peridot: Import from V816.0.5.0.UNPMIXM

proprietary/vendor/bin/init.qcom.sensors.sh

@@ -0,0 +1,33 @@
+#!/vendor/bin/sh
+# Copyright (c) 2020 The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of The Linux Foundation nor
+#       the names of its contributors may be used to endorse or promote
+#       products derived from this software without specific prior written
+#       permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# Function to start sensors for SSC enabled platforms
+#
+cp /vendor/etc/sensors/scripts/* /data/vendor/sensors/scripts/
+chmod a+rw /data/vendor/sensors/scripts/*

proprietary/vendor/bin/init.qcom.usb.sh

@@ -0,0 +1,210 @@
+#!/vendor/bin/sh
+# Copyright (c) 2012-2018, 2020-2021 The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above
+#       copyright notice, this list of conditions and the following
+#       disclaimer in the documentation and/or other materials provided
+#       with the distribution.
+#     * Neither the name of The Linux Foundation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#      from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+# Changes from Qualcomm Innovation Center are provided under the following license:
+# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+# SPDX-License-Identifier: BSD-3-Clause-Clear
+#
+
+# Set platform variables
+soc_hwplatform=`cat /sys/devices/soc0/hw_platform 2> /dev/null`
+soc_machine=`cat /sys/devices/soc0/machine 2> /dev/null`
+soc_machine=${soc_machine:0:2}
+soc_id=`cat /sys/devices/soc0/soc_id 2> /dev/null`
+
+#
+# Check ESOC for external modem
+#
+# Note: currently only a single MDM/SDX is supported
+#
+esoc_name=`cat /sys/bus/esoc/devices/esoc0/esoc_name 2> /dev/null`
+
+target=`getprop ro.board.platform`
+
+#
+# Override USB default composition
+#
+if [ "$(getprop ro.build.type)" != "user" ]; then
+  # If USB persist config not set, set default configuration
+  if [ "$(getprop persist.vendor.usb.config)" == "" ]; then
+    if [ "$esoc_name" != "" ]; then
+	  setprop persist.vendor.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
+    else
+	  case "$(getprop ro.baseband)" in
+	      "apq")
+	          setprop persist.vendor.usb.config diag,adb
+	      ;;
+	      *)
+	      case "$soc_hwplatform" in
+	          "Dragon" | "SBC")
+	              setprop persist.vendor.usb.config diag,adb
+	          ;;
+                  *)
+		  case "$soc_machine" in
+		    "SA")
+	              setprop persist.vendor.usb.config diag,adb
+		    ;;
+		    *)
+	            case "$target" in
+	              "msm8996")
+	                  setprop persist.vendor.usb.config diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,adb
+		      ;;
+	              "msm8909")
+		          setprop persist.vendor.usb.config diag,serial_smd,rmnet_qti_bam,adb
+		      ;;
+	              "msm8937")
+			    if [ -d /config/usb_gadget ]; then
+				       setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
+			    else
+			               case "$soc_id" in
+				               "313" | "320")
+				                  setprop persist.vendor.usb.config diag,serial_smd,rmnet_ipa,adb
+				               ;;
+				               *)
+				                  setprop persist.vendor.usb.config diag,serial_smd,rmnet_qti_bam,adb
+				               ;;
+			               esac
+			    fi
+		      ;;
+	              "msm8953")
+			      if [ -d /config/usb_gadget ]; then
+				      setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
+			      else
+				      setprop persist.vendor.usb.config diag,serial_smd,rmnet_ipa,adb
+			      fi
+		      ;;
+	              "msm8998" | "sdm660" | "apq8098_latv")
+		          setprop persist.vendor.usb.config diag,serial_cdev,rmnet,adb
+		      ;;
+	              "monaco")
+		          setprop persist.vendor.usb.config diag,qdss,rmnet,adb
+		      ;;
+	              "sdm845" | "sdm710")
+		          setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
+		      ;;
+	              "msmnile" | "sm6150" | "trinket" | "lito" | "atoll" | "bengal" | "lahaina" | "holi" | \
+				  "taro" | "kalama" | "pineapple" | "blair" | "pitti" )
+			  setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,qdss,adb
+		      ;;
+		      "gen4")
+			  setprop persist.vendor.usb.config adb
+		      ;;
+	              *)
+		          setprop persist.vendor.usb.config diag,adb
+		      ;;
+                    esac
+		    ;;
+		  esac
+	          ;;
+	      esac
+	      ;;
+	  esac
+      fi
+  fi
+fi
+
+# This check is needed for GKI 1.0 targets where QDSS is not available
+if [ "$(getprop persist.vendor.usb.config)" == "diag,serial_cdev,rmnet,dpl,qdss,adb" -a \
+     ! -d /config/usb_gadget/g1/functions/qdss.qdss ]; then
+      setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
+fi
+
+# Start peripheral mode on primary USB controllers for Automotive platforms
+case "$soc_machine" in
+    "SA")
+	if [ -f /sys/bus/platform/devices/a600000.ssusb/mode ]; then
+	    default_mode=`cat /sys/bus/platform/devices/a600000.ssusb/mode`
+	    case "$default_mode" in
+		"none")
+		    echo peripheral > /sys/bus/platform/devices/a600000.ssusb/mode
+		;;
+	    esac
+	fi
+    ;;
+esac
+
+# check configfs is mounted or not
+if [ -d /config/usb_gadget ]; then
+	machine_type=`cat /sys/devices/soc0/machine`
+
+	# Chip ID & serial are used for unique MSM identification in Product String
+	# If not present, then omit them instead of using 0x00000000
+	msm_chipid=`cat /sys/devices/soc0/nproduct_id`;
+	if [ "$msm_chipid" != "" ]; then
+		msm_chipid_hex=`printf _CID:%04X $msm_chipid`
+	fi
+
+	msm_serial=`cat /sys/devices/soc0/serial_number`;
+	if [ "$msm_serial" != "" ]; then
+		msm_serial_hex=`printf _SN:%08X $msm_serial`
+	fi
+
+	setprop vendor.usb.product_string "$machine_type-$soc_hwplatform$msm_chipid_hex$msm_serial_hex"
+
+	# ADB requires valid iSerialNumber; if ro.serialno is missing, use dummy
+	serialnumber=`cat /config/usb_gadget/g1/strings/0x409/serialnumber 2> /dev/null`
+	if [ "$serialnumber" == "" ]; then
+		serialno=1234567
+		echo $serialno > /config/usb_gadget/g1/strings/0x409/serialnumber
+	fi
+	setprop vendor.usb.configfs 1
+fi
+
+# update product
+if [ "$(getprop ro.boot.factorybuild)" != "1" ]; then
+	marketname=`getprop ro.product.odm.marketname`
+	if [ "$marketname" != "" ]; then
+	    setprop vendor.usb.product_string "$marketname"
+	else
+	    setprop vendor.usb.product_string "$(getprop ro.product.model)"
+	fi
+fi
+
+#
+# Initialize RNDIS Diag option. If unset, set it to 'none'.
+#
+diag_extra=`getprop persist.vendor.usb.config.extra`
+if [ "$diag_extra" == "" ]; then
+	setprop persist.vendor.usb.config.extra none
+fi
+
+# enable rps cpus on msm8937 target
+setprop vendor.usb.rps_mask 0
+case "$soc_id" in
+	"294" | "295" | "353" | "354")
+		setprop vendor.usb.rps_mask 40
+	;;
+esac
+
+#
+# Initialize UVC conifguration.
+#
+if [ -d /config/usb_gadget/g1/functions/uvc.0 ]; then
+	setprop vendor.usb.uvc.function.init 1
+fi

proprietary/vendor/bin/init.qti.graphics.sh

@@ -0,0 +1,28 @@
+#! /vendor/bin/sh
+#==============================================================================
+#       init.qti.graphics.sh
+#
+#  Copyright (c) 2023 Qualcomm Technologies, Inc.
+#  All Rights Reserved.
+#  Confidential and Proprietary - Qualcomm Technologies, Inc.
+#===============================================================================
+
+egl_vendor=`getprop ro.hardware.egl`
+
+#Avoid setting the properties if already set
+if [[ "$egl_vendor" != "adreno" ]]; then
+    soc_subset_parts=0
+    if [ -f /sys/devices/soc0/subset_parts ]; then
+        soc_subset_parts=`cat /sys/devices/soc0/subset_parts` 2> /dev/null
+    fi
+
+    #GPU - bit 1
+    gpu_mask=0x00000002
+    is_no_gpu=$(( gpu_mask&soc_subset_parts ))
+
+    if [ $is_no_gpu -eq 2 ]; then
+        setprop vendor.display.gpu_rendering false
+    else
+        setprop vendor.display.gpu_rendering true
+    fi
+fi

proprietary/vendor/bin/init.qti.write.sh

@@ -0,0 +1,27 @@
+#!/vendor/bin/sh
+#=============================================================================
+# Copyright (c) 2021 Qualcomm Technologies, Inc.
+# All Rights Reserved.
+# Confidential and Proprietary - Qualcomm Technologies, Inc.
+#=============================================================================
+
+write_with_check() {
+	local i=60
+	while [ $i -gt 0 ]
+	do
+		if [ -f "$1" ]; then
+			break
+		fi
+
+		sleep 1
+		i=$(($i-1))
+	done
+
+	if [ ! -f "$1" ]; then
+		exit 1
+	fi
+
+	echo $2 > $1
+}
+
+write_with_check "$1" "$2"