From 8a61f921a5b7412e8ffa3ac5a76eb74e9e67707c Mon Sep 17 00:00:00 2001 From: Giovanni Ricca Date: Sun, 19 Feb 2023 20:09:03 +0100 Subject: [PATCH] msm8953-common: Move gps configs on device tree Change-Id: I4835fd158ba3e2aa05d456b26bf7f55bc3a0899d --- msm8953-common-vendor.mk | 6 - proprietary/vendor/etc/flp.conf | 60 ------ proprietary/vendor/etc/gps.conf | 328 ----------------------------- proprietary/vendor/etc/izat.conf | 275 ------------------------ proprietary/vendor/etc/lowi.conf | 27 --- proprietary/vendor/etc/sap.conf | 161 -------------- proprietary/vendor/etc/xtwifi.conf | 78 ------- 7 files changed, 935 deletions(-) delete mode 100644 proprietary/vendor/etc/flp.conf delete mode 100644 proprietary/vendor/etc/gps.conf delete mode 100644 proprietary/vendor/etc/izat.conf delete mode 100644 proprietary/vendor/etc/lowi.conf delete mode 100644 proprietary/vendor/etc/sap.conf delete mode 100644 proprietary/vendor/etc/xtwifi.conf diff --git a/msm8953-common-vendor.mk b/msm8953-common-vendor.mk index 6dc1ac7..9dd7abf 100644 --- a/msm8953-common-vendor.mk +++ b/msm8953-common-vendor.mk @@ -150,8 +150,6 @@ PRODUCT_COPY_FILES += \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/data/dsi_config.xml:$(TARGET_COPY_OUT_VENDOR)/etc/data/dsi_config.xml \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/data/netmgr_config.xml:$(TARGET_COPY_OUT_VENDOR)/etc/data/netmgr_config.xml \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/diracmobile.config:$(TARGET_COPY_OUT_VENDOR)/etc/diracmobile.config \ - vendor/xiaomi/msm8953-common/proprietary/vendor/etc/flp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/flp.conf \ - vendor/xiaomi/msm8953-common/proprietary/vendor/etc/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/init/android.hardware.bluetooth@1.0-service-qti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/android.hardware.bluetooth@1.0-service-qti.rc \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/init/android.hardware.drm@1.2-service.widevine.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/android.hardware.drm@1.2-service.widevine.rc \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/init/android.hardware.gnss@2.0-service-qti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/android.hardware.gnss@2.0-service-qti.rc \ @@ -172,19 +170,15 @@ PRODUCT_COPY_FILES += \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/init/vendor.qti.hardware.perf@2.0-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.hardware.perf@2.0-service.rc \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/init/vendor.qti.hardware.qdutils_disp@1.0-service-qti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.hardware.qdutils_disp@1.0-service-qti.rc \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/init/vendor.qti.hardware.tui_comm@1.0-service-qti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.hardware.tui_comm@1.0-service-qti.rc \ - vendor/xiaomi/msm8953-common/proprietary/vendor/etc/izat.conf:$(TARGET_COPY_OUT_VENDOR)/etc/izat.conf \ - vendor/xiaomi/msm8953-common/proprietary/vendor/etc/lowi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/lowi.conf \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/msm_irqbalance.conf:$(TARGET_COPY_OUT_VENDOR)/etc/msm_irqbalance.conf \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/perf/commonresourceconfigs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/perf/commonresourceconfigs.xml \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/perf/perfboostsconfig.xml:$(TARGET_COPY_OUT_VENDOR)/etc/perf/perfboostsconfig.xml \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/perf/perfconfigstore.xml:$(TARGET_COPY_OUT_VENDOR)/etc/perf/perfconfigstore.xml \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/perf/targetconfig.xml:$(TARGET_COPY_OUT_VENDOR)/etc/perf/targetconfig.xml \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/perf/targetresourceconfigs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/perf/targetresourceconfigs.xml \ - vendor/xiaomi/msm8953-common/proprietary/vendor/etc/sap.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sap.conf \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/seccomp_policy/mediacodec.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/mediacodec.policy \ vendor/xiaomi/msm8953-common/proprietary/vendor/etc/sensors/hals.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/hals.conf \ - vendor/xiaomi/msm8953-common/proprietary/vendor/etc/xtwifi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/xtwifi.conf \ vendor/xiaomi/msm8953-common/proprietary/vendor/firmware/a506_zap.b00:$(TARGET_COPY_OUT_VENDOR)/firmware/a506_zap.b00 \ vendor/xiaomi/msm8953-common/proprietary/vendor/firmware/a506_zap.b01:$(TARGET_COPY_OUT_VENDOR)/firmware/a506_zap.b01 \ vendor/xiaomi/msm8953-common/proprietary/vendor/firmware/a506_zap.b02:$(TARGET_COPY_OUT_VENDOR)/firmware/a506_zap.b02 \ diff --git a/proprietary/vendor/etc/flp.conf b/proprietary/vendor/etc/flp.conf deleted file mode 100644 index 65d54d3..0000000 --- a/proprietary/vendor/etc/flp.conf +++ /dev/null @@ -1,60 +0,0 @@ -################################### -##### FLP settings ##### -################################### - -################################### -# FLP BATCH SIZE -################################### -# The number of batched locations -# requested to modem. The desired number -# defined below may not be satisfied, as -# the modem can only return the number -# of batched locations that can be allocated, -# which is limited by memory. The default -# batch size defined as 20 as below. -BATCH_SIZE=20 - -################################### -# FLP OUTDOOR TRIP BATCH SIZE -################################### -# The number of batched locations -# requested to modem for outdoor -# trip batching. The desired number -# defined below may not be satisfied, as -# the modem can only return the number -# of batched locations that can be allocated, -# which is limited by memory. The default -# trip batch size defined as 600 as below. -OUTDOOR_TRIP_BATCH_SIZE=600 - -################################### -# FLP BATCHING SESSION TIMEOUT -################################### -# Duration with which batch session timeout -# happens in milliseconds. If not specified -# or set to zero, batching session timeout -# defaults to 20 seconds by the modem. -# BATCH_SESSION_TIMEOUT=20000 - -################################### -# FLP BATCHING ACCURACY -################################### -# Set to one of the defined values below -# to define the accuracy of batching. -# If not specified, accuracy defaults -# to LOW. -# FLP BATCHING ACCURACY values: -# Low accuracy = 0 -# Medium accuracy = 1 -# High accuracy = 2 -ACCURACY=1 - -#################################### -# By default if network fixes are not sensor assisted -# these fixes must be dropped. This parameter adds an exception -# for targets where there is no PDR and we still want to -# report out network fixes -# 0: MUST NOT ALLOW NETWORK FIXES -# 1: ALLOW NETWORK FIXES -#################################### -ALLOW_NETWORK_FIXES = 0 diff --git a/proprietary/vendor/etc/gps.conf b/proprietary/vendor/etc/gps.conf deleted file mode 100644 index 474c0ca..0000000 --- a/proprietary/vendor/etc/gps.conf +++ /dev/null @@ -1,328 +0,0 @@ -#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin -#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin -#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin -#Version check for XTRA -#DISABLE = 0 -#AUTO = 1 -#XTRA2 = 2 -#XTRA3 = 3 -XTRA_VERSION_CHECK=0 - -# Error Estimate -# _SET = 1 -# _CLEAR = 0 -ERR_ESTIMATE=0 - -#NTP server -NTP_SERVER=time.izatcloud.net - -#XTRA CA path -XTRA_CA_PATH=/system/etc/security/cacerts - -# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info -# 4 - Debug, 5 - Verbose -# If DEBUG_LEVEL is commented, Android's logging levels will be used -DEBUG_LEVEL = 3 - -# Intermediate position report, 1=enable, 0=disable -INTERMEDIATE_POS=0 - -# supl version 1.0 -SUPL_VER=0x10000 - -# Emergency SUPL, 1=enable, 0=disable -#SUPL_ES=1 - -#Choose PDN for Emergency SUPL -#1 - Use emergency PDN -#0 - Use regular SUPL PDN for Emergency SUPL -#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0 - -#SUPL_MODE is a bit mask set in config.xml per carrier by default. -#If it is uncommented here, this value will overwrite the value from -#config.xml. -#MSA=0X2 -#MSB=0X1 -#SUPL_MODE= - -# GPS Capabilities bit mask -# SCHEDULING = 0x01 -# MSB = 0x02 -# MSA = 0x04 -# ON_DEMAND_TIME = 0x10 -# GEOFENCE = 0x20 -# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE -CAPABILITIES=0x37 - -# Accuracy threshold for intermediate positions -# less accurate positions are ignored, 0 for passing all positions -# ACCURACY_THRES=5000 - -################################ -##### AGPS server settings ##### -################################ - -# FOR SUPL SUPPORT, set the following -# SUPL_HOST=supl.host.com or IP -# SUPL_PORT=1234 - -# FOR MO SUPL SUPPORT, set the following -# MO_SUPL_HOST=supl.host.com or IP -# MO_SUPL_PORT=1234 - -# FOR C2K PDE SUPPORT, set the following -# C2K_HOST=c2k.pde.com or IP -# C2K_PORT=1234 - -# Bitmask of slots that are available -# for write/install to, where 1s indicate writable, -# and the default value is 0 where no slots -# are writable. For example, AGPS_CERT_WRITABLE_MASK -# of b1000001010 makes 3 slots available -# and the remaining 7 slots unwritable. -#AGPS_CERT_WRITABLE_MASK=0 - -#################################### -# LTE Positioning Profile Settings -#################################### -# 0: Enable RRLP on LTE(Default) -# 1: Enable LPP_User_Plane on LTE -# 2: Enable LPP_Control_Plane -# 3: Enable both LPP_User_Plane and LPP_Control_Plane -LPP_PROFILE = 2 - -#################################### -#Datum Type -#################################### -# 0: WGS-84 -# 1: PZ-90 -DATUM_TYPE = 0 - -################################ -# EXTRA SETTINGS -################################ -# NMEA provider (1=Modem Processor, 0=Application Processor) -NMEA_PROVIDER=0 - -# Customized NMEA GGA fix quality that can be used to tell -# whether SENSOR contributed to the fix. -# -# When this configuration item is not enabled (set to any value that is not 1), -# GGA fix quality conforms to NMEA standard spec as below: -# PPP/DGNSS/SBAS correction fix w/ or w/o sensor: 2 -# RTK fixed fix w/ or w/o sensor: 4 -# RTK float fix w/ or w/o sensor: 5 -# SPE fix w/ or w/o sensor: 1 -# Sensor dead reckoning fix: 6 -# -# When this configuration is enabled (set to 1), GGA fix quality -# will be output as below: -# PPP fix w/o sensor: 59, w/ sensor: 69 -# DGNSS/SBAS correction fix w/o sensor: 2, w/ sensor: 62 -# RTK fixed fix w/o sensor: 4, w/ sensor: 64 -# RTK float fix w/o sensor: 5, w/ sensor: 65, -# SPE fix w/o sensor: 1, and w/ sensor: 61 -# Sensor dead reckoning fix: 6 -# -# any value that is not 1 - disabled -# 1 - enabled -CUSTOM_NMEA_GGA_FIX_QUALITY_ENABLED = 0 - -# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) -SGLTE_TARGET=0 - -################################################## -# Select Positioning Protocol on A-GLONASS system -################################################## -# 0x1: RRC CPlane -# 0x2: RRLP UPlane -# 0x4: LLP Uplane -A_GLONASS_POS_PROTOCOL_SELECT = 0 - -################################################## -# Select technology for LPPe Control Plane -################################################## -# 0x1: DBH for LPPe CP -# 0x2: WLAN AP Measurements for LPPe CP -# 0x4: SRN AP measurement for CP -# 0x8: Sensor Barometer Measurement LPPe CP -#LPPE_CP_TECHNOLOGY = 0 - -################################################## -# Select technology for LPPe User Plane -################################################## -# 0x1: DBH for LPPe UP -# 0x2: WLAN AP Measurements for LPPe UP -# 0x4: SRN AP measurement for UP -# 0x8: Sensor Barometer Measurement LPPe UP -#LPPE_UP_TECHNOLOGY = 0 - -################################################## -# AGPS_CONFIG_INJECT -################################################## -# enable/disable injection of AGPS configurations: -# SUPL_VER -# SUPL_HOST -# SUPL_PORT -# MO_SUPL_HOST -# MO_SUPL_PORT -# C2K_HOST -# C2K_PORT -# LPP_PROFILE -# A_GLONASS_POS_PROTOCOL_SELECT -# 0: disable -# 1: enable -AGPS_CONFIG_INJECT = 1 - -################################################## -# GNSS settings for automotive use cases -# Configurations in following section are -# specific to automotive use cases, others -# please do not change, keep the default values -################################################## - -# AP Coarse Timestamp Uncertainty -################################################## -# default : 10 -# AP time stamp uncertainty, until GNSS receiver -# is able to acquire better timing information -AP_TIMESTAMP_UNCERTAINTY = 10 - -################################################## -# QDR engine availability status -################################################## -# 0 : NO QDR (default) -# 1 : QDR enabled -# This settings enables QDR Configuration for -# automotive use case, if enabled then -# DR_AP_Service needs to be enabled in izat.conf -#EXTERNAL_DR_ENABLED = 0 - -##################################### -# DR_SYNC Pulse Availability -##################################### -# 0 : DR_SYNC pulse not available (default) -# 1 : DR_SYNC pulse available -# This configuration enables the driver to make use -# of PPS events generated by DR_SYNC pulse -# Standard Linux PPS driver needs to be enabled -DR_SYNC_ENABLED = 0 - -##################################### -# PPS Device name -##################################### -PPS_DEVICENAME = /dev/pps0 - -##################################### -# Ignore PPS at Startup and after long outage -##################################### -IGNORE_PPS_PULSE_COUNT = 1 - -##################################### -# Long GNSS RF outage in seconds -##################################### -GNSS_OUTAGE_DURATION = 10 - -##################################### -# AP Clock Accuracy -##################################### -# Quality of APPS processor clock (in PPM). -# Value specified is used for calculation of -# APPS time stamp uncertainty -AP_CLOCK_PPM = 100 - -##################################### -# MAX ms difference to detect missing pulse -##################################### -# Specifies time threshold in ms to validate any missing PPS pulses -MISSING_PULSE_TIME_DELTA = 900 - -##################################### -# Propagation time uncertainty -##################################### -# This settings enables time uncertainty propagation -# logic incase of missing PPS pulse -PROPAGATION_TIME_UNCERTAINTY = 1 - -####################################### -# APN / IP Type Configuration -# APN and IP Type to use for setting -# up WWAN call. -# Use below values for IP Type: -# v4 = 4 -# v6 = 6 -# v4v6 = 10 -####################################### -# INTERNET_APN = abc.xyz -# INTERNET_IP_TYPE = 4 -# SUPL_APN = abc.xyz -# SUPL_IP_TYPE = 4 - -##################################### -# Modem type -##################################### -# This setting configures modem type -# (external=0 or internal=1) -# comment out the next line to vote -# for the first modem in the list -MODEM_TYPE = 1 - -################################################## -# CONSTRAINED TIME UNCERTAINTY MODE -################################################## -# 0 : disabled (default) -# 1 : enabled -# This setting enables GPS engine to keep its time -# uncertainty below the specified constraint -#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0 - -# If constrained time uncertainty mode is enabled, -# this setting specifies the time uncertainty -# threshold that gps engine need to maintain. -# In unit of milli-seconds. -# Default is 0.0 meaning that modem default value -# of time uncertainty threshold will be used. -#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0 - -# If constrained time uncertainty mode is enabled, -# this setting specifies the power budget that -# gps engine is allowed to spend to maintain the time -# uncertainty. -# Default is 0 meaning that GPS engine is not constained -# by power budget and can spend as much power as needed. -# In unit of 0.1 milli watt second. -#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0 - -################################################## -# POSITION ASSISTED CLOCK ESTIMATOR -################################################## -# 0 : disabled (default) -# 1 : enabled -# This setting enables GPS engine to estimate clock -# bias and drift when the signal from at least 1 -# SV is available and the UE’s position is known by -# other position engines. -#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0 - -##################################### -# proxyAppPackageName -##################################### -# This is a string that is sent to the framework -# in nfwNotifyCb callback -PROXY_APP_PACKAGE_NAME = com.google.android.carrierlocation - -##################################### -# CP_MTLR_ES -##################################### -# CP MTLR ES, 1=enable, 0=disable -CP_MTLR_ES=0 - -################################################## -# GNSS_DEPLOYMENT -################################################## -# 0 : Enable QTI GNSS (default) -# 1 : Enable QCSR SS5 -# This setting use to select between QTI GNSS -# and QCSR SS5 hardware receiver. -# By default QTI GNSS receiver is enabled. -# GNSS_DEPLOYMENT = 0 diff --git a/proprietary/vendor/etc/izat.conf b/proprietary/vendor/etc/izat.conf deleted file mode 100644 index c53a585..0000000 --- a/proprietary/vendor/etc/izat.conf +++ /dev/null @@ -1,275 +0,0 @@ -######################################### -# Log verbosity control for izat modules -######################################### -# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5 -IZAT_DEBUG_LEVEL = 2 - -################################################## -# Select WIFI Wait Timeout value in seconds for SUPL -################################################## -WIFI_WAIT_TIMEOUT_SELECT = 0 - -################################################## -# Time interval of injecting SRN scan data to modem -# time in seconds. -# Note: recommended value is between 1-5 sec -################################################## -LPPE_SRN_DATA_SCAN_INJECT_TIME=2 - -################################ -# NLP Settings -################################ -# NLP_MODE 1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred -# For Automotive products, please use NLP_MODE = 4 only. -# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode -# to determine how much Tolerance for first position -# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode -# to determine how much Tolerance for positions after first -# NLP_THRESHOLD: Sets how many failures needed before -# switching preferred NLP in Combo mode -# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy -# must be, in multiples, between two NLP location reports to -# be considered much worse accuracy. Used in switching logic -# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines -# whether or not to still send network location requests to -# QNP when the EULA is not consented to by the user. QNP can -# still return ZPP locations or injected locations even -# without EULA consent, but the uncertainty can be high. -# QNP preferred mode prefers QNP when there is EULA consent, -# otherwise OSNLP is used. -NLP_MODE = 1 -NLP_MODE_EMERGENCY = 2 -NLP_TOLERANCE_TIME_FIRST = 5000 -NLP_TOLERANCE_TIME_AFTER = 20000 -NLP_THRESHOLD = 3 -NLP_ACCURACY_MULTIPLE = 2 -NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1 - -######################################### -# NLP PACKAGE SETTINGS -######################################### -# OSNLP_PACKAGE: name of default NLP package -OSNLP_PACKAGE = com.google.android.gms -# REGION_OSNLP_PACKAGE: -# This value will be used as alternative -# for particular region where default NLP is not functional. -#REGION_OSNLP_PACKAGE = - -################################### -# GEOFENCE SERVICES -################################### -# If set to one of the defined values below, it will override -# the responsiveness for geofence services, which implements -# the Proximity Alert API. If not set to a value defined below, -# which is default, it will not override the responsivness. -# The geofence HAL API is unaffected by this value. -# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values: -# 1: LOW responsiveness -# 2: MEDIUM responsiveness -# 3: HIGH responsiveness -GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0 - -##################################### -#GTP Opt-In app -##################################### - -#GTP privacy policy version url -#https support is required -GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html - -#GTP privacy policy version download retry interval -#unit is second. default is 86400 -GTP_PRIVACY_RETRY_INTERVAL = 86400 - -##################################### -# IZAT PREMIUM FEATURE SETTINGS -##################################### -#Possible states of a feature: -#DISABLED -#BASIC -#PREMIUM - -#GTP_MODE valid modes: -# DISABLED -# LEGACY_WWAN -# SDK (WWAN not available for Modems before LocTech 10.0) -GTP_MODE=DISABLED - -#GTP_WAA valid modes: -# DISABLED -# BASIC -GTP_WAA=DISABLED - -#SAP valid modes: -# DISABLED -# BASIC -# PREMIUM -# MODEM_DEFAULT -SAP=MODEM_DEFAULT - -#FREE_WIFI_SCAN_INJECT valid modes: -#DISABLED -#BASIC -FREE_WIFI_SCAN_INJECT=BASIC - -#SUPL_WIFI valid modes: -#DISABLED -#BASIC -SUPL_WIFI=BASIC - -#WIFI_SUPPLICANT_INFO valid modes: -#DISABLED -#BASIC -WIFI_SUPPLICANT_INFO=BASIC - -##################################### -# Location process launcher settings -##################################### - -# DO NOT MODIFY -# Modifying below attributes without -# caution can have serious implications. - -#Values for PROCESS_STATE: -# ENABLED -# DISABLED - -#Values for LOW_RAM_TARGETS: -# ENABLED -# DISABLED -# Property to enable/disable processes for low ram targets. Uses ro.config.low_ram property -# to identify low ram targets. - -#PROCESS_NAME -# Name of the executable file. - -#FEATURE MASKS: -# GTP-WIFI 0X03 -# GTP-MP-CELL 0xc00 -# GTP-WAA 0x100 -# SAP 0Xc0 -# ODCPI 0x1000 -# FREE_WIFI_SCAN_INJECT 0x2000 -# SUPL_WIFI 0x4000 -# WIFI_SUPPLICANT_INFO 0x8000 - -#Values for PLATFORMS can be: -#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226 -#2. 'all' or 'all exclude' -> for All platforms -#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937 - -#Values for SOC_IDS can be: -#1. Any valid values obtained from soc_id node separated by single space. For example: 339 386 436 -## soc_id value can be obtained from any one of below node: -## - /sys/devices/soc0/soc_id -## - /sys/devices/system/soc/soc0/id -#2. 'all' or 'all exclude' -> for All soc id's -#3. 'all exclude XXXX' -> All soc id's exclude XXXX. For example: all exclude 339 386 - -#Values for BASEBAND can be: -#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2 -#2. 'all' or 'all exclude' -> for all basebands -#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte -PROCESS_NAME=lowi-server -PROCESS_ARGUMENT= -PROCESS_STATE=ENABLED -PROCESS_GROUPS=gps wifi inet oem_2901 -PREMIUM_FEATURE=0 -IZAT_FEATURE_MASK=0xf303 -PLATFORMS=all -SOC_IDS=all -BASEBAND=all -LOW_RAM_TARGETS=DISABLED -HARDWARE_TYPE=all -VENDOR_ENHANCED_PROCESS=0 - -PROCESS_NAME=xtwifi-inet-agent -PROCESS_ARGUMENT= -PROCESS_STATE=ENABLED -PROCESS_GROUPS=inet gps -PREMIUM_FEATURE=1 -IZAT_FEATURE_MASK=0xc03 -PLATFORMS=all -SOC_IDS=all exclude 386 436 -BASEBAND=all -LOW_RAM_TARGETS=DISABLED -HARDWARE_TYPE=all -VENDOR_ENHANCED_PROCESS=1 - -PROCESS_NAME=xtwifi-client -PROCESS_ARGUMENT= -PROCESS_STATE=ENABLED -PROCESS_GROUPS=wifi inet gps system oem_2904 -PREMIUM_FEATURE=1 -IZAT_FEATURE_MASK=0xd03 -PLATFORMS=all -SOC_IDS=all exclude 386 436 -BASEBAND=all -LOW_RAM_TARGETS=DISABLED -HARDWARE_TYPE=all -VENDOR_ENHANCED_PROCESS=1 - -PROCESS_NAME=slim_daemon -PROCESS_ARGUMENT= -PROCESS_STATE=ENABLED -PROCESS_GROUPS=gps oem_2901 can plugdev diag sensors -PREMIUM_FEATURE=1 -IZAT_FEATURE_MASK=0xf0 -PLATFORMS=all -SOC_IDS=all exclude 386 436 -BASEBAND=all -LOW_RAM_TARGETS=DISABLED -HARDWARE_TYPE=all -VENDOR_ENHANCED_PROCESS=1 - -PROCESS_NAME=xtra-daemon -PROCESS_ARGUMENT= -PROCESS_STATE=ENABLED -PROCESS_GROUPS=inet gps system -PREMIUM_FEATURE=0 -IZAT_FEATURE_MASK=0 -PLATFORMS=all -SOC_IDS=all -BASEBAND=all -LOW_RAM_TARGETS=ENABLED -HARDWARE_TYPE=all -VENDOR_ENHANCED_PROCESS=0 - -######################################## -# Engine Service which host DRE module # -# To enable DRE engine service, change # -# PROCESS_STATE=ENABLED # -######################################## -PROCESS_NAME=engine-service -PROCESS_ARGUMENT=DRE-INT libloc_epDr.so -PROCESS_STATE=DISABLED -PROCESS_GROUPS=gps diag inet qwes oem_2901 system -PREMIUM_FEATURE=0 -IZAT_FEATURE_MASK=0 -PLATFORMS=all -SOC_IDS=all -BASEBAND=all -LOW_RAM_TARGETS=DISABLED -HARDWARE_TYPE=all -VENDOR_ENHANCED_PROCESS=1 - -######################################## -# Engine Service which host PPE module # -# To enable PPE engine service, change # -# PROCESS_STATE=ENABLED # -# and update process arugements # -# with PPE library name # -#PROCESS_ARGUMENT=PPE libepsimulator.so# -######################################## -PROCESS_NAME=engine-service -PROCESS_ARGUMENT=PPE libepsimulator.so -PROCESS_STATE=DISABLED -PROCESS_GROUPS=gps diag inet oem_2901 -PREMIUM_FEATURE=0 -IZAT_FEATURE_MASK=0 -PLATFORMS=all -SOC_IDS=all -BASEBAND=all -LOW_RAM_TARGETS=DISABLED -HARDWARE_TYPE=all -VENDOR_ENHANCED_PROCESS=1 diff --git a/proprietary/vendor/etc/lowi.conf b/proprietary/vendor/etc/lowi.conf deleted file mode 100644 index 5006b59..0000000 --- a/proprietary/vendor/etc/lowi.conf +++ /dev/null @@ -1,27 +0,0 @@ -#*====*====*====*====*====*====*====*====*====*====*====*====*====*====*====* -# -# LOWI Config file -# -# GENERAL DESCRIPTION -# This file contains the config params for LOWI -# -# Copyright (c) 2019 Qualcomm Technologies, Inc. -# All Rights Reserved. -# Confidential and Proprietary - Qualcomm Technologies, Inc. -# -# 2012-2013 Qualcomm Atheros, Inc. -# All Rights Reserved. -# Qualcomm Atheros Confidential and Proprietary. -# -# Export of this technology or software is regulated by the U.S. Government. -# Diversion contrary to U.S. law prohibited. -#=============================================================================*/ - -# X86 ONLY - UBUNTU: -# Copy this file in the same directory where the executable is - -# Log level -# EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100 -LOWI_LOG_LEVEL = 3 -LOWI_USE_LOWI_LP = 0 - diff --git a/proprietary/vendor/etc/sap.conf b/proprietary/vendor/etc/sap.conf deleted file mode 100644 index 0f71794..0000000 --- a/proprietary/vendor/etc/sap.conf +++ /dev/null @@ -1,161 +0,0 @@ -################################ -# Sensor Settings -################################ -#The following parameters are optional. -#Internal defaults support MEMS sensors -#native to most handset devices. -#Device specific sensor characterization -#for improved performance is possible as -#described in SAP application notes. -#GYRO_BIAS_RANDOM_WALK= -#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY= -#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY= -#RATE_RANDOM_WALK_SPECTRAL_DENSITY= -#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY= - -# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0) -# used in loc_eng_reinit -SENSOR_ACCEL_BATCHES_PER_SEC=2 -SENSOR_ACCEL_SAMPLES_PER_BATCH=5 -SENSOR_GYRO_BATCHES_PER_SEC=2 -SENSOR_GYRO_SAMPLES_PER_BATCH=5 -# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0) -SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4 -SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25 -SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4 -SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25 - -# Sensor Control Mode (0=AUTO, 1=FORCE_ON, 2=MODEM_DEFAULT) -# used in loc_eng_reinit -SENSOR_CONTROL_MODE=2 - -# Bit mask used to define which sensor algorithms are used. -# Setting each bit has the following definition: -# 0x1 - DISABLE_INS_POSITIONING_FILTER -# 0x0 - ENABLE_INS_POSITIONING_FILTER -SENSOR_ALGORITHM_CONFIG_MASK=0x0 - -#Vehicle Network Provider configuration - -#Service configuration strings -#The number before colon in VN_X items defines version of the format of the rest of the string -#VN_ACCEL_CFG=0:5 -#VN_GYRO_CFG=0:5.5 -#VN_ODOMETRY_CFG=0:2,4.5 - -################################################ -# QDR3 configurations # -################################################ -VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2 -VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8 - -################################################ -# QDR2-Gyro configurations # -################################################ -#VN_GYRO_CFG=1:555,0,1,0,0,0,0,-6.5,6.6066,-6.5,-1.00,2,6.607,6.6068,0,0,16,0.0002,0,16,0.0002,0,16,0.0002 -#VN_SPEED_CFG=1:555,0,0,1,2,1,0.01,0,56,8,48,8 -#VN_GEAR_CFG=1:555,16,4,0,1,1,9,0,1,2,3,4,5,6,7,8 - -################################################ -# QDR2-DWT configurations # -################################################ -#VN_SPEED_CFG=1:555,22,1,2,1,1,1,0,8,8,23,1,2,0,1,0,8,8,23,1 -#VN_GEAR_CFG=1:555,12,4,16,14,16,8,1,2,3,4,5,6,7,8 -#VN_DWS_CFG=1:555,0,0,1,3,1,1,0,0,8,0,0,8,8,0,0,16,8,0,0,24,8,0,0 -#VN_GYRO_CFG=1:555,40,16,1.0,40,16,1.0,40,16,1.0 - -##################################################################################### -# VNW service batching configuration strings # -# VNW provider will initialize default type as Time based batching # -# Each service batch value is configured to be 100 # -# VN_ACCEL_CFG_BATCH_VALUE will be treated as time in Ms if VN_CFG_BATCH_TYPE # -# is set to time based batching # -# VN_ACCEL_CFG_BATCH_VALUE will be treated as sample count if VN_CFG_BATCH_TYPE # -# is set to count based batching # -# Uncomment and update batch time /sample count as per selected batching type # -##################################################################################### -# Batching type -# 1 - Time based (default) -# 2 - Count based -#VN_CFG_BATCH_TYPE=1 - -#Vehicle Accel batching value, it can either accept time in milli seconds or sample count -#VN_ACCEL_CFG_BATCH_VALUE=100 - -#Vehicle Gyro batching value, it can either accept time in milli seconds or sample count -#VN_GYRO_CFG_BATCH_VALUE=100 - -#Vehicle Odo batching value, it can either accept time in milli seconds or sample count -#VN_ODOMETRY_CFG_BATCH_VALUE=100 - -#Vehicle Speed batching value, it can either accept time in milli seconds or sample count -#VN_SPEED_CFG_BATCH_VALUE=100 - -#Vehicle Gear batching value, it can either accept time in milli seconds or sample count -#VN_GEAR_CFG_BATCH_VALUE=100 - -#Vehicle DWS batching value, it can either accept time in milli seconds or sample count -#VN_DWS_CFG_BATCH_VALUE=100 -#################################################################################### - -#Procesors clock ratio: AP and CAN bus microcontroller -################################################ -# QDR3 configurations # -################################################ -VN_PROC_CLOCK_RATIO=1.0 - -################################################ -# QDR2-DWT OR QDR2-Gyro configurations # -################################################ -#VN_PROC_CLOCK_RATIO = 1.0 - -# Time source used by Sensor HAL -# Setting this value controls accuracy of location sensor services. -# 0 - Unknown -# 1 - CLOCK_BOOTTIME -# 2 - CLOCK_MONOTONIC -# 3 - CLOCK_REALTIME -# 4 - CLOCK_BOOTTIME using Alarm timer interface -NDK_PROVIDER_TIME_SOURCE=1 - -# Sensor Batching Configuration -# 0 - Time based -# 1 - Fixed count based -# 2 - Variable count based -COUNT_BASED_BATCHING=1 -SYNC_ONCE=0 - -#Sensor HAL Provider Configuration HAL Library name including path -################################################ -# # -# Configuration for BMI 160 Sensor # -# # -################################################ -SENSOR_TYPE=2 -SENSOR_HAL_LIB_PATH=/usr/lib/libbmi160sensors.so.1 - -################################################ -# # -# Configuration for ASM330 Sensor # -# # -################################################ -#SENSOR_TYPE=1 -#SENSOR_HAL_LIB_PATH=/usr/lib/libasm330sensors.so.1 - - -################################################ -# # -# Configuration for IAM20680 Sensor # -# # -################################################ -#SENSOR_TYPE=3 -#SENSOR_HAL_LIB_PATH=/usr/lib/libiam20680sensors.so.1 - - -################################################ -# # -# Configuration for SMI130 Sensor # -# # -################################################ -#SENSOR_TYPE=4 -#SENSOR_HAL_LIB_PATH=/usr/lib/libsmi130sensors.so.1 diff --git a/proprietary/vendor/etc/xtwifi.conf b/proprietary/vendor/etc/xtwifi.conf deleted file mode 100644 index 5d7df9e..0000000 --- a/proprietary/vendor/etc/xtwifi.conf +++ /dev/null @@ -1,78 +0,0 @@ -#GTP AP Project client core config file -# -#GENERAL DESCRIPTION -#This is used by client core -# -#Copyright (c) 2012-2014 Qualcomm Atheros, Inc. -#All Rights Reserved. -#Qualcomm Atheros Confidential and Proprietary. -# -#Copyright (c) 2017 Qualcomm Technologies, Inc. -#All Rights Reserved. -#Confidential and Proprietary - Qualcomm Technologies, Inc. - -############################################################################## -# non-IOT devices configuration items # -# For non-IOT devices, configure below configuration items # -# according to the app note: 80-NK218-1 and remove the configuration items # -# in section of "IOT devices configuration items". # -############################################################################## - -# ASN URI v2 to be used by some GTP AP modules that -# need to run with ASN URI v2 protocol. -XT_SERVER_ROOT_URL = https://gtp1.izatcloud.net:443/uds/v2 - -# ASN URI v3 to be used by GTP AP modules that -# can support ASN URI v3 protocol. -XT_SERVER_ROOT_URL_V3 = https://gtp1.izatcloud.net:443/uds/v3 - -# size, in bytes, of the cache on device -SIZE_BYTE_TOTAL_CACHE = 5000000 - -############################################################################## -# IOT devices configuration items # -# For IOT devices, configure below configuration items # -# according to the app note and remove the configuration items in section of # -# "non-IOT devices configuration items". # -############################################################################## - -# ASN URI v3 to be used by GTP AP modules that -# can support ASN URI v3 protocol. -# XT_SERVER_ROOT_URL_V3 = https://gtpma1.izatcloud.net:443/uds/v3 - -# 3: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed -# for any GTP requests, instead notification is sent to Izat SDK. -# WiFi crowdsourcing module is disabled. -# 4: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed -# for any GTP requests, instead notification is sent to Izat SDK. -# WiFi crowdsourcing module is active, also accessed via Izat SDK. -# GTP_AP_MODE = 4 - -# 1: MP cell features relies on GTP AP for either download or upload -# 0: MP cell features does not rely on GTP AP -# GTP_AP_NEEDED_BY_MP_CELL = 1 - -############################################################################## -# Configuration items applicable to all devices # -############################################################################## - -# Log verbosity control for most of the GTP WiFi system, including native and -# Java componenets -# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5, ALL = 100 -DEBUG_GLOBAL_LOG_LEVEL = 2 - -# this is used at the server side to distinguish uploads from different maker/model -# default "Qualcomm" -OEM_ID_IN_REQUEST_TO_SERVER = "Qualcomm" - -# this is used at the server side to distinguish uploads from different maker/model -# default "UNKNOWN" -MODEL_ID_IN_REQUEST_TO_SERVER = "UNKNOWN" - -############################################################################## -# Qualcomm Network Location Provider config # -############################################################################## - -# Accuracy Threshold for NLP position. Position exceeds thsi threshold will be filtered out. -# Default is 25000 meters. -LARGE_ACCURACY_THRESHOLD_TO_FILTER_NLP_POSITION = 25000