diff --git a/dipper-vendor.mk b/dipper-vendor.mk index 9fda93d..82d3e6f 100644 --- a/dipper-vendor.mk +++ b/dipper-vendor.mk @@ -6,7 +6,6 @@ PRODUCT_SOONG_NAMESPACES += \ vendor/xiaomi/dipper PRODUCT_COPY_FILES += \ - vendor/xiaomi/dipper/proprietary/vendor/etc/SensorHub.patch:$(TARGET_COPY_OUT_VENDOR)/etc/SensorHub.patch \ vendor/xiaomi/dipper/proprietary/vendor/etc/acdbdata/Forte/Forte_Bluetooth_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Forte/Forte_Bluetooth_cal.acdb \ vendor/xiaomi/dipper/proprietary/vendor/etc/acdbdata/Forte/Forte_Codec_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Forte/Forte_Codec_cal.acdb \ vendor/xiaomi/dipper/proprietary/vendor/etc/acdbdata/Forte/Forte_General_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Forte/Forte_General_cal.acdb \ @@ -39,12 +38,9 @@ PRODUCT_COPY_FILES += \ vendor/xiaomi/dipper/proprietary/vendor/etc/camera/score_icon.png:$(TARGET_COPY_OUT_VENDOR)/etc/camera/score_icon.png \ vendor/xiaomi/dipper/proprietary/vendor/etc/camera/sdm_ys_32p_120_21_5_perturb50.bin:$(TARGET_COPY_OUT_VENDOR)/etc/camera/sdm_ys_32p_120_21_5_perturb50.bin \ vendor/xiaomi/dipper/proprietary/vendor/etc/camera/watermark_font_2300_3199.dat:$(TARGET_COPY_OUT_VENDOR)/etc/camera/watermark_font_2300_3199.dat \ - vendor/xiaomi/dipper/proprietary/vendor/etc/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf \ - vendor/xiaomi/dipper/proprietary/vendor/etc/gpsconfig.xml:$(TARGET_COPY_OUT_VENDOR)/etc/gpsconfig.xml \ vendor/xiaomi/dipper/proprietary/vendor/etc/hdr_config.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/hdr_config.cfg \ vendor/xiaomi/dipper/proprietary/vendor/etc/init/android.hardware.keymaster@3.0-service-qti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/android.hardware.keymaster@3.0-service-qti.rc \ vendor/xiaomi/dipper/proprietary/vendor/etc/init/vendor.qti.secure_element@1.0-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.secure_element@1.0-service.rc \ - vendor/xiaomi/dipper/proprietary/vendor/etc/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/lhd.conf \ vendor/xiaomi/dipper/proprietary/vendor/etc/qdcm_calib_data_ss_notch_fhd_cmd_dsi_panel.xml:$(TARGET_COPY_OUT_VENDOR)/etc/qdcm_calib_data_ss_notch_fhd_cmd_dsi_panel.xml \ vendor/xiaomi/dipper/proprietary/vendor/etc/sdr_config.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/sdr_config.cfg \ vendor/xiaomi/dipper/proprietary/vendor/etc/sensors/config/adux1050_0.json:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/config/adux1050_0.json \ diff --git a/proprietary/vendor/etc/SensorHub.patch b/proprietary/vendor/etc/SensorHub.patch deleted file mode 100644 index 415bec6..0000000 --- a/proprietary/vendor/etc/SensorHub.patch +++ /dev/null @@ -1,9667 +0,0 @@ - - - - - - - - - - - - - - diff --git a/proprietary/vendor/etc/gps.conf b/proprietary/vendor/etc/gps.conf deleted file mode 100644 index 6795a2f..0000000 --- a/proprietary/vendor/etc/gps.conf +++ /dev/null @@ -1,302 +0,0 @@ -#Version check for XTRA -#DISABLE = 0 -#AUTO = 1 -#XTRA2 = 2 -#XTRA3 = 3 -XTRA_VERSION_CHECK=0 - -#unlimited XTRA download -XTRA_TEST_ENABLED = 1 -XTRA_THROTTLE_ENABLED = 0 -XTRA_SYSTEM_TIME_INJECT = 1 -# Error Estimate -# _SET = 1 -# _CLEAR = 0 -ERR_ESTIMATE=0 - -#NTP server -NTP_SERVER=time.izatcloud.net -NTP_SERVER_2=asia.pool.ntp.org -NTP_SERVER_3=0.cn.pool.ntp.org - -#XTRA CA path -XTRA_CA_PATH=/usr/lib/ssl/certs - -# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info -# 4 - Debug, 5 - Verbose -# If DEBUG_LEVEL is commented, Android's logging levels will be used -DEBUG_LEVEL = 3 - -# Intermediate position report, 1=enable, 0=disable -INTERMEDIATE_POS=0 - -# supl version 1.0 -SUPL_VER=0x20000 - -# Emergency SUPL, 1=enable, 0=disable -#SUPL_ES=1 - -#Choose PDN for Emergency SUPL -#1 - Use emergency PDN -#0 - Use regular SUPL PDN for Emergency SUPL -#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0 - -#SUPL_MODE is a bit mask set in config.xml per carrier by default. -#If it is uncommented here, this value will overwrite the value from -#config.xml. -#MSA=0X2 -#MSB=0X1 -SUPL_MODE=3 - -# GPS Capabilities bit mask -# SCHEDULING = 0x01 -# MSB = 0x02 -# MSA = 0x04 -# ON_DEMAND_TIME = 0x10 -# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING -CAPABILITIES=0x17 - -# Accuracy threshold for intermediate positions -# less accurate positions are ignored, 0 for passing all positions -ACCURACY_THRES=70 - -################################ -##### AGPS server settings ##### -################################ - -# FOR SUPL SUPPORT, set the following -# SUPL_HOST=supl.host.com or IP -# SUPL_PORT=1234 - -# FOR MO SUPL SUPPORT, set the following -# MO_SUPL_HOST=supl.host.com or IP -# MO_SUPL_PORT=1234 - -# FOR C2K PDE SUPPORT, set the following -# C2K_HOST=c2k.pde.com or IP -# C2K_PORT=1234 - -# Bitmask of slots that are available -# for write/install to, where 1s indicate writable, -# and the default value is 0 where no slots -# are writable. For example, AGPS_CERT_WRITABLE_MASK -# of b1000001010 makes 3 slots available -# and the remaining 7 slots unwritable. -#AGPS_CERT_WRITABLE_MASK=0 - -#################################### -# LTE Positioning Profile Settings -#################################### -# 0: Enable RRLP on LTE(Default) -# 1: Enable LPP_User_Plane on LTE -# 2: Enable LPP_Control_Plane -# 3: Enable both LPP_User_Plane and LPP_Control_Plane -LPP_PROFILE = 0 - -#################################### -#Datum Type -#################################### -# 0: WGS-84 -# 1: PZ-90 -DATUM_TYPE = 0 - -#################################### -#Datum Type -#################################### -# 0: WGS-84 -# 1: PZ-90 -DATUM_TYPE = 0 - -################################ -# EXTRA SETTINGS -################################ -# NMEA provider (1=Modem Processor, 0=Application Processor) -NMEA_PROVIDER=0 -# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) -SGLTE_TARGET=0 - -################################################## -# Select Positioning Protocol on A-GLONASS system -################################################## -# 0x1: RRC CPlane -# 0x2: RRLP UPlane -# 0x4: LLP Uplane -A_GLONASS_POS_PROTOCOL_SELECT = 0 - -################################################## -# Select technology for LPPe Control Plane -################################################## -# 0x1: DBH for LPPe CP -# 0x2: WLAN AP Measurements for LPPe CP -# 0x4: SRN AP measurement for CP -# 0x8: Sensor Barometer Measurement LPPe CP -#LPPE_CP_TECHNOLOGY = 0 - -################################################## -# Select technology for LPPe User Plane -################################################## -# 0x1: DBH for LPPe UP -# 0x2: WLAN AP Measurements for LPPe UP -# 0x4: SRN AP measurement for UP -# 0x8: Sensor Barometer Measurement LPPe UP -#LPPE_UP_TECHNOLOGY = 0 - -################################################## -# AGPS_CONFIG_INJECT -################################################## -# enable/disable injection of AGPS configurations: -# SUPL_VER -# SUPL_HOST -# SUPL_PORT -# MO_SUPL_HOST -# MO_SUPL_PORT -# C2K_HOST -# C2K_PORT -# LPP_PROFILE -# A_GLONASS_POS_PROTOCOL_SELECT -# 0: disable -# 1: enable -AGPS_CONFIG_INJECT = 1 - -################################################## -# GNSS settings for automotive use cases -# Configurations in following section are -# specific to automotive use cases, others -# please do not change, keep the default values -################################################## - -# AP Coarse Timestamp Uncertainty -################################################## -# default : 10 -# AP time stamp uncertainty, until GNSS receiver -# is able to acquire better timing information -AP_TIMESTAMP_UNCERTAINTY = 10 - -################################################## -# QDR engine availability status -################################################## -# 0 : NO QDR (default) -# 1 : QDR enabled -# This settings enables QDR Configuration for -# automotive use case, if enabled then -# DR_AP_Service needs to be enabled in izat.conf -#EXTERNAL_DR_ENABLED = 0 - -##################################### -# DR_SYNC Pulse Availability -##################################### -# 0 : DR_SYNC pulse not available (default) -# 1 : DR_SYNC pulse available -# This configuration enables the driver to make use -# of PPS events generated by DR_SYNC pulse -# Standard Linux PPS driver needs to be enabled -DR_SYNC_ENABLED = 0 - -##################################### -# PPS Device name -##################################### -PPS_DEVICENAME = /dev/pps0 - -##################################### -# Ignore PPS at Startup and after long outage -##################################### -IGNORE_PPS_PULSE_COUNT = 1 - -##################################### -# Long GNSS RF outage in seconds -##################################### -GNSS_OUTAGE_DURATION = 10 - -##################################### -# AP Clock Accuracy -##################################### -# Quality of APPS processor clock (in PPM). -# Value specified is used for calculation of -# APPS time stamp uncertainty -AP_CLOCK_PPM = 100 - -##################################### -# MAX ms difference to detect missing pulse -##################################### -# Specifies time threshold in ms to validate any missing PPS pulses -MISSING_PULSE_TIME_DELTA = 900 - -##################################### -# Propagation time uncertainty -##################################### -# This settings enables time uncertainty propagation -# logic incase of missing PPS pulse -PROPAGATION_TIME_UNCERTAINTY = 1 - -####################################### -# APN / IP Type Configuration -# APN and IP Type to use for setting -# up WWAN call. -# Use below values for IP Type: -# v4 = 4 -# v6 = 6 -# v4v6 = 10 -####################################### -# INTERNET_APN = abc.xyz -# INTERNET_IP_TYPE = 4 -# SUPL_APN = abc.xyz -# SUPL_IP_TYPE = 4 - -##################################### -# Modem type -##################################### -# This setting configures modem type -# (external=0 or internal=1) -# comment out the next line to vote -# for the first modem in the list -MODEM_TYPE = 1 - -################################################## -# CONSTRAINED TIME UNCERTAINTY MODE -################################################## -# 0 : disabled (default) -# 1 : enabled -# This setting enables GPS engine to keep its time -# uncertainty below the specified constraint -#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0 - -# If constrained time uncertainty mode is enabled, -# this setting specifies the time uncertainty -# threshold that gps engine need to maintain. -# In unit of milli-seconds. -# Default is 0.0 meaning that modem default value -# of time uncertainty threshold will be used. -#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0 - -# If constrained time uncertainty mode is enabled, -# this setting specifies the power budget that -# gps engine is allowed to spend to maintain the time -# uncertainty. -# Default is 0 meaning that GPS engine is not constained -# by power budget and can spend as much power as needed. -# In unit of 0.1 milli watt second. -#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0 - -################################################## -# POSITION ASSISTED CLOCK ESTIMATOR -################################################## -# 0 : disabled (default) -# 1 : enabled -# This setting enables GPS engine to estimate clock -# bias and drift when the signal from at least 1 -# SV is available and the UE’s position is known by -# other position engines. -#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0 - -##################################### -# proxyAppPackageName -##################################### -# This is a string that is sent to the framework -# in nfwNotifyCb callback -PROXY_APP_PACKAGE_NAME = com.google.android.carrierlocation - -##################################### -# CP_MTLR_ES -##################################### -# CP MTLR ES, 1=enable, 0=disable -CP_MTLR_ES=0 diff --git a/proprietary/vendor/etc/gpsconfig.xml b/proprietary/vendor/etc/gpsconfig.xml deleted file mode 100644 index af76030..0000000 --- a/proprietary/vendor/etc/gpsconfig.xml +++ /dev/null @@ -1,112 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/proprietary/vendor/etc/lhd.conf b/proprietary/vendor/etc/lhd.conf deleted file mode 100644 index cfbbe01..0000000 --- a/proprietary/vendor/etc/lhd.conf +++ /dev/null @@ -1,34 +0,0 @@ -PortName=tcp:127.0.0.1:300 -LheName=bbd -LheSerialControl=BBD:Serial=TTY - -GpioNStdbyPath=/sys/devices/platform/soc/890000.spi/spi_master/spi32766/spi32766.0/nstandby - -LhePatch=/vendor/etc/SensorHub.patch - -GpioDelayMs=255 -LheBbdPacket=/dev/ttyBCM -#LheBbdReliable=/dev/bbd_reliable -LheBbdControl=/dev/bbd_control -#LheBbdSensor=/dev/bbd_sensor -# LheDriverDebugFlags=PATCH_BBD:LHE_BBD - -# For developement stage, we need to set this on. -# For production stage, we should set this off. -# LheFailSafe=ON -LheFailSafe=/data/vendor/gps/log/lhd/esw-crash-dump.bin -# LheFailSafe=LOG - -Lhe477xDebugFlags=RPC:FACILITY=65535-dKP+CUST+LHE:LOG_INFO:STDOUT_PUTS:STDOUT_LOG -LheConsole=/data/vendor/gps/LheConsole - -LogEnabled=true -Log=FILE -LogDirectory=/data/vendor/gps/log/lhd -NvStorageDir=/data/vendor/gps/ - -## MuxMode setting: -#ExtLNA for GNSS -SkipSensorWakeLock=true -MaxLogDirSizeMb=20 -LogLineThreshold=40000