
||||
exit 0
|
||||
fi
|
||||
|
||||
if [ "$soc_id" -eq 441 ] || [ "$soc_id" -eq 471 ]; then
|
||||
#Scuba does not support usb-pd or charge pumps
|
||||
find /sys/class/power_supply/battery/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/power_supply/bms/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/power_supply/main/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/power_supply/usb/ -type f -maxdepth 1 | xargs chown system.system
|
||||
else
|
||||
find /sys/class/power_supply/battery/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/power_supply/bms/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/power_supply/main/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/power_supply/usb/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/power_supply/charge_pump_master/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/power_supply/pc_port/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/power_supply/dc/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/power_supply/parallel/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/usbpd/usbpd0/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/qc-vdm/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/charge_pump/ -type f -maxdepth 1 | xargs chown system.system
|
||||
find /sys/class/qcom-battery/ -type f -maxdepth 1 | xargs chown system.system
|
||||
|
||||
for i in 0 1 2 3 4 5 6 7 8 9
|
||||
do
|
||||
devname=`cat /sys/bus/iio/devices/iio:device$i/name`
|
||||
if [[ "$devname" == *smb* ]] || [[ "$devname" == *qg* ]] || [[ "$devname" == *div2_cp* ]] || [[ "$devname" == *div2-cp* ]]; then
|
||||
find /sys/bus/iio/devices/iio:device$i/ -type f -maxdepth 1 | xargs chown system.system
|
||||
fi
|
||||
done
|
||||
fi
|
||||
|
||||
setprop persist.vendor.hvdcp_opti.start 1
|
||||
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
BIN
Binary file not shown.
BIN
Binary file not shown.
Binary file not shown.
Vendored
+183
@@ -0,0 +1,183 @@
|
||||
# AP DR SENSOR Configuration file
|
||||
#
|
||||
# SENSOR_SERVICE options are one of below
|
||||
# accel,gyro,vehicle_accel,vehicle_gyro,pedometer,vehicle_odometry,accel_temp,
|
||||
# gyro_temp,baro,mag_calib,mag_uncalib,amd,rmd.
|
||||
#
|
||||
# SENSOR_PROVIDER options is one of -- default,native,ssc,samlite.
|
||||
#
|
||||
# SENSOR_RATE = 1~100 (Hz)
|
||||
#
|
||||
# SENSOR_SAMPLES = 1~N
|
||||
#
|
||||
# SENSOR_STATISTIC_ENABLED
|
||||
# bit 0: Diag Print Enabled
|
||||
# bit 1: Adb Print Enabled
|
||||
# SENSOR_STATISTIC_PRINT_COUNT
|
||||
# Skip Number of Print
|
||||
#
|
||||
# QDR_DYNAMIC_LOADING = 1~3
|
||||
# Configure QDR library to be loaded
|
||||
# 1: QDR3
|
||||
# 2: QDR2-GYRO
|
||||
# 3: QDR2-DWT
|
||||
#
|
||||
#
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR3 Configuration #
|
||||
# #
|
||||
# For QDR3, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
SENSOR_SERVICE = accel
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 10
|
||||
SENSOR_SAMPLES = 10
|
||||
#
|
||||
SENSOR_SERVICE = vehicle_speed
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 100
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
SENSOR_SERVICE = gyro
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 10
|
||||
SENSOR_SAMPLES = 10
|
||||
#
|
||||
SENSOR_SERVICE = vehicle_gear
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 100
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
SENSOR_SERVICE = accel_temp
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 1
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
QDR_DYNAMIC_LOADING = 1
|
||||
##Specify CAN sensor type: Valid Options: 14(ODO), 2(ODO_DWT), 3(ODO_DWS)
|
||||
QDR_CAN_TYPE = 14
|
||||
##Reporting offset before PPS boundary
|
||||
QDR_REPORTING_OFFSET = 20
|
||||
#
|
||||
|
||||
##Vehicle Sensor Configuration (CAN data availability)
|
||||
##QDR_VEH_SENSOR_CONFIG:
|
||||
## 0: VEHICLE_SENSOR_PRESENT - Vehicle Sensor is available (DEFAULT)
|
||||
## 1: VEHICLE_SENSOR_OPTIONAL - Vehicle Sensor may or may not be present.
|
||||
#QDR_VEH_SENSOR_CONFIG = 0
|
||||
|
||||
##Select Wheel set (E.g.: Front two wheels, Rear two wheels OR All four wheels)
|
||||
##To be used for differential wheel tick OR speed service.
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as
|
||||
##ODO_DWS(3) or ODO_DWT(2).
|
||||
##Value "0": Use Front two wheels
|
||||
##Value "1": Use Rear two wheels
|
||||
##Value "2": Use All four wheels
|
||||
#QG_DRIVE_WHEEL_FW_RW_AW = 2
|
||||
##Max Wheel tick value above which wheel tick rolls over
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
|
||||
#QG_DWT_MAX_WHEEL_TICK_COUNT = 255.0
|
||||
##Configure Wheel constant for DWT based below equation
|
||||
##(2 * pi * WHEEL_RADIUS / Pulses Per revolution)
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
|
||||
#QG_DWT_WHEEL_CONSTANT = 0.044
|
||||
#
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR2-DWT Configuration #
|
||||
# #
|
||||
# For QDR2-DWT, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_speed
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_dws
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gear
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#GNSS_POS_STATISTIC_ENABLED = 3
|
||||
#GNSS_POS_STATISTIC_PRNTCNT = 10
|
||||
#GNSS_MSR_STATISTIC_ENABLED = 3
|
||||
#GNSS_MSR_STATISTIC_PRNTCNT = 10
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
#QDR_DYNAMIC_LOADING = 3
|
||||
##Enable/disable sensor data flashback feature
|
||||
#QDR_FLASHBACK_ENABLED = 0
|
||||
##Enable/disable sensor data batching feature
|
||||
#QDR_BATCHING_ENABLED = 0
|
||||
##Reporting offset before PPS boundary
|
||||
#QDR_REPORTING_OFFSET = 20
|
||||
##Sensor dispatch threshold declaration
|
||||
#QDR_SENSDISPATCH_MS = 30
|
||||
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR2-GYRO Configuration #
|
||||
# #
|
||||
# For QDR2-GYRO, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_speed
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gyro
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gear
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
#QDR_DYNAMIC_LOADING = 2
|
||||
##Enable/disable sensor data flashback feature
|
||||
#QDR_FLASHBACK_ENABLED = 0
|
||||
##Enable/disable sensor data batching feature
|
||||
#QDR_BATCHING_ENABLED = 0
|
||||
##Reporting offset before PPS boundary
|
||||
#QDR_REPORTING_OFFSET = 20
|
||||
##Sensor dispatch threshold declaration
|
||||
#QDR_SENSDISPATCH_MS = 30
|
||||
#
|
||||
+14
@@ -0,0 +1,14 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
|
||||
#
|
||||
|
||||
# Android fstab file.
|
||||
# The filesystem that contains the filesystem checker binary (typically /system) cannot
|
||||
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
|
||||
|
||||
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
|
||||
/dev/block/bootdevice/by-name/persist /mnt/vendor/persist ext4 noatime,nosuid,nodev,barrier=1 wait
|
||||
+17
@@ -0,0 +1,17 @@
|
||||
#configuration parameters for Multi-network Wireless Quality Estimation and Management.
|
||||
|
||||
#Number of previous latency iterations to track to decide the better LQS interface
|
||||
latency_count:3
|
||||
#Threshold in ms to decide the better interface for LQS.
|
||||
latency_threshold:10
|
||||
#Number of tcp connections to be established in each latency session
|
||||
max_tcp_connects:3
|
||||
#Max waiting time for a dns query to be resolved
|
||||
dns_timeout:9
|
||||
#Minimum change in mwqem ratio to update the new LQA ratio
|
||||
lqa_update_threshold:0.25
|
||||
#Timer in msec to track the lqs updates. Only one update will be allowed
|
||||
#in this duration
|
||||
lqa_update_count_timer:10000
|
||||
#default URL for establishing a tcp sessions
|
||||
mwqem_http_url:www.qualcomm.com
|
||||
+239
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1.0</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1.0</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1.0</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1.0</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1.0</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1.0</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-72</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2016-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-72</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user