sm6125-common: Track vendor
Signed-off-by: Aubrey Nyx <nyxnyx@disroot.org>
This commit is contained in:
Aubrey Nyx
Vendored
+188
@@ -0,0 +1,188 @@
|
||||
# AP DR SENSOR Configuration file
|
||||
#
|
||||
# SENSOR_SERVICE options are one of below
|
||||
# accel,gyro,vehicle_accel,vehicle_gyro,pedometer,vehicle_odometry,accel_temp,
|
||||
# gyro_temp,baro,mag_calib,mag_uncalib,amd,rmd.
|
||||
#
|
||||
# SENSOR_PROVIDER options is one of -- default,native,ssc,samlite.
|
||||
#
|
||||
# SENSOR_RATE = 1~100 (Hz)
|
||||
#
|
||||
# SENSOR_SAMPLES = 1~N
|
||||
#
|
||||
# SENSOR_STATISTIC_ENABLED
|
||||
# bit 0: Diag Print Enabled
|
||||
# bit 1: Adb Print Enabled
|
||||
# SENSOR_STATISTIC_PRINT_COUNT
|
||||
# Skip Number of Print
|
||||
#
|
||||
# QDR_DYNAMIC_LOADING = 1~3
|
||||
# Configure QDR library to be loaded
|
||||
# 1: QDR3
|
||||
# 2: QDR2-GYRO
|
||||
# 3: QDR2-DWT
|
||||
#
|
||||
#
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR3 Configuration #
|
||||
# #
|
||||
# For QDR3, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
SENSOR_SERVICE = accel
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 10
|
||||
SENSOR_SAMPLES = 10
|
||||
#
|
||||
SENSOR_SERVICE = vehicle_speed
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 100
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
SENSOR_SERVICE = gyro
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 10
|
||||
SENSOR_SAMPLES = 10
|
||||
#
|
||||
SENSOR_SERVICE = vehicle_gear
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 100
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
SENSOR_SERVICE = accel_temp
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 1
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
QDR_DYNAMIC_LOADING = 1
|
||||
##Specify CAN sensor type: Valid Options: 14(ODO), 2(ODO_DWT), 3(ODO_DWS)
|
||||
QDR_CAN_TYPE = 14
|
||||
##Reporting offset before PPS boundary
|
||||
QDR_REPORTING_OFFSET = 20
|
||||
#
|
||||
##QDR_ENABLE_QG shall be set as 1
|
||||
QDR_ENABLE_QG = 1
|
||||
#GEAR Optimisation
|
||||
QG_GEAR_ON_CHANGE=1
|
||||
#
|
||||
|
||||
##Vehicle Sensor Configuration (CAN data availability)
|
||||
##QDR_VEH_SENSOR_CONFIG:
|
||||
## 0: VEHICLE_SENSOR_PRESENT - Vehicle Sensor is available (DEFAULT)
|
||||
## 1: VEHICLE_SENSOR_OPTIONAL - Vehicle Sensor may or may not be present.
|
||||
#QDR_VEH_SENSOR_CONFIG = 0
|
||||
|
||||
##Select Wheel set (E.g.: Front two wheels, Rear two wheels OR All four wheels)
|
||||
##To be used for differential wheel tick OR speed service.
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as
|
||||
##ODO_DWS(3) or ODO_DWT(2).
|
||||
##Value "0": Use Front two wheels
|
||||
##Value "1": Use Rear two wheels
|
||||
##Value "2": Use All four wheels
|
||||
#QG_DRIVE_WHEEL_FW_RW_AW = 2
|
||||
##Max Wheel tick value above which wheel tick rolls over
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
|
||||
#QG_DWT_MAX_WHEEL_TICK_COUNT = 255.0
|
||||
##Configure Wheel constant for DWT based below equation
|
||||
##(2 * pi * WHEEL_RADIUS / Pulses Per revolution)
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
|
||||
#QG_DWT_WHEEL_CONSTANT = 0.044
|
||||
#
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR2-DWT Configuration #
|
||||
# #
|
||||
# For QDR2-DWT, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_speed
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_dws
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gear
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#GNSS_POS_STATISTIC_ENABLED = 3
|
||||
#GNSS_POS_STATISTIC_PRNTCNT = 10
|
||||
#GNSS_MSR_STATISTIC_ENABLED = 3
|
||||
#GNSS_MSR_STATISTIC_PRNTCNT = 10
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
#QDR_DYNAMIC_LOADING = 3
|
||||
##Enable/disable sensor data flashback feature
|
||||
#QDR_FLASHBACK_ENABLED = 0
|
||||
##Enable/disable sensor data batching feature
|
||||
#QDR_BATCHING_ENABLED = 0
|
||||
##Reporting offset before PPS boundary
|
||||
#QDR_REPORTING_OFFSET = 20
|
||||
##Sensor dispatch threshold declaration
|
||||
#QDR_SENSDISPATCH_MS = 30
|
||||
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR2-GYRO Configuration #
|
||||
# #
|
||||
# For QDR2-GYRO, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_speed
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gyro
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gear
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
#QDR_DYNAMIC_LOADING = 2
|
||||
##Enable/disable sensor data flashback feature
|
||||
#QDR_FLASHBACK_ENABLED = 0
|
||||
##Enable/disable sensor data batching feature
|
||||
#QDR_BATCHING_ENABLED = 0
|
||||
##Reporting offset before PPS boundary
|
||||
#QDR_REPORTING_OFFSET = 20
|
||||
##Sensor dispatch threshold declaration
|
||||
#QDR_SENSDISPATCH_MS = 30
|
||||
#
|
||||
+551
@@ -0,0 +1,551 @@
|
||||
COG
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDeTCCAmGgAwIBAgIJAKnFNzqHIGkmMA0GCSqGSIb3DQEBBQUAMGkxFzAVBgNV
|
||||
BAoTDlFVQUxDT01NLCBJbmMuMScwJQYDVQQLEx5DcnlwdG9ncmFwaGljIE9wZXJh
|
||||
dGlvbnMgR3JvdXAxJTAjBgNVBAMTHFhUUkEgQWRtbmluaXN0cmF0aXZlIFJvb3Qg
|
||||
djEwHhcNMTEwMzI0MjAwMzQ3WhcNMjYwMzIwMjAwMzQ3WjBpMRcwFQYDVQQKEw5R
|
||||
VUFMQ09NTSwgSW5jLjEnMCUGA1UECxMeQ3J5cHRvZ3JhcGhpYyBPcGVyYXRpb25z
|
||||
IEdyb3VwMSUwIwYDVQQDExxYVFJBIEFkbW5pbmlzdHJhdGl2ZSBSb290IHYxMIIB
|
||||
IDANBgkqhkiG9w0BAQEFAAOCAQ0AMIIBCAKCAQEAp97dbUn5CzvikZSpHOVkevx7
|
||||
NRAE5OPlyU3rbO1xCHextKpgpRCmGEXmpifN33Q4atSsf0QIoPiq9WtbYZsMU8DZ
|
||||
YrLuSFH6P9O9fVyqM0sZZpn97frLD7T+/n7r+PqSdoRJnrTD1kaP1iVJuZSaW+sc
|
||||
x8TIzCJDMf6qWP0zhizqIdFhb4EtgBkRkExUxsQ0xEmBETrbydSEo90be6wLkRgp
|
||||
AtU208ZKCGrGcNKCNSp9TDkwLn0V408HkQ+iNw4xWpNURWGEoN3h8hOz+O3M6L2S
|
||||
RxH21P4CnLj0Ag7FqA35JdUtoeSt8UUJnv9kgBh3X0r9oc20+uwlZTOuZW6SkQIB
|
||||
A6MmMCQwEgYDVR0TAQH/BAgwBgEB/wIBATAOBgNVHQ8BAf8EBAMCAYYwDQYJKoZI
|
||||
hvcNAQEFBQADggEBADkdmsCBpZG44cJafBzcp7zIM57/fme8LuxbF0f50CHH2FHR
|
||||
P+HOLZARqHBFID+D8+hIDu3FQrtZg/SRscO+dvGjdILcp77S0Qne1K9TLu16aMBg
|
||||
wgWmr4mIRG/upqF93qVBzO6ffGR6uHAE7XtP/sRcLG34TmIgTtXEWhDSJHvcjlcf
|
||||
kF7+kMLHUrRcj20MTggKkWkDkCB0jyG9rZB9s127mEZjEMkEeoXi33NvV8qO2ChE
|
||||
yKPPlpKQT7tXghS0WfK73fSNSmWaTmUlL8N9Rb50uA0rZdarNDYI7jqJSlGFgE2+
|
||||
usHoeIDFQK2C6Zha3diWlbs8F3foMXKIfFVhvxo=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
Entrust.net Secure Server Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIE2DCCBEGgAwIBAgIEN0rSQzANBgkqhkiG9w0BAQUFADCBwzELMAkGA1UE
|
||||
BhMCVVMxFDASBgNVBAoTC0VudHJ1c3QubmV0MTswOQYDVQQLEzJ3d3cuZW50
|
||||
cnVzdC5uZXQvQ1BTIGluY29ycC4gYnkgcmVmLiAobGltaXRzIGxpYWIuKTEl
|
||||
MCMGA1UECxMcKGMpIDE5OTkgRW50cnVzdC5uZXQgTGltaXRlZDE6MDgGA1UE
|
||||
AxMxRW50cnVzdC5uZXQgU2VjdXJlIFNlcnZlciBDZXJ0aWZpY2F0aW9uIEF1
|
||||
dGhvcml0eTAeFw05OTA1MjUxNjA5NDBaFw0xOTA1MjUxNjM5NDBaMIHDMQsw
|
||||
CQYDVQQGEwJVUzEUMBIGA1UEChMLRW50cnVzdC5uZXQxOzA5BgNVBAsTMnd3
|
||||
dy5lbnRydXN0Lm5ldC9DUFMgaW5jb3JwLiBieSByZWYuIChsaW1pdHMgbGlh
|
||||
Yi4pMSUwIwYDVQQLExwoYykgMTk5OSBFbnRydXN0Lm5ldCBMaW1pdGVkMTow
|
||||
OAYDVQQDEzFFbnRydXN0Lm5ldCBTZWN1cmUgU2VydmVyIENlcnRpZmljYXRp
|
||||
b24gQXV0aG9yaXR5MIGdMA0GCSqGSIb3DQEBAQUAA4GLADCBhwKBgQDNKIM0
|
||||
VBuJ8w+vN5Ex/68xYMmo6LIQaO2f55M28Qpku0f1BBc/I0dNxScZgSYMVHIN
|
||||
iC3ZH5oSn7yzcdOAGT9HZnuMNSjSuQrfJNqc1lB5gXpa0zf3wkrYKZImZNHk
|
||||
mGw6AIr1NJtl+O3jEP/9uElY3KDegjlrgbEWGWG5VLbmQwIBA6OCAdcwggHT
|
||||
MBEGCWCGSAGG+EIBAQQEAwIABzCCARkGA1UdHwSCARAwggEMMIHeoIHboIHY
|
||||
pIHVMIHSMQswCQYDVQQGEwJVUzEUMBIGA1UEChMLRW50cnVzdC5uZXQxOzA5
|
||||
BgNVBAsTMnd3dy5lbnRydXN0Lm5ldC9DUFMgaW5jb3JwLiBieSByZWYuIChs
|
||||
aW1pdHMgbGlhYi4pMSUwIwYDVQQLExwoYykgMTk5OSBFbnRydXN0Lm5ldCBM
|
||||
aW1pdGVkMTowOAYDVQQDEzFFbnRydXN0Lm5ldCBTZWN1cmUgU2VydmVyIENl
|
||||
cnRpZmljYXRpb24gQXV0aG9yaXR5MQ0wCwYDVQQDEwRDUkwxMCmgJ6AlhiNo
|
||||
dHRwOi8vd3d3LmVudHJ1c3QubmV0L0NSTC9uZXQxLmNybDArBgNVHRAEJDAi
|
||||
gA8xOTk5MDUyNTE2MDk0MFqBDzIwMTkwNTI1MTYwOTQwWjALBgNVHQ8EBAMC
|
||||
AQYwHwYDVR0jBBgwFoAU8BdiE1U9s/8KAGv7UISX8+1i0BowHQYDVR0OBBYE
|
||||
FPAXYhNVPbP/CgBr+1CEl/PtYtAaMAwGA1UdEwQFMAMBAf8wGQYJKoZIhvZ9
|
||||
B0EABAwwChsEVjQuMAMCBJAwDQYJKoZIhvcNAQEFBQADgYEAkNwwAvpkdMKn
|
||||
CqV8IY00F6j7Rw7/JXyNEwr75Ji174z4xRAN95K+8cPV1ZVqBLssziY2Zcgx
|
||||
xufuP+NXdYR6Ee9GTxj005i7qIcyunL2POI9n9cd2cNgQ4xYDiKWL2KjLB+6
|
||||
rQXvqzJ4h6BUcxm1XAX5Uj5tLUUL9wqT6u0G+bI=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
Entrust Certification Authority (2048)
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEKjCCAxKgAwIBAgIEOGPe+DANBgkqhkiG9w0BAQUFADCBtDEUMBIGA1UEChMLRW50cnVzdC5u
|
||||
ZXQxQDA+BgNVBAsUN3d3dy5lbnRydXN0Lm5ldC9DUFNfMjA0OCBpbmNvcnAuIGJ5IHJlZi4gKGxp
|
||||
bWl0cyBsaWFiLikxJTAjBgNVBAsTHChjKSAxOTk5IEVudHJ1c3QubmV0IExpbWl0ZWQxMzAxBgNV
|
||||
BAMTKkVudHJ1c3QubmV0IENlcnRpZmljYXRpb24gQXV0aG9yaXR5ICgyMDQ4KTAeFw05OTEyMjQx
|
||||
NzUwNTFaFw0yOTA3MjQxNDE1MTJaMIG0MRQwEgYDVQQKEwtFbnRydXN0Lm5ldDFAMD4GA1UECxQ3
|
||||
d3d3LmVudHJ1c3QubmV0L0NQU18yMDQ4IGluY29ycC4gYnkgcmVmLiAobGltaXRzIGxpYWIuKTEl
|
||||
MCMGA1UECxMcKGMpIDE5OTkgRW50cnVzdC5uZXQgTGltaXRlZDEzMDEGA1UEAxMqRW50cnVzdC5u
|
||||
ZXQgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgKDIwNDgpMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8A
|
||||
MIIBCgKCAQEArU1LqRKGsuqjIAcVFmQqK0vRvwtKTY7tgHalZ7d4QMBzQshowNtTK91euHaYNZOL
|
||||
Gp18EzoOH1u3Hs/lJBQesYGpjX24zGtLA/ECDNyrpUAkAH90lKGdCCmziAv1h3edVc3kw37XamSr
|
||||
hRSGlVuXMlBvPci6Zgzj/L24ScF2iUkZ/cCovYmjZy/Gn7xxGWC4LeksyZB2ZnuU4q941mVTXTzW
|
||||
nLLPKQP5L6RQstRIzgUyVYr9smRMDuSYB3Xbf9+5CFVghTAp+XtIpGmG4zU/HoZdenoVve8AjhUi
|
||||
VBcAkCaTvA5JaJG/+EfTnZVCwQ5N328mz8MYIWJmQ3DW1cAH4QIDAQABo0IwQDAOBgNVHQ8BAf8E
|
||||
BAMCAQYwDwYDVR0TAQH/BAUwAwEB/zAdBgNVHQ4EFgQUVeSB0RGAvtiJuQijMfmhJAkWuXAwDQYJ
|
||||
KoZIhvcNAQEFBQADggEBADubj1abMOdTmXx6eadNl9cZlZD7Bh/KM3xGY4+WZiT6QBshJ8rmcnPy
|
||||
T/4xmf3IDExoU8aAghOY+rat2l098c5u9hURlIIM7j+VrxGrD9cv3h8Dj1csHsm7mhpElesYT6Yf
|
||||
zX1XEC+bBAlahLVu2B064dae0Wx5XnkcFMXj0EyTO2U87d89vqbllRrDtRnDvV5bu/8j72gZyxKT
|
||||
J1wDLW8w0B62GqzeWvfRqqgnpv55gcR5mTNXuhKwqeBCbJPKVt7+bYQLCIt+jerXmCHG8+c8eS9e
|
||||
nNFMFY3h7CI3zJpDC5fcgJCNs2ebb0gIFVbPv/ErfF6adulZkMV8gzURZVE=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
Entrust Root Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEkTCCA3mgAwIBAgIERWtQVDANBgkqhkiG9w0BAQUFADCBsDELMAkGA1UEBhMC
|
||||
VVMxFjAUBgNVBAoTDUVudHJ1c3QsIEluYy4xOTA3BgNVBAsTMHd3dy5lbnRydXN0
|
||||
Lm5ldC9DUFMgaXMgaW5jb3Jwb3JhdGVkIGJ5IHJlZmVyZW5jZTEfMB0GA1UECxMW
|
||||
KGMpIDIwMDYgRW50cnVzdCwgSW5jLjEtMCsGA1UEAxMkRW50cnVzdCBSb290IENl
|
||||
cnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTA2MTEyNzIwMjM0MloXDTI2MTEyNzIw
|
||||
NTM0MlowgbAxCzAJBgNVBAYTAlVTMRYwFAYDVQQKEw1FbnRydXN0LCBJbmMuMTkw
|
||||
NwYDVQQLEzB3d3cuZW50cnVzdC5uZXQvQ1BTIGlzIGluY29ycG9yYXRlZCBieSBy
|
||||
ZWZlcmVuY2UxHzAdBgNVBAsTFihjKSAyMDA2IEVudHJ1c3QsIEluYy4xLTArBgNV
|
||||
BAMTJEVudHJ1c3QgUm9vdCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCCASIwDQYJ
|
||||
KoZIhvcNAQEBBQADggEPADCCAQoCggEBALaVtkNC+sZtKm9I35RMOVcF7sN5EUFo
|
||||
Nu3s/poBj6E4KPz3EEZmLk0eGrEaTsbRwJWIsMn/MYszA9u3g3s+IIRe7bJWKKf4
|
||||
4LlAcTfFy0cOlypowCKVYhXbR9n10Cv/gkvJrT7eTNuQgFA/CYqEAOwwCj0Yzfv9
|
||||
KlmaI5UXLEWeH25DeW0MXJj+SKfFI0dcXv1u5x609mhF0YaDW6KKjbHjKYD+JXGI
|
||||
rb68j6xSlkuqUY3kEzEZ6E5Nn9uss2rVvDlUccp6en+Q3X0dgNmBu1kmwhH+5pPi
|
||||
94DkZfs0Nw4pgHBNrziGLp5/V6+eF67rHMsoIV+2HNjnogQi+dPa2MsCAwEAAaOB
|
||||
sDCBrTAOBgNVHQ8BAf8EBAMCAQYwDwYDVR0TAQH/BAUwAwEB/zArBgNVHRAEJDAi
|
||||
gA8yMDA2MTEyNzIwMjM0MlqBDzIwMjYxMTI3MjA1MzQyWjAfBgNVHSMEGDAWgBRo
|
||||
kORnpKZTgMeGZqTx90tD+4S9bTAdBgNVHQ4EFgQUaJDkZ6SmU4DHhmak8fdLQ/uE
|
||||
vW0wHQYJKoZIhvZ9B0EABBAwDhsIVjcuMTo0LjADAgSQMA0GCSqGSIb3DQEBBQUA
|
||||
A4IBAQCT1DCw1wMgKtD5Y+iRDAUgqV8ZyntyTtSx29CW+1RaGSwMCPeyvIWonX9t
|
||||
O1KzKtvn1ISMY/YPyyYBkVBs9F8U4pN0wBOeMDpQ47RgxRzwIkSNcUesyBrJ6Zua
|
||||
AGAT/3B+XxFNSRuzFVJ7yVTav52Vr2ua2J7p8eRDjeIRRDq/r72DQnNSi6q7pynP
|
||||
9WQcCk3RvKqsnyrQ/39/2n3qse0wJcGE2jTSW3iDVuycNsMm4hH2Z0kdkquM++v/
|
||||
eu6FSqdQgPCnXEqULl8FmTxSQeDNtGPPAUO6nIPcj2A781q0tHuu2guQOHXvgR1m
|
||||
0vdXcDazv/wor3ElhVsT/h5/WrQ8
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
|
||||
Entrust Root Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEPjCCAyagAwIBAgIESlOMKDANBgkqhkiG9w0BAQsFADCBvjELMAkGA1UEBhMC
|
||||
VVMxFjAUBgNVBAoTDUVudHJ1c3QsIEluYy4xKDAmBgNVBAsTH1NlZSB3d3cuZW50
|
||||
cnVzdC5uZXQvbGVnYWwtdGVybXMxOTA3BgNVBAsTMChjKSAyMDA5IEVudHJ1c3Qs
|
||||
IEluYy4gLSBmb3IgYXV0aG9yaXplZCB1c2Ugb25seTEyMDAGA1UEAxMpRW50cnVz
|
||||
dCBSb290IENlcnRpZmljYXRpb24gQXV0aG9yaXR5IC0gRzIwHhcNMDkwNzA3MTcy
|
||||
NTU0WhcNMzAxMjA3MTc1NTU0WjCBvjELMAkGA1UEBhMCVVMxFjAUBgNVBAoTDUVu
|
||||
dHJ1c3QsIEluYy4xKDAmBgNVBAsTH1NlZSB3d3cuZW50cnVzdC5uZXQvbGVnYWwt
|
||||
dGVybXMxOTA3BgNVBAsTMChjKSAyMDA5IEVudHJ1c3QsIEluYy4gLSBmb3IgYXV0
|
||||
aG9yaXplZCB1c2Ugb25seTEyMDAGA1UEAxMpRW50cnVzdCBSb290IENlcnRpZmlj
|
||||
YXRpb24gQXV0aG9yaXR5IC0gRzIwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEK
|
||||
AoIBAQC6hLZy254Ma+KZ6TABp3bqMriVQRrJ2mFOWHLP/vaCeb9zYQYKpSfYs1/T
|
||||
RU4cctZOMvJyig/3gxnQaoCAAEUesMfnmr8SVycco2gvCoe9amsOXmXzHHfV1IWN
|
||||
cCG0szLni6LVhjkCsbjSR87kyUnEO6fe+1R9V77w6G7CebI6C1XiUJgWMhNcL3hW
|
||||
wcKUs/Ja5CeanyTXxuzQmyWC48zCxEXFjJd6BmsqEZ+pCm5IO2/b1BEZQvePB7/1
|
||||
U1+cPvQXLOZprE4yTGJ36rfo5bs0vBmLrpxR57d+tVOxMyLlbc9wPBr64ptntoP0
|
||||
jaWvYkxN4FisZDQSA/i2jZRjJKRxAgMBAAGjQjBAMA4GA1UdDwEB/wQEAwIBBjAP
|
||||
BgNVHRMBAf8EBTADAQH/MB0GA1UdDgQWBBRqciZ60B7vfec7aVHUbI2fkBJmqzAN
|
||||
BgkqhkiG9w0BAQsFAAOCAQEAeZ8dlsa2eT8ijYfThwMEYGprmi5ZiXMRrEPR9RP/
|
||||
jTkrwPK9T3CMqS/qF8QLVJ7UG5aYMzyorWKiAHarWWluBh1+xLlEjZivEtRh2woZ
|
||||
Rkfz6/djwUAFQKXSt/S1mja/qYh2iARVBCuch38aNzx+LaUa2NSJXsq9rD1s2G2v
|
||||
1fN2D807iDginWyTmsQ9v4IbZT+mD12q/OWyFcq1rca8PdCE6OoGcrBNOTJ4vz4R
|
||||
nAuknZoh8/CbCzB428Hch0P+vGOaysXCHMnHjf87ElgI5rY97HosTvuDls4MPGmH
|
||||
VHOkc8KT/1EQrBVUAdj8BbGJoX90g5pJ19xOe4pIb4tF9g==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
|
||||
DigiCert Assured ID Root CA
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDtzCCAp+gAwIBAgIQDOfg5RfYRv6P5WD8G/AwOTANBgkqhkiG9w0BAQUFADBl
|
||||
MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
|
||||
d3cuZGlnaWNlcnQuY29tMSQwIgYDVQQDExtEaWdpQ2VydCBBc3N1cmVkIElEIFJv
|
||||
b3QgQ0EwHhcNMDYxMTEwMDAwMDAwWhcNMzExMTEwMDAwMDAwWjBlMQswCQYDVQQG
|
||||
EwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3d3cuZGlnaWNl
|
||||
cnQuY29tMSQwIgYDVQQDExtEaWdpQ2VydCBBc3N1cmVkIElEIFJvb3QgQ0EwggEi
|
||||
MA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCtDhXO5EOAXLGH87dg+XESpa7c
|
||||
JpSIqvTO9SA5KFhgDPiA2qkVlTJhPLWxKISKityfCgyDF3qPkKyK53lTXDGEKvYP
|
||||
mDI2dsze3Tyoou9q+yHyUmHfnyDXH+Kx2f4YZNISW1/5WBg1vEfNoTb5a3/UsDg+
|
||||
wRvDjDPZ2C8Y/igPs6eD1sNuRMBhNZYW/lmci3Zt1/GiSw0r/wty2p5g0I6QNcZ4
|
||||
VYcgoc/lbQrISXwxmDNsIumH0DJaoroTghHtORedmTpyoeb6pNnVFzF1roV9Iq4/
|
||||
AUaG9ih5yLHa5FcXxH4cDrC0kqZWs72yl+2qp/C3xag/lRbQ/6GW6whfGHdPAgMB
|
||||
AAGjYzBhMA4GA1UdDwEB/wQEAwIBhjAPBgNVHRMBAf8EBTADAQH/MB0GA1UdDgQW
|
||||
BBRF66Kv9JLLgjEtUYunpyGd823IDzAfBgNVHSMEGDAWgBRF66Kv9JLLgjEtUYun
|
||||
pyGd823IDzANBgkqhkiG9w0BAQUFAAOCAQEAog683+Lt8ONyc3pklL/3cmbYMuRC
|
||||
dWKuh+vy1dneVrOfzM4UKLkNl2BcEkxY5NM9g0lFWJc1aRqoR+pWxnmrEthngYTf
|
||||
fwk8lOa4JiwgvT2zKIn3X/8i4peEH+ll74fg38FnSbNd67IJKusm7Xi+fT8r87cm
|
||||
NW1fiQG2SVufAQWbqz0lwcy2f8Lxb4bG+mRo64EtlOtCt/qMHt1i8b5QZ7dsvfPx
|
||||
H2sMNgcWfzd8qVttevESRmCD1ycEvkvOl77DZypoEd+A5wwzZr8TDRRu838fYxAe
|
||||
+o0bJW1sj6W3YQGx0qMmoRBxna3iw/nDmVG3KwcIzi7mULKn+gpFL6Lw8g==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
DigiCert Global Root CA
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDrzCCApegAwIBAgIQCDvgVpBCRrGhdWrJWZHHSjANBgkqhkiG9w0BAQUFADBh
|
||||
MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
|
||||
d3cuZGlnaWNlcnQuY29tMSAwHgYDVQQDExdEaWdpQ2VydCBHbG9iYWwgUm9vdCBD
|
||||
QTAeFw0wNjExMTAwMDAwMDBaFw0zMTExMTAwMDAwMDBaMGExCzAJBgNVBAYTAlVT
|
||||
MRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMxGTAXBgNVBAsTEHd3dy5kaWdpY2VydC5j
|
||||
b20xIDAeBgNVBAMTF0RpZ2lDZXJ0IEdsb2JhbCBSb290IENBMIIBIjANBgkqhkiG
|
||||
9w0BAQEFAAOCAQ8AMIIBCgKCAQEA4jvhEXLeqKTTo1eqUKKPC3eQyaKl7hLOllsB
|
||||
CSDMAZOnTjC3U/dDxGkAV53ijSLdhwZAAIEJzs4bg7/fzTtxRuLWZscFs3YnFo97
|
||||
nh6Vfe63SKMI2tavegw5BmV/Sl0fvBf4q77uKNd0f3p4mVmFaG5cIzJLv07A6Fpt
|
||||
43C/dxC//AH2hdmoRBBYMql1GNXRor5H4idq9Joz+EkIYIvUX7Q6hL+hqkpMfT7P
|
||||
T19sdl6gSzeRntwi5m3OFBqOasv+zbMUZBfHWymeMr/y7vrTC0LUq7dBMtoM1O/4
|
||||
gdW7jVg/tRvoSSiicNoxBN33shbyTApOB6jtSj1etX+jkMOvJwIDAQABo2MwYTAO
|
||||
BgNVHQ8BAf8EBAMCAYYwDwYDVR0TAQH/BAUwAwEB/zAdBgNVHQ4EFgQUA95QNVbR
|
||||
TLtm8KPiGxvDl7I90VUwHwYDVR0jBBgwFoAUA95QNVbRTLtm8KPiGxvDl7I90VUw
|
||||
DQYJKoZIhvcNAQEFBQADggEBAMucN6pIExIK+t1EnE9SsPTfrgT1eXkIoyQY/Esr
|
||||
hMAtudXH/vTBH1jLuG2cenTnmCmrEbXjcKChzUyImZOMkXDiqw8cvpOp/2PV5Adg
|
||||
06O/nVsJ8dWO41P0jmP6P6fbtGbfYmbW0W5BjfIttep3Sp+dWOIrWcBAI+0tKIJF
|
||||
PnlUkiaY4IBIqDfv8NZ5YBberOgOzW6sRBc4L0na4UU+Krk2U886UAb3LujEV0ls
|
||||
YSEY1QSteDwsOoBrp+uvFRTp2InBuThs4pFsiv9kuXclVzDAGySj4dzp30d8tbQk
|
||||
CAUw7C29C79Fv1C5qfPrmAESrciIxpg0X40KPMbp1ZWVbd4=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
DigiCert High Assurance EV Root CA
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDxTCCAq2gAwIBAgIQAqxcJmoLQJuPC3nyrkYldzANBgkqhkiG9w0BAQUFADBs
|
||||
MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
|
||||
d3cuZGlnaWNlcnQuY29tMSswKQYDVQQDEyJEaWdpQ2VydCBIaWdoIEFzc3VyYW5j
|
||||
ZSBFViBSb290IENBMB4XDTA2MTExMDAwMDAwMFoXDTMxMTExMDAwMDAwMFowbDEL
|
||||
MAkGA1UEBhMCVVMxFTATBgNVBAoTDERpZ2lDZXJ0IEluYzEZMBcGA1UECxMQd3d3
|
||||
LmRpZ2ljZXJ0LmNvbTErMCkGA1UEAxMiRGlnaUNlcnQgSGlnaCBBc3N1cmFuY2Ug
|
||||
RVYgUm9vdCBDQTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMbM5XPm
|
||||
+9S75S0tMqbf5YE/yc0lSbZxKsPVlDRnogocsF9ppkCxxLeyj9CYpKlBWTrT3JTW
|
||||
PNt0OKRKzE0lgvdKpVMSOO7zSW1xkX5jtqumX8OkhPhPYlG++MXs2ziS4wblCJEM
|
||||
xChBVfvLWokVfnHoNb9Ncgk9vjo4UFt3MRuNs8ckRZqnrG0AFFoEt7oT61EKmEFB
|
||||
Ik5lYYeBQVCmeVyJ3hlKV9Uu5l0cUyx+mM0aBhakaHPQNAQTXKFx01p8VdteZOE3
|
||||
hzBWBOURtCmAEvF5OYiiAhF8J2a3iLd48soKqDirCmTCv2ZdlYTBoSUeh10aUAsg
|
||||
EsxBu24LUTi4S8sCAwEAAaNjMGEwDgYDVR0PAQH/BAQDAgGGMA8GA1UdEwEB/wQF
|
||||
MAMBAf8wHQYDVR0OBBYEFLE+w2kD+L9HAdSYJhoIAu9jZCvDMB8GA1UdIwQYMBaA
|
||||
FLE+w2kD+L9HAdSYJhoIAu9jZCvDMA0GCSqGSIb3DQEBBQUAA4IBAQAcGgaX3Nec
|
||||
nzyIZgYIVyHbIUf4KmeqvxgydkAQV8GK83rZEWWONfqe/EW1ntlMMUu4kehDLI6z
|
||||
eM7b41N5cdblIZQB2lWHmiRk9opmzN6cN82oNLFpmyPInngiK3BD41VHMWEZ71jF
|
||||
hS9OMPagMRYjyOfiZRYzy78aG6A9+MpeizGLYAiJLQwGXFK3xPkKmNEVX58Svnw2
|
||||
Yzi9RKR/5CYrCsSXaQ3pjOLAEFe4yHYSkVXySGnYvCoCWw9E1CAx2/S6cCZdkGCe
|
||||
vEsXCS+0yx5DaMkHJ8HSXPfqIbloEpw8nL+e/IBcm2PN7EeqJSdnoDfzAIJ9VNep
|
||||
+OkuE6N36B9K
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 1 Public Primary Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIICPTCCAaYCEQDNun9W8N/kvFT+IqyzcqpVMA0GCSqGSIb3DQEBAgUAMF8xCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xh
|
||||
c3MgMSBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05
|
||||
NjAxMjkwMDAwMDBaFw0yODA4MDEyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYD
|
||||
VQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMSBQdWJsaWMgUHJp
|
||||
bWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOB
|
||||
jQAwgYkCgYEA5Rm/baNWYS2ZSHH2Z965jeu3noaACpEO+jglr0aIguVzqKCbJF0N
|
||||
H8xlbgyw0FaEGIeaBpsQoXPftFg5a27B9hXVqKg/qhIGjTGsf7A01480Z4gJzRQR
|
||||
4k5FVmkfeAKA2txHkSm7NsljXMXg1y2He6G3MrB7MLoqLzGq7qNn2tsCAwEAATAN
|
||||
BgkqhkiG9w0BAQIFAAOBgQBMP7iLxmjf7kMzDl3ppssHhE16M/+SG/Q2rdiVIjZo
|
||||
EWx8QszznC7EBz8UsA9P/5CSdvnivErpj82ggAr3xSnxgiJduLHdgSOjeyUVRjB5
|
||||
FvjqBUuUfx3CHMjjt/QQQDwTw18fU+hI5Ia0e6E1sHslurjTjqs/OJ0ANACY89Fx
|
||||
lA==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 2 Public Primary Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIICPDCCAaUCEC0b/EoXjaOR6+f/9YtFvgswDQYJKoZIhvcNAQECBQAwXzELMAkG
|
||||
A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz
|
||||
cyAyIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2
|
||||
MDEyOTAwMDAwMFoXDTI4MDgwMTIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV
|
||||
BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAyIFB1YmxpYyBQcmlt
|
||||
YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN
|
||||
ADCBiQKBgQC2WoujDWojg4BrzzmH9CETMwZMJaLtVRKXxaeAufqDwSCg+i8VDXyh
|
||||
YGt+eSz6Bg86rvYbb7HS/y8oUl+DfUvEerf4Zh+AVPy3wo5ZShRXRtGak75BkQO7
|
||||
FYCTXOvnzAhsPz6zSvz/S2wj1VCCJkQZjiPDceoZJEcEnnW/yKYAHwIDAQABMA0G
|
||||
CSqGSIb3DQEBAgUAA4GBAIobK/o5wXTXXtgZZKJYSi034DNHD6zt96rbHuSLBlxg
|
||||
J8pFUs4W7z8GZOeUaHxgMxURaa+dYo2jA1Rrpr7l7gUYYAS/QoD90KioHgE796Nc
|
||||
r6Pc5iaAIzy4RHT3Cq5Ji2F4zCS/iIqnDupzGUH9TQPwiNHleI2lKk/2lw0Xd8rY
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIICPDCCAaUCEDyRMcsf9tAbDpq40ES/Er4wDQYJKoZIhvcNAQEFBQAwXzELMAkG
|
||||
A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz
|
||||
cyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2
|
||||
MDEyOTAwMDAwMFoXDTI4MDgwMjIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV
|
||||
BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmlt
|
||||
YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN
|
||||
ADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhE
|
||||
BarsAx94f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/is
|
||||
I19wKTakyYbnsZogy1Olhec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0G
|
||||
CSqGSIb3DQEBBQUAA4GBABByUqkFFBkyCEHwxWsKzH4PIRnN5GfcX6kb5sroc50i
|
||||
2JhucwNhkcV8sEVAbkSdjbCxlnRhLQ2pRdKkkirWmnWXbj9T/UWZYB2oK0z5XqcJ
|
||||
2HUw19JlYD1n1khVdWk/kfVIC0dpImmClr7JyDiGSnoscxlIaU5rfGW/D/xwzoiQ
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 1 Public Primary Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDAjCCAmsCEEzH6qqYPnHTkxD4PTqJkZIwDQYJKoZIhvcNAQEFBQAwgcExCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xh
|
||||
c3MgMSBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcy
|
||||
MTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3Jp
|
||||
emVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMB4X
|
||||
DTk4MDUxODAwMDAwMFoXDTI4MDgwMTIzNTk1OVowgcExCzAJBgNVBAYTAlVTMRcw
|
||||
FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgMSBQdWJsaWMg
|
||||
UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEo
|
||||
YykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5
|
||||
MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMIGfMA0GCSqGSIb3DQEB
|
||||
AQUAA4GNADCBiQKBgQCq0Lq+Fi24g9TK0g+8djHKlNgdk4xWArzZbxpvUjZudVYK
|
||||
VdPfQ4chEWWKfo+9Id5rMj8bhDSVBZ1BNeuS65bdqlk/AVNtmU/t5eIqWpDBucSm
|
||||
Fc/IReumXY6cPvBkJHalzasab7bYe1FhbqZ/h8jit+U03EGI6glAvnOSPWvndQID
|
||||
AQABMA0GCSqGSIb3DQEBBQUAA4GBAKlPww3HZ74sy9mozS11534Vnjty637rXC0J
|
||||
h9ZrbWB85a7FkCMMXErQr7Fd88e2CtvgFZMN3QO8x3aKtd1Pw5sTdbgBwObJW2ul
|
||||
uIncrKTdcu1OofdPvAbT6shkdHvClUGcZXNY8ZCaPGqxmMnEh7zPRW1F4m4iP/68
|
||||
DzFc6PLZ
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 2 Public Primary Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDAzCCAmwCEQC5L2DMiJ+hekYJuFtwbIqvMA0GCSqGSIb3DQEBBQUAMIHBMQsw
|
||||
CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xPDA6BgNVBAsTM0Ns
|
||||
YXNzIDIgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgLSBH
|
||||
MjE6MDgGA1UECxMxKGMpIDE5OTggVmVyaVNpZ24sIEluYy4gLSBGb3IgYXV0aG9y
|
||||
aXplZCB1c2Ugb25seTEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1c3QgTmV0d29yazAe
|
||||
Fw05ODA1MTgwMDAwMDBaFw0yODA4MDEyMzU5NTlaMIHBMQswCQYDVQQGEwJVUzEX
|
||||
MBUGA1UEChMOVmVyaVNpZ24sIEluYy4xPDA6BgNVBAsTM0NsYXNzIDIgUHVibGlj
|
||||
IFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgLSBHMjE6MDgGA1UECxMx
|
||||
KGMpIDE5OTggVmVyaVNpZ24sIEluYy4gLSBGb3IgYXV0aG9yaXplZCB1c2Ugb25s
|
||||
eTEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1c3QgTmV0d29yazCBnzANBgkqhkiG9w0B
|
||||
AQEFAAOBjQAwgYkCgYEAp4gBIXQs5xoD8JjhlzwPIQjxnNuX6Zr8wgQGE75fUsjM
|
||||
HiwSViy4AWkszJkfrbCWrnkE8hM5wXuYuggs6MKEEyyqaekJ9MepAqRCwiNPStjw
|
||||
DqL7MWzJ5m+ZJwf15vRMeJ5t60aG+rmGyVTyssSv1EYcWskVMP8NbPUtDm3Of3cC
|
||||
AwEAATANBgkqhkiG9w0BAQUFAAOBgQByLvl/0fFx+8Se9sVeUYpAmLho+Jscg9ji
|
||||
nb3/7aHmZuovCfTK1+qlK5X2JGCGTUQug6XELaDTrnhpb3LabK4I8GOSN+a7xDAX
|
||||
rXfMSTWqz9iP0b63GJZHc2pUIjRkLbYWm1lbtFFZOrMLFPQS32eg9K0yZF6xRnIn
|
||||
jBJ7xUS0rg==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDAjCCAmsCEH3Z/gfPqB63EHln+6eJNMYwDQYJKoZIhvcNAQEFBQAwgcExCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xh
|
||||
c3MgMyBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcy
|
||||
MTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3Jp
|
||||
emVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMB4X
|
||||
DTk4MDUxODAwMDAwMFoXDTI4MDgwMTIzNTk1OVowgcExCzAJBgNVBAYTAlVTMRcw
|
||||
FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgMyBQdWJsaWMg
|
||||
UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEo
|
||||
YykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5
|
||||
MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMIGfMA0GCSqGSIb3DQEB
|
||||
AQUAA4GNADCBiQKBgQDMXtERXVxp0KvTuWpMmR9ZmDCOFoUgRm1HP9SFIIThbbP4
|
||||
pO0M8RcPO/mn+SXXwc+EY/J8Y8+iR/LGWzOOZEAEaMGAuWQcRXfH2G71lSk8UOg0
|
||||
13gfqLptQ5GVj0VXXn7F+8qkBOvqlzdUMG+7AUcyM83cV5tkaWH4mx0ciU9cZwID
|
||||
AQABMA0GCSqGSIb3DQEBBQUAA4GBAFFNzb5cy5gZnBWyATl4Lk0PZ3BwmcYQWpSk
|
||||
U01UbSuvDV1Ai2TT1+7eVmGSX6bEHRBhNtMsJzzoKQm5EWR0zLVznxxIqbxhAe7i
|
||||
F6YM40AIOw7n60RzKprxaZLvcRTDOaxxp5EJb+RxBrO6WVcmeQD2+A2iMzAo1KpY
|
||||
oJ2daZH9
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 4 Public Primary Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDAjCCAmsCEDKIjprS9esTR/h/xCA3JfgwDQYJKoZIhvcNAQEFBQAwgcExCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xh
|
||||
c3MgNCBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcy
|
||||
MTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3Jp
|
||||
emVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMB4X
|
||||
DTk4MDUxODAwMDAwMFoXDTI4MDgwMTIzNTk1OVowgcExCzAJBgNVBAYTAlVTMRcw
|
||||
FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgNCBQdWJsaWMg
|
||||
UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEo
|
||||
YykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5
|
||||
MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMIGfMA0GCSqGSIb3DQEB
|
||||
AQUAA4GNADCBiQKBgQC68OTP+cSuhVS5B1f5j8V/aBH4xBewRNzjMHPVKmIquNDM
|
||||
HO0oW369atyzkSTKQWI8/AIBvxwWMZQFl3Zuoq29YRdsTjCG8FE3KlDHqGKB3FtK
|
||||
qsGgtG7rL+VXxbErQHDbWk2hjh+9Ax/YA9SPTJlxvOKCzFjomDqG04Y48wApHwID
|
||||
AQABMA0GCSqGSIb3DQEBBQUAA4GBAIWMEsGnuVAVess+rLhDityq3RS6iYF+ATwj
|
||||
cSGIL4LcY/oCRaxFWdcqWERbt5+BO5JoPeI3JPV7bI92NZYJqFmduc4jq3TWg/0y
|
||||
cyfYaT5DdPauxYma51N86Xv2S/PBZYPejYqcPIiNOVn8qj8ijaHBZlCBckztImRP
|
||||
T8qAkbYp
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
|
||||
VeriSign Class 1 Public Primary Certification Authority - G3
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEGjCCAwICEQCLW3VWhFSFCwDPrzhIzrGkMA0GCSqGSIb3DQEBBQUAMIHKMQsw
|
||||
CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZl
|
||||
cmlTaWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWdu
|
||||
LCBJbmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlT
|
||||
aWduIENsYXNzIDEgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
|
||||
dHkgLSBHMzAeFw05OTEwMDEwMDAwMDBaFw0zNjA3MTYyMzU5NTlaMIHKMQswCQYD
|
||||
VQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlT
|
||||
aWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWduLCBJ
|
||||
bmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlTaWdu
|
||||
IENsYXNzIDEgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkg
|
||||
LSBHMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAN2E1Lm0+afY8wR4
|
||||
nN493GwTFtl63SRRZsDHJlkNrAYIwpTRMx/wgzUfbhvI3qpuFU5UJ+/EbRrsC+MO
|
||||
8ESlV8dAWB6jRx9x7GD2bZTIGDnt/kIYVt/kTEkQeE4BdjVjEjbdZrwBBDajVWjV
|
||||
ojYJrKshJlQGrT/KFOCsyq0GHZXi+J3x4GD/wn91K0zM2v6HmSHquv4+VNfSWXjb
|
||||
PG7PoBMAGrgnoeS+Z5bKoMWznN3JdZ7rMJpfo83ZrngZPyPpXNspva1VyBtUjGP2
|
||||
6KbqxzcSXKMpHgLZ2x87tNcPVkeBFQRKr4Mn0cVYiMHd9qqnoxjaaKptEVHhv2Vr
|
||||
n5Z20T0CAwEAATANBgkqhkiG9w0BAQUFAAOCAQEAq2aN17O6x5q25lXQBfGfMY1a
|
||||
qtmqRiYPce2lrVNWYgFHKkTp/j90CxObufRNG7LRX7K20ohcs5/Ny9Sn2WCVhDr4
|
||||
wTcdYcrnsMXlkdpUpqwxga6X3s0IrLjAl4B/bnKk52kTlWUfxJM8/XmPBNQ+T+r3
|
||||
ns7NZ3xPZQL/kYVUc8f/NveGLezQXk//EZ9yBta4GvFMDSZl4kSAHsef493oCtrs
|
||||
pSCAaWihT37ha88HQfqDjrw43bAuEbFrskLMmrz5SCJ5ShkPshw+IHTZasO+8ih4
|
||||
E1Z5T21Q6huwtVexN2ZYI/PcD98Kh8TvhgXVOBRgmaNL3gaWcSzy27YfpO8/7g==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 2 Public Primary Certification Authority - G3
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEGTCCAwECEGFwy0mMX5hFKeewptlQW3owDQYJKoZIhvcNAQEFBQAwgcoxCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjEfMB0GA1UECxMWVmVy
|
||||
aVNpZ24gVHJ1c3QgTmV0d29yazE6MDgGA1UECxMxKGMpIDE5OTkgVmVyaVNpZ24s
|
||||
IEluYy4gLSBGb3IgYXV0aG9yaXplZCB1c2Ugb25seTFFMEMGA1UEAxM8VmVyaVNp
|
||||
Z24gQ2xhc3MgMiBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0
|
||||
eSAtIEczMB4XDTk5MTAwMTAwMDAwMFoXDTM2MDcxNjIzNTk1OVowgcoxCzAJBgNV
|
||||
BAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjEfMB0GA1UECxMWVmVyaVNp
|
||||
Z24gVHJ1c3QgTmV0d29yazE6MDgGA1UECxMxKGMpIDE5OTkgVmVyaVNpZ24sIElu
|
||||
Yy4gLSBGb3IgYXV0aG9yaXplZCB1c2Ugb25seTFFMEMGA1UEAxM8VmVyaVNpZ24g
|
||||
Q2xhc3MgMiBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAt
|
||||
IEczMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEArwoNwtUs22e5LeWU
|
||||
J92lvuCwTY+zYVY81nzD9M0+hsuiiOLh2KRpxbXiv8GmR1BeRjmL1Za6tW8UvxDO
|
||||
JxOeBUebMXoT2B/Z0wI3i60sR/COgQanDTAM6/c8DyAd3HJG7qUCyFvDyVZpTMUY
|
||||
wZF7C9UTAJu878NIPkZgIIUq1ZC2zYugzDLdt/1AVbJQHFauzI13TccgTacxdu9o
|
||||
koqQHgiBVrKtaaNS0MscxCM9H5n+TOgWY47GCI72MfbS+uV23bUckqNJzc0BzWjN
|
||||
qWm6o+sdDZykIKbBoMXRRkwXbdKsZj+WjOCE1Db/IlnF+RFgqF8EffIa9iVCYQ/E
|
||||
Srg+iQIDAQABMA0GCSqGSIb3DQEBBQUAA4IBAQA0JhU8wI1NQ0kdvekhktdmnLfe
|
||||
xbjQ5F1fdiLAJvmEOjr5jLX77GDx6M4EsMjdpwOPMPOY36TmpDHf0xwLRtxyID+u
|
||||
7gU8pDM/CzmscHhzS5kr3zDCVLCoO1Wh/hYozUK9dG6A2ydEp85EXdQbkJgNHkKU
|
||||
sQAsBNB0owIFImNjzYO1+8FtYmtpdf1dcEG59b98377BMnMiIYtYgXsVkXq642RI
|
||||
sH/7NiXaldDxJBQX3RiAa0YjOVT1jmIJBB2UkKab5iXiQkWquJCtvgiPqQtCGJTP
|
||||
cjnhsUPgKM+351psE2tJs//jGHyJizNdrDPXp/naOlXJWBD5qu9ats9LS98q
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority - G3
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEGjCCAwICEQCbfgZJoz5iudXukEhxKe9XMA0GCSqGSIb3DQEBBQUAMIHKMQsw
|
||||
CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZl
|
||||
cmlTaWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWdu
|
||||
LCBJbmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlT
|
||||
aWduIENsYXNzIDMgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
|
||||
dHkgLSBHMzAeFw05OTEwMDEwMDAwMDBaFw0zNjA3MTYyMzU5NTlaMIHKMQswCQYD
|
||||
VQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlT
|
||||
aWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWduLCBJ
|
||||
bmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlTaWdu
|
||||
IENsYXNzIDMgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkg
|
||||
LSBHMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMu6nFL8eB8aHm8b
|
||||
N3O9+MlrlBIwT/A2R/XQkQr1F8ilYcEWQE37imGQ5XYgwREGfassbqb1EUGO+i2t
|
||||
KmFZpGcmTNDovFJbcCAEWNF6yaRpvIMXZK0Fi7zQWM6NjPXr8EJJC52XJ2cybuGu
|
||||
kxUccLwgTS8Y3pKI6GyFVxEa6X7jJhFUokWWVYPKMIno3Nij7SqAP395ZVc+FSBm
|
||||
CC+Vk7+qRy+oRpfwEuL+wgorUeZ25rdGt+INpsyow0xZVYnm6FNcHOqd8GIWC6fJ
|
||||
Xwzw3sJ2zq/3avL6QaaiMxTJ5Xpj055iN9WFZZ4O5lMkdBteHRJTW8cs54NJOxWu
|
||||
imi5V5cCAwEAATANBgkqhkiG9w0BAQUFAAOCAQEAERSWwauSCPc/L8my/uRan2Te
|
||||
2yFPhpk0djZX3dAVL8WtfxUfN2JzPtTnX84XA9s1+ivbrmAJXx5fj267Cz3qWhMe
|
||||
DGBvtcC1IyIuBwvLqXTLR7sdwdela8wv0kL9Sd2nic9TutoAWii/gt/4uhMdUIaC
|
||||
/Y4wjylGsB49Ndo4YhYYSq3mtlFs3q9i6wHQHiT+eo8SGhJouPtmmRQURVyu565p
|
||||
F4ErWjfJXir0xuKhXFSbplQAz/DxwceYMBo7Nhbbo27q/a2ywtrvAkcTisDxszGt
|
||||
TxzhT5yvDwyd93gN2PQ1VoDat20Xj50egWTh/sVFuq1ruQp6Tk9LhO5L8X3dEQ==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 4 Public Primary Certification Authority - G3
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEGjCCAwICEQDsoKeLbnVqAc/EfMwvlF7XMA0GCSqGSIb3DQEBBQUAMIHKMQsw
|
||||
CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZl
|
||||
cmlTaWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWdu
|
||||
LCBJbmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlT
|
||||
aWduIENsYXNzIDQgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
|
||||
dHkgLSBHMzAeFw05OTEwMDEwMDAwMDBaFw0zNjA3MTYyMzU5NTlaMIHKMQswCQYD
|
||||
VQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlT
|
||||
aWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWduLCBJ
|
||||
bmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlTaWdu
|
||||
IENsYXNzIDQgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkg
|
||||
LSBHMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAK3LpRFpxlmr8Y+1
|
||||
GQ9Wzsy1HyDkniYlS+BzZYlZ3tCD5PUPtbut8XzoIfzk6AzufEUiGXaStBO3IFsJ
|
||||
+mGuqPKljYXCKtbeZjbSmwL0qJJgfJxptI8kHtCGUvYynEFYHiK9zUVilQhu0Gbd
|
||||
U6LM8BDcVHOLBKFGMzNcF0C5nk3T875Vg+ixiY5afJqWIpA7iCXy0lOIAgwLePLm
|
||||
NxdLMEYH5IBtptiWLugs+BGzOA1mppvqySNb247i8xOOGlktqgLw7KSHZtzBP/XY
|
||||
ufTsgsbSPZUd5cBPhMnZo0QoBmrXRazwa2rvTl/4EYIeOGM0ZlDUPpNz+jDDZq3/
|
||||
ky2X7wMCAwEAATANBgkqhkiG9w0BAQUFAAOCAQEAj/ola09b5KROJ1WrIhVZPMq1
|
||||
CtRK26vdoV9TxaBXOcLORyu+OshWv8LZJxA6sQU8wHcxuzrTBXttmhwwjIDLk5Mq
|
||||
g6sFUYICABFna/OIYUdfA5PVWw3g8dShMjWFsjrbsIKr0csKvE+MW8VLADsfKoKm
|
||||
fjaF3H48ZwC15DtS4KjrXRX5xm3wrR0OhbepmnMUWluPQSjA1egtTaRezarZ7c7c
|
||||
2NU8Qh0XwRJdRTjDOPP8hS6DRkiy1yBfkjaP53kPmF6Z6PDQpLv1U70qzlmwr25/
|
||||
bLvSHgCwIe34QWKCudiyxLtGUPMxxY8BqHTr9Xgn2uf3ZkPznoM+IKrDNWCRzg==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority - G4
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDhDCCAwqgAwIBAgIQL4D+I4wOIg9IZxIokYesszAKBggqhkjOPQQDAzCByjEL
|
||||
MAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQLExZW
|
||||
ZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNyBWZXJpU2ln
|
||||
biwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxWZXJp
|
||||
U2lnbiBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9y
|
||||
aXR5IC0gRzQwHhcNMDcxMTA1MDAwMDAwWhcNMzgwMTE4MjM1OTU5WjCByjELMAkG
|
||||
A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQLExZWZXJp
|
||||
U2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNyBWZXJpU2lnbiwg
|
||||
SW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxWZXJpU2ln
|
||||
biBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5
|
||||
IC0gRzQwdjAQBgcqhkjOPQIBBgUrgQQAIgNiAASnVnp8Utpkmw4tXNherJI9/gHm
|
||||
GUo9FANL+mAnINmDiWn6VMaaGF5VKmTeBvaNSjutEDxlPZCIBIngMGGzrl0Bp3ve
|
||||
fLK+ymVhAIau2o970ImtTR1ZmkGxvEeA3J5iw/mjgbIwga8wDwYDVR0TAQH/BAUw
|
||||
AwEB/zAOBgNVHQ8BAf8EBAMCAQYwbQYIKwYBBQUHAQwEYTBfoV2gWzBZMFcwVRYJ
|
||||
aW1hZ2UvZ2lmMCEwHzAHBgUrDgMCGgQUj+XTGoasjY5rw8+AatRIGCx7GS4wJRYj
|
||||
aHR0cDovL2xvZ28udmVyaXNpZ24uY29tL3ZzbG9nby5naWYwHQYDVR0OBBYEFLMW
|
||||
kf3upm7ktS5Jj4d4gYDs5bG1MAoGCCqGSM49BAMDA2gAMGUCMGYhDBgmYFo4e1ZC
|
||||
4Kf8NoRRkSAsdk1DPcQdhCPQrNZ8NQbOzWm9kA3bbEhCHQ6qQgIxAJw9SDkjOVga
|
||||
FRJZap7v1VmyHVIsmXHNxynfGyphe3HR3vPA5Q06Sqotp9iGKt0uEA==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority - G5
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIE0zCCA7ugAwIBAgIQGNrRniZ96LtKIVjNzGs7SjANBgkqhkiG9w0BAQUFADCB
|
||||
yjELMAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQL
|
||||
ExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNiBWZXJp
|
||||
U2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxW
|
||||
ZXJpU2lnbiBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0
|
||||
aG9yaXR5IC0gRzUwHhcNMDYxMTA4MDAwMDAwWhcNMzYwNzE2MjM1OTU5WjCByjEL
|
||||
MAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQLExZW
|
||||
ZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNiBWZXJpU2ln
|
||||
biwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxWZXJp
|
||||
U2lnbiBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9y
|
||||
aXR5IC0gRzUwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCvJAgIKXo1
|
||||
nmAMqudLO07cfLw8RRy7K+D+KQL5VwijZIUVJ/XxrcgxiV0i6CqqpkKzj/i5Vbex
|
||||
t0uz/o9+B1fs70PbZmIVYc9gDaTY3vjgw2IIPVQT60nKWVSFJuUrjxuf6/WhkcIz
|
||||
SdhDY2pSS9KP6HBRTdGJaXvHcPaz3BJ023tdS1bTlr8Vd6Gw9KIl8q8ckmcY5fQG
|
||||
BO+QueQA5N06tRn/Arr0PO7gi+s3i+z016zy9vA9r911kTMZHRxAy3QkGSGT2RT+
|
||||
rCpSx4/VBEnkjWNHiDxpg8v+R70rfk/Fla4OndTRQ8Bnc+MUCH7lP59zuDMKz10/
|
||||
NIeWiu5T6CUVAgMBAAGjgbIwga8wDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8E
|
||||
BAMCAQYwbQYIKwYBBQUHAQwEYTBfoV2gWzBZMFcwVRYJaW1hZ2UvZ2lmMCEwHzAH
|
||||
BgUrDgMCGgQUj+XTGoasjY5rw8+AatRIGCx7GS4wJRYjaHR0cDovL2xvZ28udmVy
|
||||
aXNpZ24uY29tL3ZzbG9nby5naWYwHQYDVR0OBBYEFH/TZafC3ey78DAJ80M5+gKv
|
||||
MzEzMA0GCSqGSIb3DQEBBQUAA4IBAQCTJEowX2LP2BqYLz3q3JktvXf2pXkiOOzE
|
||||
p6B4Eq1iDkVwZMXnl2YtmAl+X6/WzChl8gGqCBpH3vn5fJJaCGkgDdk+bW48DW7Y
|
||||
5gaRQBi5+MHt39tBquCWIMnNZBU4gcmU7qKEKQsTb47bDN0lAtukixlE0kF6BWlK
|
||||
WE9gyn6CagsCqiUXObXbf+eEZSqVir2G3l6BFoMtEMze/aiCKm0oHw0LxOXnGiYZ
|
||||
4fQRbxC1lfznQgUy286dUV4otp6F01vvpX1FQHKOtw5rDgb7MzVIcbidJ4vEZV8N
|
||||
hnacRHr2lVz2XTIIM6RUthg/aFzyQkqFOFSDX9HoLPKsEdao7WNq
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Universal Root Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEuTCCA6GgAwIBAgIQQBrEZCGzEyEDDrvkEhrFHTANBgkqhkiG9w0BAQsFADCB
|
||||
vTELMAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQL
|
||||
ExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwOCBWZXJp
|
||||
U2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MTgwNgYDVQQDEy9W
|
||||
ZXJpU2lnbiBVbml2ZXJzYWwgUm9vdCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAe
|
||||
Fw0wODA0MDIwMDAwMDBaFw0zNzEyMDEyMzU5NTlaMIG9MQswCQYDVQQGEwJVUzEX
|
||||
MBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlTaWduIFRydXN0
|
||||
IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAyMDA4IFZlcmlTaWduLCBJbmMuIC0gRm9y
|
||||
IGF1dGhvcml6ZWQgdXNlIG9ubHkxODA2BgNVBAMTL1ZlcmlTaWduIFVuaXZlcnNh
|
||||
bCBSb290IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIIBIjANBgkqhkiG9w0BAQEF
|
||||
AAOCAQ8AMIIBCgKCAQEAx2E3XrEBNNti1xWb/1hajCMj1mCOkdeQmIN65lgZOIzF
|
||||
9uVkhbSicfvtvbnazU0AtMgtc6XHaXGVHzk8skQHnOgO+k1KxCHfKWGPMiJhgsWH
|
||||
H26MfF8WIFFE0XBPV+rjHOPMee5Y2A7Cs0WTwCznmhcrewA3ekEzeOEz4vMQGn+H
|
||||
LL729fdC4uW/h2KJXwBL38Xd5HVEMkE6HnFuacsLdUYI0crSK5XQz/u5QGtkjFdN
|
||||
/BMReYTtXlT2NJ8IAfMQJQYXStrxHXpma5hgZqTZ79IugvHw7wnqRMkVauIDbjPT
|
||||
rJ9VAMf2CGqUuV/c4DPxhGD5WycRtPwW8rtWaoAljQIDAQABo4GyMIGvMA8GA1Ud
|
||||
EwEB/wQFMAMBAf8wDgYDVR0PAQH/BAQDAgEGMG0GCCsGAQUFBwEMBGEwX6FdoFsw
|
||||
WTBXMFUWCWltYWdlL2dpZjAhMB8wBwYFKw4DAhoEFI/l0xqGrI2Oa8PPgGrUSBgs
|
||||
exkuMCUWI2h0dHA6Ly9sb2dvLnZlcmlzaWduLmNvbS92c2xvZ28uZ2lmMB0GA1Ud
|
||||
DgQWBBS2d/ppSEefUxLVwuoHMnYH0ZcHGTANBgkqhkiG9w0BAQsFAAOCAQEASvj4
|
||||
sAPmLGd75JR3Y8xuTPl9Dg3cyLk1uXBPY/ok+myDjEedO2Pzmvl2MpWRsXe8rJq+
|
||||
seQxIcaBlVZaDrHC1LGmWazxY8u4TB1ZkErvkBYoH1quEPuBUDgMbMzxPcP1Y+Oz
|
||||
4yHJJDnp/RVmRvQbEdBNc6N9Rvk97ahfYtTxP/jgdFcrGJ2BtMQo2pSXpXDrrB2+
|
||||
BxHw1dvd5Yzw1TKwg+ZX4o+/vqGqvz0dtdQ46tewXDpPaj+PwGZsY6rp2aQW9IHR
|
||||
lRQOfc2VNNnSj3BzgXucfr2YYdhFh5iQxeuGMMY1v/D/w1WIg0vvBZIGcfK4mJO3
|
||||
7M2CYfE45k+XmCpajQ==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
+14
@@ -0,0 +1,14 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
|
||||
#
|
||||
|
||||
# Android fstab file.
|
||||
# The filesystem that contains the filesystem checker binary (typically /system) cannot
|
||||
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
|
||||
|
||||
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
|
||||
/dev/block/bootdevice/by-name/persist /mnt/vendor/persist ext4 noatime,nosuid,nodev,barrier=1 wait
|
||||
+239
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
Vendored
+17
@@ -0,0 +1,17 @@
|
||||
#configuration parameters for Smart Link Management.
|
||||
|
||||
#Number of previous latency iterations to track to decide the better SLS interface
|
||||
latency_count:3
|
||||
#Threshold in ms to decide the better interface for SLS.
|
||||
latency_threshold:10
|
||||
#Number of tcp connections to be established in each latency session
|
||||
max_tcp_connects:3
|
||||
#Max waiting time for a dns query to be resolved
|
||||
dns_timeout:9
|
||||
#Minimum change in slm ratio to update the new SLA ratio
|
||||
sla_update_threshold:0.25
|
||||
#Timer in msec to track the sls updates. Only one update will be allowed
|
||||
#in this duration
|
||||
sla_update_count_timer:10000
|
||||
#default URL for establishing a tcp sessions
|
||||
slm_http_url:www.qualcomm.com
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1.0</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1.0</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1.0</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1.0</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1.0</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1.0</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-72</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2016-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-72</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-78,-78</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-78,-78</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
+1262
File diff suppressed because it is too large
Load Diff
+3225
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,18 @@
|
||||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!--
|
||||
~ Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
~ All Rights Reserved.
|
||||
~ Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
-->
|
||||
|
||||
<!--
|
||||
This XML file declares which signature|privileged permissions should be
|
||||
granted to privileged applications on QTI devices.
|
||||
It allows additional grants on top of privapp-permissions-platform.xml
|
||||
-->
|
||||
|
||||
<exceptions>
|
||||
<exception package="com.qualcomm.qti.cne">
|
||||
<permission name="android.permission.READ_PHONE_STATE" fixed="false"/>
|
||||
</exception>
|
||||
</exceptions>
|
||||
Vendored
+60
@@ -0,0 +1,60 @@
|
||||
###################################
|
||||
##### FLP settings #####
|
||||
###################################
|
||||
|
||||
###################################
|
||||
# FLP BATCH SIZE
|
||||
###################################
|
||||
# The number of batched locations
|
||||
# requested to modem. The desired number
|
||||
# defined below may not be satisfied, as
|
||||
# the modem can only return the number
|
||||
# of batched locations that can be allocated,
|
||||
# which is limited by memory. The default
|
||||
# batch size defined as 20 as below.
|
||||
BATCH_SIZE=20
|
||||
|
||||
###################################
|
||||
# FLP OUTDOOR TRIP BATCH SIZE
|
||||
###################################
|
||||
# The number of batched locations
|
||||
# requested to modem for outdoor
|
||||
# trip batching. The desired number
|
||||
# defined below may not be satisfied, as
|
||||
# the modem can only return the number
|
||||
# of batched locations that can be allocated,
|
||||
# which is limited by memory. The default
|
||||
# trip batch size defined as 600 as below.
|
||||
OUTDOOR_TRIP_BATCH_SIZE=600
|
||||
|
||||
###################################
|
||||
# FLP BATCHING SESSION TIMEOUT
|
||||
###################################
|
||||
# Duration with which batch session timeout
|
||||
# happens in milliseconds. If not specified
|
||||
# or set to zero, batching session timeout
|
||||
# defaults to 20 seconds by the modem.
|
||||
# BATCH_SESSION_TIMEOUT=20000
|
||||
|
||||
###################################
|
||||
# FLP BATCHING ACCURACY
|
||||
###################################
|
||||
# Set to one of the defined values below
|
||||
# to define the accuracy of batching.
|
||||
# If not specified, accuracy defaults
|
||||
# to LOW.
|
||||
# FLP BATCHING ACCURACY values:
|
||||
# Low accuracy = 0
|
||||
# Medium accuracy = 1
|
||||
# High accuracy = 2
|
||||
ACCURACY=1
|
||||
|
||||
####################################
|
||||
# By default if network fixes are not sensor assisted
|
||||
# these fixes must be dropped. This parameter adds an exception
|
||||
# for targets where there is no PDR and we still want to
|
||||
# report out network fixes
|
||||
# 0: MUST NOT ALLOW NETWORK FIXES
|
||||
# 1: ALLOW NETWORK FIXES
|
||||
####################################
|
||||
ALLOW_NETWORK_FIXES = 0
|
||||
+61
@@ -0,0 +1,61 @@
|
||||
<!--
|
||||
Copyright (c) 2017 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
-->
|
||||
|
||||
<!--
|
||||
|
||||
This file is configured by OEM to customize the path used by GP FS listener
|
||||
service to save files, and will be located in /vendor/etc on device
|
||||
|
||||
"gp_data_path" and "gp_persist_path" are the /data and /persist partition
|
||||
path to save files, respectively.
|
||||
By default, "gp_data_path" is "/data/vendor/tzstorage/", and
|
||||
"gp_persist_path" is "/mnt/vendor/persist/data/".
|
||||
|
||||
To replace with different paths, please also create folder in init.qcom.rc
|
||||
file and update SEAndroid policy.
|
||||
|
||||
Take "/data/vendor/tzstorage/" as an example below,
|
||||
|
||||
A) rootdir/etc/init.qcom.rc:
|
||||
# Create /data/vendor/tzstorage directory for SFS listener
|
||||
mkdir /data/vendor/tzstorage 0770 system system
|
||||
|
||||
B) common/file.te:
|
||||
# SFS listener data file
|
||||
type data_tzstorage_file, file_type, data_file_type;
|
||||
|
||||
C) common/file_contexts:
|
||||
/data/vendor/tzstorage(/.*)? u:object_r:data_tzstorage_file:s0
|
||||
|
||||
D) common/qseecomd.te:
|
||||
# Allow SFS to write to data partition
|
||||
allow tee data_tzstorage_file:dir create_dir_perms;
|
||||
allow tee data_tzstorage_file:file create_file_perms;
|
||||
|
||||
"gp_whitelist_count" and "gp_whitelist_path"
|
||||
|
||||
Some paths needs "/data/vendor/tzstorage" appended to it at the beginning
|
||||
as they do not have access/permissions on their own.
|
||||
Use gp_whitelist_count and gp_whitelist_paths entries to add more such paths.
|
||||
By default, we add "/data/system/users" and "/data/misc/qsee" for current use
|
||||
cases.
|
||||
|
||||
To add an extra path, increment the count in gp_whitelist_count and add a new
|
||||
gp_whitelist_path entry. It is very critical that the count matches with the
|
||||
number of path entries.
|
||||
|
||||
-->
|
||||
|
||||
|
||||
<sfs_path>
|
||||
<gp_data_path> /data/vendor/tzstorage/ </gp_data_path>
|
||||
<gp_persist_path> /mnt/vendor/persist/data/ </gp_persist_path>
|
||||
<gp_whitelist_count> 4 </gp_whitelist_count>
|
||||
<gp_whitelist_path> /data/system/users/ </gp_whitelist_path>
|
||||
<gp_whitelist_path> /data/misc/qsee/ </gp_whitelist_path>
|
||||
<gp_whitelist_path> /qwes </gp_whitelist_path>
|
||||
<gp_whitelist_path> /qwes/licenses </gp_whitelist_path>
|
||||
</sfs_path>
|
||||
Vendored
+382
@@ -0,0 +1,382 @@
|
||||
# Error Estimate
|
||||
# _SET = 1
|
||||
# _CLEAR = 0
|
||||
ERR_ESTIMATE=0
|
||||
|
||||
#NTP server
|
||||
NTP_SERVER=time.xtracloud.net
|
||||
|
||||
#XTRA CA path
|
||||
XTRA_CA_PATH=/usr/lib/ssl-1.1/certs
|
||||
|
||||
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
||||
# 4 - Debug, 5 - Verbose
|
||||
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
||||
DEBUG_LEVEL = 3
|
||||
|
||||
# Intermediate position report, 1=enable, 0=disable
|
||||
INTERMEDIATE_POS=0
|
||||
|
||||
# supl version 1.0
|
||||
SUPL_VER=0x10000
|
||||
|
||||
# Emergency SUPL, 1=enable, 0=disable
|
||||
#SUPL_ES=1
|
||||
|
||||
#Choose PDN for Emergency SUPL
|
||||
#1 - Use emergency PDN
|
||||
#0 - Use regular SUPL PDN for Emergency SUPL
|
||||
#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
|
||||
|
||||
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
|
||||
#If it is uncommented here, this value will overwrite the value from
|
||||
#config.xml.
|
||||
#MSA=0X2
|
||||
#MSB=0X1
|
||||
#SUPL_MODE=
|
||||
|
||||
# GPS Capabilities bit mask
|
||||
# SCHEDULING = 0x01
|
||||
# MSB = 0x02
|
||||
# MSA = 0x04
|
||||
# ON_DEMAND_TIME = 0x10
|
||||
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING
|
||||
CAPABILITIES=0x17
|
||||
|
||||
# Accuracy threshold for intermediate positions
|
||||
# less accurate positions are ignored, 0 for passing all positions
|
||||
# ACCURACY_THRES=5000
|
||||
|
||||
################################
|
||||
##### AGPS server settings #####
|
||||
################################
|
||||
|
||||
# FOR SUPL SUPPORT, set the following
|
||||
# SUPL_HOST=supl.host.com or IP
|
||||
# SUPL_PORT=1234
|
||||
|
||||
# FOR MO SUPL SUPPORT, set the following
|
||||
# MO_SUPL_HOST=supl.host.com or IP
|
||||
# MO_SUPL_PORT=1234
|
||||
|
||||
# FOR C2K PDE SUPPORT, set the following
|
||||
# C2K_HOST=c2k.pde.com or IP
|
||||
# C2K_PORT=1234
|
||||
|
||||
# Bitmask of slots that are available
|
||||
# for write/install to, where 1s indicate writable,
|
||||
# and the default value is 0 where no slots
|
||||
# are writable. For example, AGPS_CERT_WRITABLE_MASK
|
||||
# of b1000001010 makes 3 slots available
|
||||
# and the remaining 7 slots unwritable.
|
||||
#AGPS_CERT_WRITABLE_MASK=0
|
||||
|
||||
####################################
|
||||
# LTE Positioning Profile Settings
|
||||
####################################
|
||||
# LPP_PROFILE is a bit mask
|
||||
# 0: Enable RRLP on LTE(Default)
|
||||
# 0x1: LPP User Plane
|
||||
# 0x2: LPP Control Plane
|
||||
# 0x4: LPP User Plane for NR5G
|
||||
# 0x8: LPP Control Plane for NR5G
|
||||
LPP_PROFILE = 2
|
||||
|
||||
####################################
|
||||
#Datum Type
|
||||
####################################
|
||||
# 0: WGS-84
|
||||
# 1: PZ-90
|
||||
DATUM_TYPE = 0
|
||||
|
||||
################################
|
||||
# EXTRA SETTINGS
|
||||
################################
|
||||
# NMEA provider (1=Modem Processor, 0=Application Processor)
|
||||
NMEA_PROVIDER=0
|
||||
|
||||
# Customized NMEA GGA fix quality that can be used to tell
|
||||
# whether SENSOR contributed to the fix.
|
||||
#
|
||||
# When this configuration item is not enabled (set to any value that is not 1),
|
||||
# GGA fix quality conforms to NMEA standard spec as below:
|
||||
# PPP/DGNSS/SBAS correction fix w/ or w/o sensor: 2
|
||||
# RTK fixed fix w/ or w/o sensor: 4
|
||||
# RTK float fix w/ or w/o sensor: 5
|
||||
# SPE fix w/ or w/o sensor: 1
|
||||
# Sensor dead reckoning fix: 6
|
||||
#
|
||||
# When this configuration is enabled (set to 1), GGA fix quality
|
||||
# will be output as below:
|
||||
# PPP fix w/o sensor: 59, w/ sensor: 69
|
||||
# DGNSS/SBAS correction fix w/o sensor: 2, w/ sensor: 62
|
||||
# RTK fixed fix w/o sensor: 4, w/ sensor: 64
|
||||
# RTK float fix w/o sensor: 5, w/ sensor: 65,
|
||||
# SPE fix w/o sensor: 1, and w/ sensor: 61
|
||||
# Sensor dead reckoning fix: 6
|
||||
#
|
||||
# any value that is not 1 - disabled
|
||||
# 1 - enabled
|
||||
CUSTOM_NMEA_GGA_FIX_QUALITY_ENABLED = 0
|
||||
|
||||
################################
|
||||
# NMEA Reporting Rate Config, valid only when NMEA_PROVIDER is set to "0"
|
||||
################################
|
||||
# NMEA Reporting Rate
|
||||
# Set it to "1HZ" for 1Hz NMEA Reporting
|
||||
# Set it to "NHZ" for NHz NMEA Reporting
|
||||
#Default : NHZ (overridden by position update rate if set to lower rates)
|
||||
NMEA_REPORT_RATE=NHZ
|
||||
|
||||
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
|
||||
SGLTE_TARGET=0
|
||||
|
||||
##################################################
|
||||
# Select Positioning Protocol on A-GLONASS system
|
||||
##################################################
|
||||
# 0x1: RRC CPlane
|
||||
# 0x2: RRLP UPlane
|
||||
# 0x4: LLP Uplane
|
||||
A_GLONASS_POS_PROTOCOL_SELECT = 0
|
||||
|
||||
##################################################
|
||||
# Select technology for LPPe Control Plane
|
||||
##################################################
|
||||
# 0x1: DBH for LPPe CP
|
||||
# 0x2: WLAN AP Measurements for LPPe CP
|
||||
# 0x4: SRN AP measurement for CP
|
||||
# 0x8: Sensor Barometer Measurement LPPe CP
|
||||
#LPPE_CP_TECHNOLOGY = 0
|
||||
|
||||
##################################################
|
||||
# Select technology for LPPe User Plane
|
||||
##################################################
|
||||
# 0x1: DBH for LPPe UP
|
||||
# 0x2: WLAN AP Measurements for LPPe UP
|
||||
# 0x4: SRN AP measurement for UP
|
||||
# 0x8: Sensor Barometer Measurement LPPe UP
|
||||
#LPPE_UP_TECHNOLOGY = 0
|
||||
|
||||
##################################################
|
||||
# AGPS_CONFIG_INJECT
|
||||
##################################################
|
||||
# enable/disable injection of AGPS configurations:
|
||||
# SUPL_VER
|
||||
# SUPL_HOST
|
||||
# SUPL_PORT
|
||||
# MO_SUPL_HOST
|
||||
# MO_SUPL_PORT
|
||||
# C2K_HOST
|
||||
# C2K_PORT
|
||||
# LPP_PROFILE
|
||||
# A_GLONASS_POS_PROTOCOL_SELECT
|
||||
# 0: disable
|
||||
# 1: enable
|
||||
AGPS_CONFIG_INJECT = 1
|
||||
|
||||
##################################################
|
||||
# GNSS settings for automotive use cases
|
||||
# Configurations in following section are
|
||||
# specific to automotive use cases, others
|
||||
# please do not change, keep the default values
|
||||
##################################################
|
||||
|
||||
# AP Coarse Timestamp Uncertainty
|
||||
##################################################
|
||||
# default : 10
|
||||
# AP time stamp uncertainty, until GNSS receiver
|
||||
# is able to acquire better timing information
|
||||
AP_TIMESTAMP_UNCERTAINTY = 10
|
||||
|
||||
#####################################
|
||||
# DR_SYNC Pulse Availability
|
||||
#####################################
|
||||
# 0 : DR_SYNC pulse not available (default)
|
||||
# 1 : DR_SYNC pulse available
|
||||
# This configuration enables the driver to make use
|
||||
# of PPS events generated by DR_SYNC pulse
|
||||
# Standard Linux PPS driver needs to be enabled
|
||||
DR_SYNC_ENABLED = 0
|
||||
|
||||
#####################################
|
||||
# PPS Device name
|
||||
#####################################
|
||||
PPS_DEVICENAME = /dev/pps0
|
||||
|
||||
#####################################
|
||||
# Ignore PPS at Startup and after long outage
|
||||
#####################################
|
||||
IGNORE_PPS_PULSE_COUNT = 1
|
||||
|
||||
#####################################
|
||||
# Long GNSS RF outage in seconds
|
||||
#####################################
|
||||
GNSS_OUTAGE_DURATION = 10
|
||||
|
||||
#####################################
|
||||
# AP Clock Accuracy
|
||||
#####################################
|
||||
# Quality of APPS processor clock (in PPM).
|
||||
# Value specified is used for calculation of
|
||||
# APPS time stamp uncertainty
|
||||
AP_CLOCK_PPM = 100
|
||||
|
||||
#####################################
|
||||
# MAX ms difference to detect missing pulse
|
||||
#####################################
|
||||
# Specifies time threshold in ms to validate any missing PPS pulses
|
||||
MISSING_PULSE_TIME_DELTA = 900
|
||||
|
||||
#####################################
|
||||
# Propagation time uncertainty
|
||||
#####################################
|
||||
# This settings enables time uncertainty propagation
|
||||
# logic incase of missing PPS pulse
|
||||
PROPAGATION_TIME_UNCERTAINTY = 1
|
||||
|
||||
#######################################
|
||||
# APN / IP Type Configuration
|
||||
# APN and IP Type to use for setting
|
||||
# up WWAN call.
|
||||
# Use below values for IP Type:
|
||||
# v4 = 4
|
||||
# v6 = 6
|
||||
# v4v6 = 10
|
||||
#######################################
|
||||
# INTERNET_APN = abc.xyz
|
||||
# INTERNET_IP_TYPE = 4
|
||||
# SUPL_APN = abc.xyz
|
||||
# SUPL_IP_TYPE = 4
|
||||
|
||||
#####################################
|
||||
# Modem type
|
||||
#####################################
|
||||
# This setting configures modem type
|
||||
# (external=0 or internal=1)
|
||||
# comment out the next line to vote
|
||||
# for the first modem in the list
|
||||
MODEM_TYPE = 1
|
||||
|
||||
##################################################
|
||||
# CONSTRAINED TIME UNCERTAINTY MODE
|
||||
##################################################
|
||||
# 0 : disabled (default)
|
||||
# 1 : enabled
|
||||
# This setting enables GPS engine to keep its time
|
||||
# uncertainty below the specified constraint
|
||||
#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0
|
||||
|
||||
# If constrained time uncertainty mode is enabled,
|
||||
# this setting specifies the time uncertainty
|
||||
# threshold that gps engine need to maintain.
|
||||
# In unit of milli-seconds.
|
||||
# Default is 0.0 meaning that modem default value
|
||||
# of time uncertainty threshold will be used.
|
||||
#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0
|
||||
|
||||
# If constrained time uncertainty mode is enabled,
|
||||
# this setting specifies the power budget that
|
||||
# gps engine is allowed to spend to maintain the time
|
||||
# uncertainty.
|
||||
# Default is 0 meaning that GPS engine is not constained
|
||||
# by power budget and can spend as much power as needed.
|
||||
# In unit of 0.1 milli watt second.
|
||||
#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0
|
||||
|
||||
##################################################
|
||||
# POSITION ASSISTED CLOCK ESTIMATOR
|
||||
##################################################
|
||||
# 0 : disabled (default)
|
||||
# 1 : enabled
|
||||
# This setting enables GPS engine to estimate clock
|
||||
# bias and drift when the signal from at least 1
|
||||
# SV is available and the UE’s position is known by
|
||||
# other position engines.
|
||||
#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0
|
||||
|
||||
#####################################
|
||||
# proxyAppPackageName
|
||||
#####################################
|
||||
# This is a string that is sent to the framework
|
||||
# in nfwNotifyCb callback
|
||||
PROXY_APP_PACKAGE_NAME = com.google.android.carrierlocation
|
||||
|
||||
#####################################
|
||||
# CP_MTLR_ES
|
||||
#####################################
|
||||
# CP MTLR ES, 1=enable, 0=disable
|
||||
CP_MTLR_ES=0
|
||||
|
||||
##################################################
|
||||
# GNSS_DEPLOYMENT
|
||||
##################################################
|
||||
# 0 : Enable QTI GNSS (default)
|
||||
# 1 : Enable QCSR SS5
|
||||
# 2 : Enable PDS API
|
||||
# This setting use to select between QTI GNSS,
|
||||
# QCSR SS5 hardware receiver, and PDS API.
|
||||
# By default QTI GNSS receiver is enabled.
|
||||
# GNSS_DEPLOYMENT = 0
|
||||
|
||||
##################################################
|
||||
## LOG BUFFER CONFIGURATION
|
||||
##################################################
|
||||
#LOG_BUFFER_ENABLED, 1=enable, 0=disable
|
||||
#*_LEVEL_TIME_DEPTH, maximum time depth of level *
|
||||
#in log buffer, unit is second
|
||||
#*_LEVEL_MAX_CAPACITY, maximum numbers of level *
|
||||
#log print sentences in log buffer
|
||||
LOG_BUFFER_ENABLED = 0
|
||||
E_LEVEL_TIME_DEPTH = 600
|
||||
E_LEVEL_MAX_CAPACITY = 50
|
||||
W_LEVEL_TIME_DEPTH = 500
|
||||
W_LEVEL_MAX_CAPACITY = 100
|
||||
I_LEVEL_TIME_DEPTH = 400
|
||||
I_LEVEL_MAX_CAPACITY = 200
|
||||
D_LEVEL_TIME_DEPTH = 30
|
||||
D_LEVEL_MAX_CAPACITY = 300
|
||||
V_LEVEL_TIME_DEPTH = 200
|
||||
V_LEVEL_MAX_CAPACITY = 400
|
||||
|
||||
##################################################
|
||||
# Allow buffer diag log packets when diag memory allocation
|
||||
# fails during boot up time.
|
||||
##################################################
|
||||
BUFFER_DIAG_LOGGING = 1
|
||||
|
||||
#######################################
|
||||
# NTRIP CLIENT LIBRARY NAME
|
||||
#######################################
|
||||
# NTRIP_CLIENT_LIB_NAME =
|
||||
|
||||
##################################################
|
||||
# Correction Data Framework settings
|
||||
# Default values:
|
||||
# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
|
||||
# CDFW_INJECT_DATA_INTERVAL = 600000 //10 mins
|
||||
# CDFW_RTCM_MESSAGE_INTERVAL = 1000 //1 second
|
||||
#
|
||||
# If multiple sources coexist on a PL,
|
||||
# the prorioty sequence can be set by the integer number.
|
||||
# PRIORITY_1 is higher than PRIORITY_2, for example,
|
||||
# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
|
||||
# CDFW_SOURCE_PRIORITY_2 = CV2X RTCM
|
||||
##################################################
|
||||
|
||||
##################################################
|
||||
# RF LOSS
|
||||
# The loss in 0.1 dbHz from the C/N0 at the antenna port
|
||||
# These values must be configured by OEM if not
|
||||
# supported in QMI LOC message
|
||||
# There is one entry for each signal type
|
||||
##################################################
|
||||
RF_LOSS_GPS = 0
|
||||
RF_LOSS_GPS_L5 = 0
|
||||
RF_LOSS_GLO_LEFT = 0
|
||||
RF_LOSS_GLO_CENTER = 0
|
||||
RF_LOSS_GLO_RIGHT = 0
|
||||
RF_LOSS_BDS = 0
|
||||
RF_LOSS_BDS_B2A = 0
|
||||
RF_LOSS_GAL = 0
|
||||
RF_LOSS_GAL_E5 = 0
|
||||
RF_LOSS_NAVIC = 0
|
||||
@@ -0,0 +1,5 @@
|
||||
service vendor.bluetooth-1-0-qti /vendor/bin/hw/android.hardware.bluetooth@1.0-service-qti
|
||||
class hal
|
||||
user bluetooth
|
||||
group bluetooth system wakelock oem_2901
|
||||
capabilities BLOCK_SUSPEND NET_ADMIN
|
||||
@@ -0,0 +1,27 @@
|
||||
on property:init.svc.mediadrm=running
|
||||
mkdir /data/vendor/mediadrm 0770 media mediadrm
|
||||
start vendor.move_data_sh
|
||||
|
||||
service vendor.move_data_sh /system/bin/move_widevine_data.sh
|
||||
class late_start
|
||||
user media
|
||||
group media mediadrm system
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.drm-widevine-hal-1-3 /vendor/bin/hw/android.hardware.drm@1.3-service.widevine
|
||||
interface android.hardware.drm@1.0::ICryptoFactory widevine
|
||||
interface android.hardware.drm@1.0::IDrmFactory widevine
|
||||
interface android.hardware.drm@1.1::ICryptoFactory widevine
|
||||
interface android.hardware.drm@1.1::IDrmFactory widevine
|
||||
interface android.hardware.drm@1.2::ICryptoFactory widevine
|
||||
interface android.hardware.drm@1.2::IDrmFactory widevine
|
||||
interface android.hardware.drm@1.3::ICryptoFactory widevine
|
||||
interface android.hardware.drm@1.3::IDrmFactory widevine
|
||||
interface android.hidl.base@1.0::IBase widevine
|
||||
class hal
|
||||
user media
|
||||
group media mediadrm drmrpc system
|
||||
ioprio rt 4
|
||||
writepid /dev/cpuset/foreground/tasks
|
||||
capabilities SYS_NICE
|
||||
@@ -0,0 +1,8 @@
|
||||
on property:vendor.keymaster.strongbox.version=*
|
||||
enable gatekeeper-1-0
|
||||
start gatekeeper-1-0
|
||||
|
||||
service gatekeeper-1-0 /vendor/bin/hw/android.hardware.gatekeeper@1.0-service-qti
|
||||
class early_hal
|
||||
user system
|
||||
group system
|
||||
@@ -0,0 +1,4 @@
|
||||
service gnss_service /vendor/bin/hw/android.hardware.gnss@2.1-service-qti
|
||||
class hal
|
||||
user gps
|
||||
group system gps radio vendor_qti_diag
|
||||
@@ -0,0 +1,7 @@
|
||||
on init
|
||||
start keymaster-4-0
|
||||
|
||||
service keymaster-4-0 /vendor/bin/hw/android.hardware.keymaster@4.0-service-qti
|
||||
class early_hal
|
||||
user system
|
||||
group system drmrpc
|
||||
+14
@@ -0,0 +1,14 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
service neuralnetworks_hal_service /vendor/bin/hw/android.hardware.neuralnetworks@1.3-service-qti
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
writepid /dev/stune/nnapi-hal/tasks
|
||||
|
||||
#Below changes moved from init.target.rc as part of go/FR53051
|
||||
on post-fs-data
|
||||
mkdir /data/vendor/nnhal 0700 system system
|
||||
Vendored
+4
@@ -0,0 +1,4 @@
|
||||
service vendor.cnd /system/vendor/bin/cnd
|
||||
class main
|
||||
user system
|
||||
group system wifi inet radio wakelock net_admin
|
||||
+13
@@ -0,0 +1,13 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
# Create the directories used by DPM subsystem
|
||||
|
||||
#start dataadpl service
|
||||
service vendor.dataadpl /system/vendor/bin/adpl
|
||||
class main
|
||||
user radio
|
||||
socket adpl_cmd_uds_file dgram 660 radio radio
|
||||
group radio oem_2901 diag usb inet
|
||||
disabled
|
||||
+19
@@ -0,0 +1,19 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
# Create the directories used by DPM subsystem
|
||||
|
||||
# msm specific files that need to be created on /data
|
||||
on post-fs-data
|
||||
#Create DATAQTI dir for logs
|
||||
mkdir /data/vendor/dataqti 0770 radio radio
|
||||
chmod 0770 /data/vendor/dataqti
|
||||
|
||||
#start dataqti service
|
||||
service vendor.dataqti /system/vendor/bin/qti
|
||||
class main
|
||||
user radio
|
||||
socket qti_dpm_uds_file dgram 660 radio radio
|
||||
group radio oem_2901 diag usb inet
|
||||
disabled
|
||||
+17
@@ -0,0 +1,17 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
#start dpmQmiMgr service
|
||||
service dpmQmiMgr /system/vendor/bin/dpmQmiMgr
|
||||
interface com.qualcomm.qti.dpm.api@1.0::IdpmQmi dpmQmiService
|
||||
class main
|
||||
user system
|
||||
group system
|
||||
disabled
|
||||
|
||||
on property:persist.vendor.dpmhalservice.enable=*
|
||||
start dpmQmiMgr
|
||||
|
||||
on property:persist.vendor.dpmhalservice.enable=0
|
||||
stop dpmQmiMgr
|
||||
+13
@@ -0,0 +1,13 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
# imsdatadaemon starts with root and UID will be downgraded to RADIO.
|
||||
service vendor.ims_rtp_daemon /vendor/bin/ims_rtp_daemon
|
||||
class main
|
||||
user radio
|
||||
group radio vendor_qti_diag inet log
|
||||
|
||||
on property:vendor.ims.DATA_DAEMON_STATUS=1
|
||||
restart vendor.ims_rtp_daemon
|
||||
+15
@@ -0,0 +1,15 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
# imsdatadaemon starts with root and UID will be downgraded to RADIO.
|
||||
service vendor.imsdatadaemon /vendor/bin/imsdatadaemon
|
||||
class main
|
||||
user radio
|
||||
socket ims_datad stream 0660 system radio
|
||||
group radio wifi inet vendor_qti_diag log
|
||||
disabled
|
||||
|
||||
on property:vendor.ims.QMI_DAEMON_STATUS=1
|
||||
start vendor.imsdatadaemon
|
||||
+10
@@ -0,0 +1,10 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
service vendor.imsqmidaemon /vendor/bin/imsqmidaemon
|
||||
class main
|
||||
user radio
|
||||
socket ims_qmid stream 0660 system radio
|
||||
group radio vendor_qti_diag log
|
||||
+8
@@ -0,0 +1,8 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service vendor.imsrcsservice /vendor/bin/imsrcsd
|
||||
class main
|
||||
user radio
|
||||
group radio vendor_qti_diag log inet wakelock
|
||||
@@ -0,0 +1,2 @@
|
||||
on property:ro.board.platform=msmnile && property:ro.baseband=msm && property:ro.vendor.qti.va_aosp.support=1
|
||||
setprop ro.telephony.iwlan_operation_mode "legacy"
|
||||
+16
@@ -0,0 +1,16 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on post-fs-data
|
||||
# create QDMA dropbox
|
||||
mkdir /data/vendor/qdmastats 0700 system system
|
||||
mkdir /data/vendor/qdma 0770 system system
|
||||
#mkdir /dev/socket/qdma 0777 system system
|
||||
#chmod 2777 /dev/socket/qdma
|
||||
|
||||
service vendor.qcc-trd /system/vendor/bin/qcc-trd
|
||||
class late_start
|
||||
user system
|
||||
group everybody readproc system net_bw_stats radio vendor_rfs_shared sdcard_rw media_rw sdcard_r
|
||||
+11
@@ -0,0 +1,11 @@
|
||||
#! /vendor/etc/init
|
||||
#=============================================================================
|
||||
# Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#=============================================================================
|
||||
|
||||
on early-init
|
||||
# Set ro.boot.product.vendor.sku to soc_name
|
||||
exec u:r:vendor_qti_init_shell:s0 -- /vendor/bin/init.qti.qcv.sh
|
||||
setprop ro.boot.product.vendor.sku ${ro.vendor.qti.soc_name}
|
||||
+14
@@ -0,0 +1,14 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on post-fs-data && property:ro.crypto.state=encrypted && property:ro.crypto.type=file
|
||||
start time_daemon
|
||||
|
||||
service time_daemon /vendor/bin/time_daemon
|
||||
class main
|
||||
user system
|
||||
group system
|
||||
capabilities SYS_TIME
|
||||
+77
@@ -0,0 +1,77 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on boot
|
||||
#Create NETMGR daemon socket area
|
||||
mkdir /dev/socket/netmgr 0750 radio radio
|
||||
|
||||
#Assign TCP buffer thresholds to be ceiling value of technology maximums
|
||||
#Increased technology maximums should be reflected here.
|
||||
write /proc/sys/net/core/rmem_max 16777216
|
||||
write /proc/sys/net/core/wmem_max 8388608
|
||||
|
||||
#Load rmnet_core driver
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_ctl
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_core
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_ctl
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_core
|
||||
|
||||
# msm specific files that need to be created on /data
|
||||
on post-fs-data
|
||||
#Create NETMGR daemon log dir
|
||||
mkdir /data/vendor/netmgr 0770 radio radio
|
||||
chmod 0770 /data/vendor/netmgr
|
||||
|
||||
# Create netmgr recovery folder
|
||||
mkdir /data/vendor/netmgr/recovery 0700 radio radio
|
||||
chmod 0770 /data/vendor/netmgr/recovery
|
||||
write /data/vendor/netmgr/recovery/recovery_info ""
|
||||
chown radio radio /data/vendor/netmgr/recovery/recovery_info
|
||||
|
||||
# Manage netmgrd based on value of property
|
||||
on property:persist.vendor.data.mode=disabled
|
||||
stop vendor.netmgrd
|
||||
|
||||
service vendor.netmgrd /system/vendor/bin/netmgrd
|
||||
class main
|
||||
|
||||
on property:ro.vendor.use_data_netmgrd=false
|
||||
# netmgr not supported on specific target
|
||||
stop vendor.netmgrd
|
||||
|
||||
on property:ro.baseband=apq
|
||||
stop vendor.netmgrd
|
||||
|
||||
on property:persist.vendor.data.shs_ko_load=1
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_shs
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_shs
|
||||
|
||||
on property:persist.vendor.data.shs_ko_load=0
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules rmnet_shs
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules/5.4-gki rmnet_shs
|
||||
|
||||
on property:persist.vendor.data.perf_ko_load=3
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -d /vendor/lib/modules rmnet_perf rmnet_perf_ingress_deag=N
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -d /vendor/lib/modules/5.4-gki rmnet_perf rmnet_perf_ingress_deag=N
|
||||
|
||||
on property:persist.vendor.data.perf_ko_load=2
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -d /vendor/lib/modules rmnet_perf rmnet_perf_opt_mode="udp"
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -d /vendor/lib/modules/5.4-gki rmnet_perf rmnet_perf_opt_mode="udp"
|
||||
|
||||
on property:persist.vendor.data.perf_ko_load=1
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_perf
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_perf
|
||||
|
||||
on property:persist.vendor.data.perf_ko_load=0
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules rmnet_perf
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules/5.4-gki rmnet_perf
|
||||
|
||||
on property:persist.vendor.data.offload_ko_load=1
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_offload
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_offload
|
||||
|
||||
on property:persist.vendor.data.offload_ko_load=0
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules rmnet_offload
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules/5.4-gki rmnet_offload
|
||||
+20
@@ -0,0 +1,20 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on boot
|
||||
#Create PORT-BRIDGE daemon socket area
|
||||
mkdir /dev/socket/port-bridge 0750 radio radio
|
||||
|
||||
# msm specific files that need to be created on /data
|
||||
on post-fs-data
|
||||
#Create port-bridge log dir
|
||||
mkdir /data/vendor/port_bridge 0770 radio radio
|
||||
chmod 0770 /data/vendor/port_bridge
|
||||
|
||||
service vendor.port-bridge /system/vendor/bin/port-bridge
|
||||
class main
|
||||
user radio
|
||||
group radio system inet
|
||||
oneshot
|
||||
+20
@@ -0,0 +1,20 @@
|
||||
service vendor.qcrild /vendor/bin/hw/qcrild
|
||||
class main
|
||||
user radio
|
||||
disabled
|
||||
group radio cache inet misc audio log readproc wakelock oem_2901
|
||||
capabilities BLOCK_SUSPEND NET_ADMIN NET_RAW
|
||||
|
||||
service vendor.qcrild2 /vendor/bin/hw/qcrild -c 2
|
||||
class main
|
||||
user radio
|
||||
disabled
|
||||
group radio cache inet misc audio log readproc wakelock oem_2901
|
||||
capabilities BLOCK_SUSPEND NET_ADMIN NET_RAW
|
||||
|
||||
service vendor.qcrild3 /vendor/bin/hw/qcrild -c 3
|
||||
class main
|
||||
user radio
|
||||
disabled
|
||||
group radio cache inet misc audio log readproc wakelock oem_2901
|
||||
capabilities BLOCK_SUSPEND NET_ADMIN NET_RAW
|
||||
+11
@@ -0,0 +1,11 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
on init
|
||||
start vendor.qseecomd
|
||||
|
||||
service vendor.qseecomd /vendor/bin/qseecomd
|
||||
class core
|
||||
user root
|
||||
group root
|
||||
@@ -0,0 +1,4 @@
|
||||
service display-color-hal-1-0 /vendor/bin/hw/vendor.display.color@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
@@ -0,0 +1,47 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
#
|
||||
# Copyright (c) 2013-2018, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
service vendor.adsprpcd /vendor/bin/adsprpcd
|
||||
class main
|
||||
user system
|
||||
group media
|
||||
|
||||
service vendor.adsprpcd_audiopd /vendor/bin/adsprpcd audiopd
|
||||
class main
|
||||
user media
|
||||
group media
|
||||
|
||||
service vendor.adsprpcd_sensorspd /vendor/bin/adsprpcd sensorspd
|
||||
class core
|
||||
user system
|
||||
group system
|
||||
@@ -0,0 +1,40 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
#
|
||||
# Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
service vendor.cdsprpcd /vendor/bin/cdsprpcd
|
||||
class main
|
||||
user system
|
||||
group system
|
||||
|
||||
on property:vendor.fastrpc.disable.cdsprpcd.daemon=1
|
||||
stop vendor.cdsprpcd
|
||||
@@ -0,0 +1,10 @@
|
||||
#
|
||||
# Copyright (c) 2017-2018, 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
service qti_esepowermanager_service_1_1 /vendor/bin/hw/vendor.qti.esepowermanager@1.1-service
|
||||
class hal
|
||||
user system
|
||||
group nfc system
|
||||
@@ -0,0 +1,11 @@
|
||||
# Copyright (c) 2017 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service alarm-hal-1-0 /vendor/bin/hw/vendor.qti.hardware.alarm@1.0-service
|
||||
interface vendor.qti.hardware.alarm@1.0::IAlarm default
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
oneshot
|
||||
disabled
|
||||
+8
@@ -0,0 +1,8 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service vendor.capabilityconfigstore /vendor/bin/hw/vendor.qti.hardware.capabilityconfigstore@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
+43
@@ -0,0 +1,43 @@
|
||||
# Copyright (c) 2019-2020, Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2013-2018, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
|
||||
service vendor.hvdcp_opti /vendor/bin/hvdcp_opti
|
||||
class main
|
||||
user system
|
||||
group system wakelock
|
||||
capabilities BLOCK_SUSPEND WAKE_ALARM
|
||||
disabled
|
||||
|
||||
service vendor.qti-chg-policy-sh /vendor/bin/init.qti.chg_policy.sh
|
||||
class core
|
||||
user root
|
||||
oneshot
|
||||
disabled
|
||||
|
||||
on boot
|
||||
enable vendor.qti-chg-policy-sh
|
||||
start vendor.qti-chg-policy-sh
|
||||
|
||||
on charger
|
||||
chown radio wakelock /sys/power/wake_lock
|
||||
chmod 0660 /sys/power/wake_lock
|
||||
chown radio wakelock /sys/power/wake_unlock
|
||||
chmod 0660 /sys/power/wake_unlock
|
||||
mkdir /mnt/vendor/persist/hvdcp_opti 0770 root system
|
||||
mount_all /vendor/etc/charger_fstab.qti --early
|
||||
enable vendor.qti-chg-policy-sh
|
||||
start vendor.qti-chg-policy-sh
|
||||
|
||||
on property:persist.vendor.hvdcp_opti.start=2
|
||||
rmdir /mnt/vendor/persist/hvdcp_opti
|
||||
setprop persist.vendor.hvdcp_opti.start 0
|
||||
|
||||
on property:persist.vendor.hvdcp_opti.start=1
|
||||
mkdir /mnt/vendor/persist/hvdcp_opti 0770 root system
|
||||
enable vendor.hvdcp_opti
|
||||
start vendor.hvdcp_opti
|
||||
setprop persist.vendor.hvdcp_opti.start 0
|
||||
@@ -0,0 +1,13 @@
|
||||
# Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
service vendor.dspservice /vendor/bin/dspservice
|
||||
class hal
|
||||
user system
|
||||
group system wakelock oem_2908
|
||||
capabilities BLOCK_SUSPEND
|
||||
interface vendor.qti.hardware.dsp@1.0::IDspService dspservice
|
||||
|
||||
# uncomment below to disable service at boot
|
||||
# disabled
|
||||
@@ -0,0 +1,15 @@
|
||||
#
|
||||
# Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on post-fs-data
|
||||
# create QDMA shard dropbox
|
||||
mkdir /data/vendor/qdma/shared 0770 system system
|
||||
mkdir /data/vendor/qdma/shared/3 0770 system system
|
||||
|
||||
service qccvndhalservice /vendor/bin/hw/vendor.qti.hardware.qccvndhal@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
@@ -0,0 +1,14 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
#
|
||||
|
||||
on init
|
||||
start qseecom-service
|
||||
|
||||
service qseecom-service /vendor/bin/hw/vendor.qti.hardware.qseecom@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system drmrpc
|
||||
@@ -0,0 +1,4 @@
|
||||
service qteeconnector-hal-1-0 /vendor/bin/hw/vendor.qti.hardware.qteeconnector@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
@@ -0,0 +1,8 @@
|
||||
# Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service soter-1-0 /vendor/bin/hw/vendor.qti.hardware.soter@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system drmrpc
|
||||
@@ -0,0 +1,4 @@
|
||||
service tui_comm-1-0 /vendor/bin/hw/vendor.qti.hardware.tui_comm@1.0-service-qti
|
||||
class hal
|
||||
user system
|
||||
group system drmrpc
|
||||
@@ -0,0 +1,7 @@
|
||||
service vendor-qti-media-c2-hal-1-0 /vendor/bin/hw/vendor.qti.media.c2@1.0-service
|
||||
class hal
|
||||
user mediacodec
|
||||
group mediadrm camera drmrpc system
|
||||
ioprio rt 4
|
||||
writepid /dev/cpuset/foreground/tasks
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
service vendor.rmt_storage /vendor/bin/rmt_storage
|
||||
class core
|
||||
user root
|
||||
shutdown critical
|
||||
ioprio rt 0
|
||||
+13
@@ -0,0 +1,13 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
# Create pddump directory
|
||||
on post-fs-data
|
||||
mkdir /data/vendor/pddump 0770 oem_2903 oem_2903
|
||||
|
||||
service vendor.tftp_server /vendor/bin/tftp_server
|
||||
class core
|
||||
user root
|
||||
Vendored
+277
@@ -0,0 +1,277 @@
|
||||
#########################################
|
||||
# Log verbosity control for izat modules
|
||||
#########################################
|
||||
# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5
|
||||
IZAT_DEBUG_LEVEL = 2
|
||||
|
||||
##################################################
|
||||
# Select WIFI Wait Timeout value in seconds for SUPL
|
||||
##################################################
|
||||
WIFI_WAIT_TIMEOUT_SELECT = 0
|
||||
|
||||
##################################################
|
||||
# Time interval of injecting SRN scan data to modem
|
||||
# time in seconds.
|
||||
# Note: recommended value is between 1-5 sec
|
||||
##################################################
|
||||
LPPE_SRN_DATA_SCAN_INJECT_TIME=2
|
||||
|
||||
################################
|
||||
# NLP Settings
|
||||
################################
|
||||
# NLP_MODE 1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred
|
||||
# For Automotive products, please use NLP_MODE = 4 only.
|
||||
# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
|
||||
# to determine how much Tolerance for first position
|
||||
# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
|
||||
# to determine how much Tolerance for positions after first
|
||||
# NLP_THRESHOLD: Sets how many failures needed before
|
||||
# switching preferred NLP in Combo mode
|
||||
# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
|
||||
# must be, in multiples, between two NLP location reports to
|
||||
# be considered much worse accuracy. Used in switching logic
|
||||
# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines
|
||||
# whether or not to still send network location requests to
|
||||
# QNP when the EULA is not consented to by the user. QNP can
|
||||
# still return ZPP locations or injected locations even
|
||||
# without EULA consent, but the uncertainty can be high.
|
||||
# QNP preferred mode prefers QNP when there is EULA consent,
|
||||
# otherwise OSNLP is used.
|
||||
NLP_MODE = 1
|
||||
NLP_MODE_EMERGENCY = 2
|
||||
NLP_TOLERANCE_TIME_FIRST = 5000
|
||||
NLP_TOLERANCE_TIME_AFTER = 20000
|
||||
NLP_THRESHOLD = 3
|
||||
NLP_ACCURACY_MULTIPLE = 2
|
||||
NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1
|
||||
|
||||
#########################################
|
||||
# NLP PACKAGE SETTINGS
|
||||
#########################################
|
||||
# OSNLP_PACKAGE: name of default NLP package
|
||||
OSNLP_PACKAGE = com.google.android.gms
|
||||
# REGION_OSNLP_PACKAGE:
|
||||
# This value will be used as alternative
|
||||
# for particular region where default NLP is not functional.
|
||||
#REGION_OSNLP_PACKAGE =
|
||||
|
||||
###################################
|
||||
# GEOFENCE SERVICES
|
||||
###################################
|
||||
# If set to one of the defined values below, it will override
|
||||
# the responsiveness for geofence services, which implements
|
||||
# the Proximity Alert API. If not set to a value defined below,
|
||||
# which is default, it will not override the responsivness.
|
||||
# The geofence HAL API is unaffected by this value.
|
||||
# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
|
||||
# 1: LOW responsiveness
|
||||
# 2: MEDIUM responsiveness
|
||||
# 3: HIGH responsiveness
|
||||
GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
|
||||
|
||||
#####################################
|
||||
#GTP Opt-In app
|
||||
#####################################
|
||||
|
||||
#GTP privacy policy version url
|
||||
#https support is required
|
||||
GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html
|
||||
|
||||
#GTP privacy policy version download retry interval
|
||||
#unit is second. default is 86400
|
||||
GTP_PRIVACY_RETRY_INTERVAL = 86400
|
||||
|
||||
#####################################
|
||||
# IZAT PREMIUM FEATURE SETTINGS
|
||||
#####################################
|
||||
#Possible states of a feature:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
#PREMIUM
|
||||
|
||||
#GTP_MODE valid modes:
|
||||
# DISABLED
|
||||
# LEGACY_WWAN
|
||||
# SDK (WWAN not available for Modems before LocTech 10.0)
|
||||
# SDK_WIFI (WWAN provided by legacy Modem)
|
||||
GTP_MODE=DISABLED
|
||||
|
||||
#GTP_WAA valid modes:
|
||||
# DISABLED
|
||||
# BASIC
|
||||
GTP_WAA=DISABLED
|
||||
|
||||
#SAP valid modes:
|
||||
# DISABLED
|
||||
# BASIC
|
||||
# PREMIUM
|
||||
# PREMIUM_ENV_AIDING
|
||||
# MODEM_DEFAULT
|
||||
SAP=MODEM_DEFAULT
|
||||
|
||||
#FREE_WIFI_SCAN_INJECT valid modes:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
FREE_WIFI_SCAN_INJECT=BASIC
|
||||
|
||||
#SUPL_WIFI valid modes:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
SUPL_WIFI=BASIC
|
||||
|
||||
#WIFI_SUPPLICANT_INFO valid modes:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
WIFI_SUPPLICANT_INFO=BASIC
|
||||
|
||||
#####################################
|
||||
# Location process launcher settings
|
||||
#####################################
|
||||
|
||||
# DO NOT MODIFY
|
||||
# Modifying below attributes without
|
||||
# caution can have serious implications.
|
||||
|
||||
#Values for PROCESS_STATE:
|
||||
# ENABLED
|
||||
# DISABLED
|
||||
|
||||
#Values for LOW_RAM_TARGETS:
|
||||
# ENABLED
|
||||
# DISABLED
|
||||
# Property to enable/disable processes for low ram targets. Uses ro.config.low_ram property
|
||||
# to identify low ram targets.
|
||||
|
||||
#PROCESS_NAME
|
||||
# Name of the executable file.
|
||||
|
||||
#FEATURE MASKS:
|
||||
# GTP-WIFI 0X03
|
||||
# GTP-MP-CELL 0xc00
|
||||
# GTP-WAA 0x100
|
||||
# SAP 0Xc0
|
||||
# ODCPI 0x1000
|
||||
# FREE_WIFI_SCAN_INJECT 0x2000
|
||||
# SUPL_WIFI 0x4000
|
||||
# WIFI_SUPPLICANT_INFO 0x8000
|
||||
|
||||
#Values for PLATFORMS can be:
|
||||
#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
|
||||
#2. 'all' or 'all exclude' -> for All platforms
|
||||
#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937
|
||||
|
||||
#Values for SOC_IDS can be:
|
||||
#1. Any valid values obtained from soc_id node separated by single space. For example: 339 386 436
|
||||
## soc_id value can be obtained from any one of below node:
|
||||
## - /sys/devices/soc0/soc_id
|
||||
## - /sys/devices/system/soc/soc0/id
|
||||
#2. 'all' or 'all exclude' -> for All soc id's
|
||||
#3. 'all exclude XXXX' -> All soc id's exclude XXXX. For example: all exclude 339 386
|
||||
|
||||
#Values for BASEBAND can be:
|
||||
#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
|
||||
#2. 'all' or 'all exclude' -> for all basebands
|
||||
#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
|
||||
PROCESS_NAME=lowi-server
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=gps wifi inet oem_2901
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0xf303
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=0
|
||||
|
||||
PROCESS_NAME=xtwifi-inet-agent
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=inet gps
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xc03
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all exclude 386 436
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
PROCESS_NAME=xtwifi-client
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=wifi inet gps system oem_2904
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xd03
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all exclude 386 436
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
PROCESS_NAME=slim_daemon
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=gps oem_2901 can plugdev diag sensors
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xf0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all exclude 386 436
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
PROCESS_NAME=xtra-daemon
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=inet gps system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=ENABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=0
|
||||
|
||||
########################################
|
||||
# Engine Service which host DRE module #
|
||||
# To enable DRE engine service, change #
|
||||
# PROCESS_STATE=ENABLED #
|
||||
########################################
|
||||
PROCESS_NAME=engine-service
|
||||
PROCESS_ARGUMENT=DRE-INT libloc_epDr.so
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=gps diag inet qwes oem_2901 system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
########################################
|
||||
# Engine Service which host PPE module #
|
||||
# To enable PPE engine service, change #
|
||||
# PROCESS_STATE=ENABLED #
|
||||
# and update process arugements #
|
||||
# with PPE library name #
|
||||
#PROCESS_ARGUMENT=PPE libepsimulator.so#
|
||||
########################################
|
||||
PROCESS_NAME=engine-service
|
||||
PROCESS_ARGUMENT=PPE libepsimulator.so
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=gps diag inet qwes oem_2901 system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
Vendored
+27
@@ -0,0 +1,27 @@
|
||||
#*====*====*====*====*====*====*====*====*====*====*====*====*====*====*====*
|
||||
#
|
||||
# LOWI Config file - default
|
||||
#
|
||||
# GENERAL DESCRIPTION
|
||||
# This file contains the config params for LOWI
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# 2012-2013 Qualcomm Atheros, Inc.
|
||||
# All Rights Reserved.
|
||||
# Qualcomm Atheros Confidential and Proprietary.
|
||||
#
|
||||
# Export of this technology or software is regulated by the U.S. Government.
|
||||
# Diversion contrary to U.S. law prohibited.
|
||||
#=============================================================================*/
|
||||
|
||||
# X86 ONLY - UBUNTU:
|
||||
# Copy this file in the same directory where the executable is
|
||||
|
||||
# Log level
|
||||
# EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100
|
||||
LOWI_LOG_LEVEL = 3
|
||||
LOWI_USE_LOWI_LP = 0
|
||||
|
||||
+867
@@ -0,0 +1,867 @@
|
||||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!-- Copyright 2013 The Android Open Source Project
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
-->
|
||||
<!DOCTYPE MediaSettings [
|
||||
<!ELEMENT MediaSettings (CamcorderProfiles,
|
||||
EncoderOutputFileFormat+,
|
||||
VideoEncoderCap+,
|
||||
AudioEncoderCap+,
|
||||
VideoDecoderCap,
|
||||
AudioDecoderCap)>
|
||||
<!ELEMENT CamcorderProfiles (EncoderProfile+, ImageEncoding+, ImageDecoding, Camera)>
|
||||
<!ELEMENT EncoderProfile (Video, Audio)>
|
||||
<!ATTLIST EncoderProfile quality (high|low) #REQUIRED>
|
||||
<!ATTLIST EncoderProfile fileFormat (mp4|3gp) #REQUIRED>
|
||||
<!ATTLIST EncoderProfile duration (30|60) #REQUIRED>
|
||||
<!ATTLIST EncoderProfile cameraId (0|1|2|3|4|5) #REQUIRED>
|
||||
<!ELEMENT Video EMPTY>
|
||||
<!ATTLIST Video codec (h264|h263|m4v) #REQUIRED>
|
||||
<!ATTLIST Video bitRate CDATA #REQUIRED>
|
||||
<!ATTLIST Video width CDATA #REQUIRED>
|
||||
<!ATTLIST Video height CDATA #REQUIRED>
|
||||
<!ATTLIST Video frameRate CDATA #REQUIRED>
|
||||
<!ELEMENT Audio EMPTY>
|
||||
<!ATTLIST Audio codec (amrnb|amrwb|aac) #REQUIRED>
|
||||
<!ATTLIST Audio bitRate CDATA #REQUIRED>
|
||||
<!ATTLIST Audio sampleRate CDATA #REQUIRED>
|
||||
<!ATTLIST Audio channels (1|2) #REQUIRED>
|
||||
<!ELEMENT ImageEncoding EMPTY>
|
||||
<!ATTLIST ImageEncoding quality (90|80|70|60|50|40) #REQUIRED>
|
||||
<!ELEMENT ImageDecoding EMPTY>
|
||||
<!ATTLIST ImageDecoding memCap CDATA #REQUIRED>
|
||||
<!ELEMENT Camera EMPTY>
|
||||
<!ELEMENT EncoderOutputFileFormat EMPTY>
|
||||
<!ATTLIST EncoderOutputFileFormat name (mp4|3gp) #REQUIRED>
|
||||
<!ELEMENT VideoEncoderCap EMPTY>
|
||||
<!ATTLIST VideoEncoderCap name (h264|h263|m4v|wmv) #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap enabled (true|false) #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap minBitRate CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxBitRate CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap minFrameWidth CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxFrameWidth CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap minFrameHeight CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxFrameHeight CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap minFrameRate CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxFrameRate CDATA #REQUIRED>
|
||||
<!ELEMENT AudioEncoderCap EMPTY>
|
||||
<!ATTLIST AudioEncoderCap name (amrnb|amrwb|aac|wma) #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap enabled (true|false) #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap minBitRate CDATA #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap maxBitRate CDATA #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap minSampleRate CDATA #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap maxSampleRate CDATA #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap minChannels (1|2) #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap maxChannels (1|2) #REQUIRED>
|
||||
<!ELEMENT VideoDecoderCap EMPTY>
|
||||
<!ATTLIST VideoDecoderCap name (wmv) #REQUIRED>
|
||||
<!ATTLIST VideoDecoderCap enabled (true|false) #REQUIRED>
|
||||
<!ELEMENT AudioDecoderCap EMPTY>
|
||||
<!ATTLIST AudioDecoderCap name (wma) #REQUIRED>
|
||||
<!ATTLIST AudioDecoderCap enabled (true|false) #REQUIRED>
|
||||
]>
|
||||
<!--
|
||||
This file is used to declare the multimedia profiles and capabilities
|
||||
on an android-powered device.
|
||||
-->
|
||||
<MediaSettings>
|
||||
<!-- Each camcorder profile defines a set of predefined configuration parameters -->
|
||||
<CamcorderProfiles cameraId="0">
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="3gp" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="128000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="17000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="17000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
|
||||
<CamcorderProfiles cameraId="1">
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="3gp" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="128000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
<CamcorderProfiles cameraId="2">
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="3gp" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="128000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="17000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="17000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
|
||||
<CamcorderProfiles cameraId="3">
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="3gp" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="128000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
<CamcorderProfiles cameraId="4">
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="3gp" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="128000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="17000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="17000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
|
||||
<CamcorderProfiles cameraId="5">
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="3gp" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="128000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
|
||||
<EncoderOutputFileFormat name="3gp" />
|
||||
<EncoderOutputFileFormat name="mp4" />
|
||||
|
||||
<!--
|
||||
If a codec is not enabled, it is invisible to the applications
|
||||
In other words, the applications won't be able to use the codec
|
||||
or query the capabilities of the codec at all if it is disabled
|
||||
-->
|
||||
<VideoEncoderCap name="h264" enabled="true"
|
||||
minBitRate="64000" maxBitRate="40000000"
|
||||
minFrameWidth="176" maxFrameWidth="1920"
|
||||
minFrameHeight="144" maxFrameHeight="1080"
|
||||
minFrameRate="15" maxFrameRate="30" />
|
||||
|
||||
<VideoEncoderCap name="h263" enabled="true"
|
||||
minBitRate="64000" maxBitRate="2000000"
|
||||
minFrameWidth="176" maxFrameWidth="800"
|
||||
minFrameHeight="144" maxFrameHeight="480"
|
||||
minFrameRate="15" maxFrameRate="30" />
|
||||
|
||||
<VideoEncoderCap name="m4v" enabled="true"
|
||||
minBitRate="64000" maxBitRate="40000000"
|
||||
minFrameWidth="176" maxFrameWidth="1920"
|
||||
minFrameHeight="144" maxFrameHeight="1080"
|
||||
minFrameRate="15" maxFrameRate="30" />
|
||||
|
||||
<AudioEncoderCap name="aac" enabled="true"
|
||||
minBitRate="758" maxBitRate="288000"
|
||||
minSampleRate="8000" maxSampleRate="48000"
|
||||
minChannels="1" maxChannels="2" />
|
||||
|
||||
<AudioEncoderCap name="heaac" enabled="true"
|
||||
minBitRate="8000" maxBitRate="64000"
|
||||
minSampleRate="16000" maxSampleRate="48000"
|
||||
minChannels="1" maxChannels="2" />
|
||||
|
||||
<AudioEncoderCap name="aaceld" enabled="true"
|
||||
minBitRate="16000" maxBitRate="192000"
|
||||
minSampleRate="16000" maxSampleRate="48000"
|
||||
minChannels="1" maxChannels="2" />
|
||||
|
||||
<AudioEncoderCap name="amrwb" enabled="true"
|
||||
minBitRate="6600" maxBitRate="23050"
|
||||
minSampleRate="16000" maxSampleRate="16000"
|
||||
minChannels="1" maxChannels="1" />
|
||||
|
||||
<AudioEncoderCap name="amrnb" enabled="true"
|
||||
minBitRate="5525" maxBitRate="12200"
|
||||
minSampleRate="8000" maxSampleRate="8000"
|
||||
minChannels="1" maxChannels="1" />
|
||||
|
||||
<!--
|
||||
FIXME:
|
||||
We do not check decoder capabilities at present
|
||||
At present, we only check whether windows media is visible
|
||||
for TEST applications. For other applications, we do
|
||||
not perform any checks at all.
|
||||
-->
|
||||
<VideoDecoderCap name="wmv" enabled="false"/>
|
||||
<AudioDecoderCap name="wma" enabled="false"/>
|
||||
</MediaSettings>
|
||||
+802
@@ -0,0 +1,802 @@
|
||||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!-- Copyright (C) 2010 The Android Open Source Project
|
||||
Copyright (C) 2012-2018 The Linux Foundation. All rights reserved.
|
||||
Not a contribution.
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
-->
|
||||
<!DOCTYPE MediaSettings [
|
||||
<!ELEMENT MediaSettings (CamcorderProfiles,
|
||||
EncoderOutputFileFormat+,
|
||||
VideoEncoderCap+,
|
||||
AudioEncoderCap+,
|
||||
VideoDecoderCap,
|
||||
AudioDecoderCap)>
|
||||
<!ELEMENT CamcorderProfiles (EncoderProfile+, ImageEncoding+, ImageDecoding, Camera)>
|
||||
<!ELEMENT EncoderProfile (Video, Audio)>
|
||||
<!ATTLIST EncoderProfile quality (high|low) #REQUIRED>
|
||||
<!ATTLIST EncoderProfile fileFormat (mp4|3gp) #REQUIRED>
|
||||
<!ATTLIST EncoderProfile duration (30|60) #REQUIRED>
|
||||
<!ATTLIST EncoderProfile cameraId (0|1) #REQUIRED>
|
||||
<!ELEMENT Video EMPTY>
|
||||
<!ATTLIST Video codec (h264|h263|m4v) #REQUIRED>
|
||||
<!ATTLIST Video bitRate CDATA #REQUIRED>
|
||||
<!ATTLIST Video width CDATA #REQUIRED>
|
||||
<!ATTLIST Video height CDATA #REQUIRED>
|
||||
<!ATTLIST Video frameRate CDATA #REQUIRED>
|
||||
<!ELEMENT Audio EMPTY>
|
||||
<!ATTLIST Audio codec (amrnb|amrwb|aac|lpcm) #REQUIRED>
|
||||
<!ATTLIST Audio bitRate CDATA #REQUIRED>
|
||||
<!ATTLIST Audio sampleRate CDATA #REQUIRED>
|
||||
<!ATTLIST Audio channels (1|2|6) #REQUIRED>
|
||||
<!ELEMENT ImageEncoding EMPTY>
|
||||
<!ATTLIST ImageEncoding quality (90|80|70|60|50|40) #REQUIRED>
|
||||
<!ELEMENT ImageDecoding EMPTY>
|
||||
<!ATTLIST ImageDecoding memCap CDATA #REQUIRED>
|
||||
<!ELEMENT Camera EMPTY>
|
||||
<!ELEMENT EncoderOutputFileFormat EMPTY>
|
||||
<!ATTLIST EncoderOutputFileFormat name (mp4|3gp) #REQUIRED>
|
||||
<!ELEMENT VideoEncoderCap EMPTY>
|
||||
<!ATTLIST VideoEncoderCap name (hevc|h264|h263|m4v|wmv) #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap enabled (true|false) #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap minBitRate CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxBitRate CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap minFrameWidth CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxFrameWidth CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap minFrameHeight CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxFrameHeight CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap minFrameRate CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxFrameRate CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxHFRFrameWidth CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxHFRFrameHeight CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxHFRMode CDATA #REQUIRED>
|
||||
<!ELEMENT AudioEncoderCap EMPTY>
|
||||
<!ATTLIST AudioEncoderCap name (amrnb|amrwb|aac|wma|lpcm) #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap enabled (true|false) #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap minBitRate CDATA #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap maxBitRate CDATA #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap minSampleRate CDATA #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap maxSampleRate CDATA #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap minChannels (1|2|6) #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap maxChannels (1|2|6) #REQUIRED>
|
||||
<!ELEMENT VideoDecoderCap EMPTY>
|
||||
<!ATTLIST VideoDecoderCap name (wmv) #REQUIRED>
|
||||
<!ATTLIST VideoDecoderCap enabled (true|false) #REQUIRED>
|
||||
<!ELEMENT AudioDecoderCap EMPTY>
|
||||
<!ATTLIST AudioDecoderCap name (wma) #REQUIRED>
|
||||
<!ATTLIST AudioDecoderCap enabled (true|false) #REQUIRED>
|
||||
<!ELEMENT VideoEditorCap EMPTY>
|
||||
<!ATTLIST VideoEditorCap maxInputFrameWidth CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEditorCap maxInputFrameHeight CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEditorCap maxOutputFrameWidth CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEditorCap maxOutputFrameHeight CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEditorCap maxPrefetchYUVFrames CDATA #REQUIRED>
|
||||
<!ELEMENT ExportVideoProfile EMPTY>
|
||||
<!ATTLIST ExportVideoProfile name (h264|h263|m4v) #REQUIRED>
|
||||
<!ATTLIST ExportVideoProfile profile CDATA #REQUIRED>
|
||||
<!ATTLIST ExportVideoProfile level CDATA #REQUIRED>
|
||||
]>
|
||||
<!--
|
||||
This file is used to declare the multimedia profiles and capabilities
|
||||
on an android-powered device.
|
||||
-->
|
||||
<MediaSettings>
|
||||
<!-- Each camcorder profile defines a set of predefined configuration parameters -->
|
||||
<!-- Back Camera -->
|
||||
<CamcorderProfiles cameraId="0">
|
||||
|
||||
<EncoderProfile quality="low" fileFormat="3gp" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="high" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="42000000"
|
||||
width="3840"
|
||||
height="2160"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="mp4" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="512000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="3gp" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="720000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="2000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="14000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="20000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
<!--
|
||||
<EncoderProfile quality="qhd" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="42000000"
|
||||
width="2560"
|
||||
height="1440"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
-->
|
||||
<!--
|
||||
<EncoderProfile quality="2k" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="20000000"
|
||||
width="2048"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
-->
|
||||
|
||||
<EncoderProfile quality="2160p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="42000000"
|
||||
width="3840"
|
||||
height="2160"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="qcif" fileFormat="3gp" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="vga" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="2000000"
|
||||
width="640"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapselow" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsehigh" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="42000000"
|
||||
width="3840"
|
||||
height="2160"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="720000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
|
||||
<EncoderProfile quality="timelapseqvga" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="512000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsevga" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="2000000"
|
||||
width="640"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="2000000"
|
||||
width="640"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="14000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="20000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
<!--
|
||||
<EncoderProfile quality="timelapseqhd" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="42000000"
|
||||
width="2560"
|
||||
height="1440"
|
||||
frameRate="30" />
|
||||
-->
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<!--
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
-->
|
||||
<!--
|
||||
<EncoderProfile quality="timelapse2k" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="20000000"
|
||||
width="2048"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
-->
|
||||
<!-- audio setting is ignored -->
|
||||
<!--
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
-->
|
||||
<EncoderProfile quality="timelapse2160p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="42000000"
|
||||
width="3840"
|
||||
height="2160"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
<!-- Front Camera -->
|
||||
<CamcorderProfiles cameraId="1">
|
||||
|
||||
<EncoderProfile quality="low" fileFormat="3gp" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="high" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="20000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="mp4" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="512000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="3gp" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="720000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="2000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="14000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="20000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="qcif" fileFormat="3gp" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="vga" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="2000000"
|
||||
width="640"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<!-- TIMELAPSE profiles for front camera -->
|
||||
<EncoderProfile quality="timelapselow" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsehigh" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="20000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqvga" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="512000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsevga" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="2000000"
|
||||
width="640"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="5000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="8000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="20000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="156000"
|
||||
sampleRate="48000"
|
||||
channels="2" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
|
||||
<EncoderOutputFileFormat name="3gp" />
|
||||
<EncoderOutputFileFormat name="mp4" />
|
||||
|
||||
<!--
|
||||
If a codec is not enabled, it is invisible to the applications
|
||||
In other words, the applications won't be able to use the codec
|
||||
or query the capabilities of the codec at all if it is disabled
|
||||
-->
|
||||
<VideoEncoderCap name="h264" enabled="true"
|
||||
minBitRate="64000" maxBitRate="42000000"
|
||||
minFrameWidth="176" maxFrameWidth="4096"
|
||||
minFrameHeight="144" maxFrameHeight="2160"
|
||||
minFrameRate="15" maxFrameRate="30"
|
||||
maxHFRFrameWidth="1920" maxHFRFrameHeight="1080"
|
||||
maxHFRMode="120" />
|
||||
|
||||
<VideoEncoderCap name="h263" enabled="true"
|
||||
minBitRate="64000" maxBitRate="2000000"
|
||||
minFrameWidth="176" maxFrameWidth="800"
|
||||
minFrameHeight="144" maxFrameHeight="480"
|
||||
minFrameRate="15" maxFrameRate="30"
|
||||
maxHFRFrameWidth="0" maxHFRFrameHeight="0"
|
||||
maxHFRMode="0" />
|
||||
|
||||
<VideoEncoderCap name="m4v" enabled="true"
|
||||
minBitRate="64000" maxBitRate="20000000"
|
||||
minFrameWidth="176" maxFrameWidth="1280"
|
||||
minFrameHeight="144" maxFrameHeight="720"
|
||||
minFrameRate="15" maxFrameRate="30"
|
||||
maxHFRFrameWidth="0" maxHFRFrameHeight="0"
|
||||
maxHFRMode="0" />
|
||||
|
||||
<VideoEncoderCap name="hevc" enabled="true"
|
||||
minBitRate="64000" maxBitRate="100000000"
|
||||
minFrameWidth="176" maxFrameWidth="4096"
|
||||
minFrameHeight="144" maxFrameHeight="2160"
|
||||
minFrameRate="15" maxFrameRate="30"
|
||||
maxHFRFrameWidth="0" maxHFRFrameHeight="0"
|
||||
maxHFRMode="0" />
|
||||
|
||||
<AudioEncoderCap name="aac" enabled="true"
|
||||
minBitRate="8000" maxBitRate="96000"
|
||||
minSampleRate="8000" maxSampleRate="48000"
|
||||
minChannels="1" maxChannels="6" />
|
||||
|
||||
<AudioEncoderCap name="heaac" enabled="true"
|
||||
minBitRate="8000" maxBitRate="64000"
|
||||
minSampleRate="16000" maxSampleRate="48000"
|
||||
minChannels="1" maxChannels="1" />
|
||||
|
||||
<AudioEncoderCap name="aaceld" enabled="true"
|
||||
minBitRate="16000" maxBitRate="192000"
|
||||
minSampleRate="16000" maxSampleRate="48000"
|
||||
minChannels="1" maxChannels="1" />
|
||||
|
||||
<AudioEncoderCap name="amrwb" enabled="true"
|
||||
minBitRate="6600" maxBitRate="23850"
|
||||
minSampleRate="16000" maxSampleRate="16000"
|
||||
minChannels="1" maxChannels="1" />
|
||||
|
||||
<AudioEncoderCap name="amrnb" enabled="true"
|
||||
minBitRate="5525" maxBitRate="12200"
|
||||
minSampleRate="8000" maxSampleRate="8000"
|
||||
minChannels="1" maxChannels="1" />
|
||||
|
||||
<AudioEncoderCap name="lpcm" enabled="true"
|
||||
minBitRate="768000" maxBitRate="4608000"
|
||||
minSampleRate="8000" maxSampleRate="48000"
|
||||
minChannels="1" maxChannels="6" />
|
||||
|
||||
<!--
|
||||
FIXME:
|
||||
We do not check decoder capabilities at present
|
||||
At present, we only check whether windows media is visible
|
||||
for TEST applications. For other applications, we do
|
||||
not perform any checks at all.
|
||||
-->
|
||||
<VideoDecoderCap name="wmv" enabled="true"/>
|
||||
<AudioDecoderCap name="wma" enabled="true"/>
|
||||
|
||||
<!--
|
||||
The VideoEditor Capability configuration:
|
||||
- maxInputFrameWidth: maximum video width of imported video clip.
|
||||
- maxInputFrameHeight: maximum video height of imported video clip.
|
||||
- maxOutputFrameWidth: maximum video width of exported video clip.
|
||||
- maxOutputFrameHeight: maximum video height of exported video clip.
|
||||
- maxPrefetchYUVFrames: maximum prefetch YUV frames for encoder,
|
||||
used to limit the amount of memory for prefetched YUV frames.
|
||||
For this platform, it allows maximum 30MB(3MB per 1080p frame x 10
|
||||
frames) memory.
|
||||
-->
|
||||
<VideoEditorCap maxInputFrameWidth="1920"
|
||||
maxInputFrameHeight="1088" maxOutputFrameWidth="1920"
|
||||
maxOutputFrameHeight="1088" maxPrefetchYUVFrames="10"/>
|
||||
<!--
|
||||
The VideoEditor Export codec profile and level values
|
||||
correspond to the values in OMX_Video.h.
|
||||
E.g. for h264, profile value 1 means OMX_VIDEO_AVCProfileBaseline
|
||||
and level 4096 means OMX_VIDEO_AVCLevel41.
|
||||
Please note that the values are in decimal.
|
||||
These values are for video encoder.
|
||||
-->
|
||||
<!--
|
||||
Codec = h.264, Baseline profile, level 4.0
|
||||
-->
|
||||
<ExportVideoProfile name="h264" profile= "1" level="2048"/>
|
||||
<!--
|
||||
Codec = h.263, Baseline profile, level 70
|
||||
-->
|
||||
<ExportVideoProfile name="h263" profile= "1" level="128"/>
|
||||
<!--
|
||||
Codec = mpeg4, Simple profile, level 5
|
||||
-->
|
||||
<ExportVideoProfile name="m4v" profile= "1" level="128"/>
|
||||
</MediaSettings>
|
||||
+32
@@ -0,0 +1,32 @@
|
||||
# Copyright (c) 2017, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
#
|
||||
|
||||
PRIO=1,1,1,1,0,0,0,0
|
||||
#arch_timer, arm-pmu, arch_mem_timer
|
||||
IGNORED_IRQ=19,22,39
|
||||
Vendored
+179
@@ -0,0 +1,179 @@
|
||||
################################
|
||||
# Sensor Settings
|
||||
################################
|
||||
#The following parameters are optional.
|
||||
#Internal defaults support MEMS sensors
|
||||
#native to most handset devices.
|
||||
#Device specific sensor characterization
|
||||
#for improved performance is possible as
|
||||
#described in SAP application notes.
|
||||
#GYRO_BIAS_RANDOM_WALK=
|
||||
#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
#RATE_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
|
||||
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
||||
# 4 - Debug, 5 - Verbose
|
||||
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
||||
DEBUG_LEVEL = 0
|
||||
# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
|
||||
# used in loc_eng_reinit
|
||||
SENSOR_ACCEL_BATCHES_PER_SEC=2
|
||||
SENSOR_ACCEL_SAMPLES_PER_BATCH=5
|
||||
SENSOR_GYRO_BATCHES_PER_SEC=2
|
||||
SENSOR_GYRO_SAMPLES_PER_BATCH=5
|
||||
# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
|
||||
SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
|
||||
SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
|
||||
SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
|
||||
SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
|
||||
|
||||
# Sensor Control Mode (0=AUTO, 1=FORCE_ON, 2=MODEM_DEFAULT)
|
||||
# used in loc_eng_reinit
|
||||
SENSOR_CONTROL_MODE=2
|
||||
|
||||
# Bit mask used to define which sensor algorithms are used.
|
||||
# Setting each bit has the following definition:
|
||||
# 0x1 - DISABLE_INS_POSITIONING_FILTER
|
||||
# 0x0 - ENABLE_INS_POSITIONING_FILTER
|
||||
SENSOR_ALGORITHM_CONFIG_MASK=0x0
|
||||
|
||||
#Vehicle Network Provider configuration
|
||||
|
||||
#Service configuration strings
|
||||
#The number before colon in VN_X items defines version of the format of the rest of the string
|
||||
#VN_ACCEL_CFG=0:5
|
||||
#VN_GYRO_CFG=0:5.5
|
||||
#VN_ODOMETRY_CFG=0:2,4.5
|
||||
|
||||
################################################
|
||||
# QDR3 configurations #
|
||||
################################################
|
||||
#VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2
|
||||
#VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
|
||||
VN_SPEED_CFG=1:777,0,0,1,3,1,0.002778,0,40,8,32,8
|
||||
VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
|
||||
|
||||
################################################
|
||||
# QDR2-Gyro configurations #
|
||||
################################################
|
||||
#VN_GYRO_CFG=1:555,0,1,0,0,0,0,-6.5,6.6066,-6.5,-1.00,2,6.607,6.6068,0,0,16,0.0002,0,16,0.0002,0,16,0.0002
|
||||
#VN_SPEED_CFG=1:555,0,0,1,2,1,0.01,0,56,8,48,8
|
||||
#VN_GEAR_CFG=1:555,16,4,0,1,1,9,0,1,2,3,4,5,6,7,8
|
||||
|
||||
################################################
|
||||
# QDR2-DWT configurations #
|
||||
################################################
|
||||
#VN_SPEED_CFG=1:555,22,1,2,1,1,1,0,8,8,23,1,2,0,1,0,8,8,23,1
|
||||
#VN_GEAR_CFG=1:555,12,4,16,14,16,8,1,2,3,4,5,6,7,8
|
||||
#VN_DWS_CFG=1:555,0,0,1,3,1,1,0,0,8,0,0,8,8,0,0,16,8,0,0,24,8,0,0
|
||||
#VN_GYRO_CFG=1:555,40,16,1.0,40,16,1.0,40,16,1.0
|
||||
|
||||
#####################################################################################
|
||||
# VNW service batching configuration strings #
|
||||
# VNW provider will initialize default type as Time based batching #
|
||||
# Each service batch value is configured to be 100 #
|
||||
# VN_ACCEL_CFG_BATCH_VALUE will be treated as time in Ms if VN_CFG_BATCH_TYPE #
|
||||
# is set to time based batching #
|
||||
# VN_ACCEL_CFG_BATCH_VALUE will be treated as sample count if VN_CFG_BATCH_TYPE #
|
||||
# is set to count based batching #
|
||||
# Uncomment and update batch time /sample count as per selected batching type #
|
||||
#####################################################################################
|
||||
# Batching type
|
||||
# 1 - Time based (default)
|
||||
# 2 - Count based
|
||||
VN_CFG_BATCH_TYPE=1
|
||||
|
||||
#Vehicle Accel batching value, it can either accept time in milli seconds or sample count
|
||||
#VN_ACCEL_CFG_BATCH_VALUE=100
|
||||
|
||||
#Vehicle Gyro batching value, it can either accept time in milli seconds or sample count
|
||||
VN_GYRO_CFG_BATCH_VALUE=50
|
||||
|
||||
#Vehicle Odo batching value, it can either accept time in milli seconds or sample count
|
||||
#VN_ODOMETRY_CFG_BATCH_VALUE=100
|
||||
|
||||
#Vehicle Speed batching value, it can either accept time in milli seconds or sample count
|
||||
VN_SPEED_CFG_BATCH_VALUE=50
|
||||
|
||||
#Vehicle Gear batching value, it can either accept time in milli seconds or sample count
|
||||
VN_GEAR_CFG_BATCH_VALUE=50
|
||||
|
||||
#Vehicle DWS batching value, it can either accept time in milli seconds or sample count
|
||||
#VN_DWS_CFG_BATCH_VALUE=100
|
||||
####################################################################################
|
||||
|
||||
#Procesors clock ratio: AP and CAN bus microcontroller
|
||||
################################################
|
||||
# QDR3 configurations #
|
||||
################################################
|
||||
VN_PROC_CLOCK_RATIO=1.0
|
||||
|
||||
################################################
|
||||
# QDR2-DWT OR QDR2-Gyro configurations #
|
||||
################################################
|
||||
#VN_PROC_CLOCK_RATIO = 1.0
|
||||
|
||||
# Time source used by Sensor HAL
|
||||
# Setting this value controls accuracy of location sensor services.
|
||||
# 0 - Unknown
|
||||
# 1 - CLOCK_BOOTTIME
|
||||
# 2 - CLOCK_MONOTONIC
|
||||
# 3 - CLOCK_REALTIME
|
||||
# 4 - CLOCK_BOOTTIME using Alarm timer interface
|
||||
NDK_PROVIDER_TIME_SOURCE=1
|
||||
|
||||
# Sensor Batching Configuration
|
||||
# 0 - Time based
|
||||
# 1 - Fixed count based
|
||||
# 2 - Variable count based
|
||||
COUNT_BASED_BATCHING=1
|
||||
SYNC_ONCE=0
|
||||
|
||||
# Vehicle Network Data optimization
|
||||
# Default value: 0
|
||||
# Value 0x40000 - Speed(bit 18 eSLIM_SERVICE_VEHICLE_SPEED)
|
||||
# Value 0x80000 - Speed(bit 19 eSLIM_SERVICE_VEHICLE_DWS)
|
||||
# Value 0x100000 - Speed(bit 20 eSLIM_SERVICE_VEHICLE_GEAR)
|
||||
VN_ENABLE_DATA_OPTIMIZATION=0x100000
|
||||
|
||||
# Vehicle Network Data Routing time interval
|
||||
# This is applicable only if VN_ENABLE_DATA_OPTIMIZATION value is set
|
||||
# Default value: 5000 msec
|
||||
VN_DATA_ROUTING_TIME_INTERVAL_MSEC=3000
|
||||
|
||||
#Sensor HAL Provider Configuration HAL Library name including path
|
||||
################################################
|
||||
# #
|
||||
# Configuration for BMI 160 Sensor #
|
||||
# #
|
||||
################################################
|
||||
#SENSOR_TYPE=2
|
||||
#SENSOR_HAL_LIB_PATH=/usr/lib/libbmi160sensors.so.1
|
||||
|
||||
################################################
|
||||
# #
|
||||
# Configuration for ASM330 Sensor #
|
||||
# #
|
||||
################################################
|
||||
SENSOR_TYPE=1
|
||||
SENSOR_HAL_LIB_PATH=/usr/lib/libasm330sensors.so.1
|
||||
|
||||
|
||||
################################################
|
||||
# #
|
||||
# Configuration for IAM20680 Sensor #
|
||||
# #
|
||||
################################################
|
||||
#SENSOR_TYPE=3
|
||||
#SENSOR_HAL_LIB_PATH=/usr/lib/libiam20680sensors.so.1
|
||||
|
||||
|
||||
################################################
|
||||
# #
|
||||
# Configuration for SMI130 Sensor #
|
||||
# #
|
||||
################################################
|
||||
#SENSOR_TYPE=4
|
||||
#SENSOR_HAL_LIB_PATH=/usr/lib/libsmi130sensors.so.1
|
||||
Vendored
+333
@@ -0,0 +1,333 @@
|
||||
/* IPC Security Config */
|
||||
/* <GPS QMI Service ID - 16>:<GPS QMI Instance ID - all instances>:<Client Group ID> */
|
||||
16:4294967295:1000:1021:1026
|
||||
/* <QDMA QMI Service ID - 75>:<QDMA QMI Instance ID - all instances>:<Client Group ID> */
|
||||
75:4294967295:1000:1001:3006
|
||||
/* <LOWI QMI Service ID - 38>:<LOWI QMI Instance ID - all instances>:<Client Group ID> */
|
||||
56:4294967295:1021
|
||||
/* Allow SS CTL service to be used by system and net_raw processes */
|
||||
43:4294967295:1000:3004
|
||||
/* <UIMHTTP QMI Service ID - 16>:<UIMHTTP QMI Instance ID - all instances>:<Client Group ID> */
|
||||
71:4294967295:1001
|
||||
/* <UIMRMT QMI Service ID - 16>:<UIMRMT QMI Instance ID - all instances>:<Client Group ID> */
|
||||
50:4294967295:1001
|
||||
/* QMI-SLIM service permitted to gps and net_raw */
|
||||
55:4294967295:1021
|
||||
/* Allow Sensor services to be used by sensor process */
|
||||
256:4294967295:1000:1006:1013:1021:1047:3011
|
||||
257:4294967295:1000:1006:1013:1021:1047:3011
|
||||
258:4294967295:1000:1006:1013:1021:1047:3011
|
||||
259:4294967295:1000:1006:1013:1021:1047:3011
|
||||
260:4294967295:1000:1006:1013:1021:1047:3011
|
||||
261:4294967295:1000:1006:1013:1021:1047:3011
|
||||
262:4294967295:1000:1006:1013:1021:1047:3011
|
||||
263:4294967295:1000:1006:1013:1021:1047:3011
|
||||
264:4294967295:1000:1006:1013:1021:1047:3011
|
||||
265:4294967295:1000:1006:1013:1021:1047:3011
|
||||
266:4294967295:1000:1006:1013:1021:1047:3011
|
||||
267:4294967295:1000:1006:1013:1021:1047:3011
|
||||
268:4294967295:1000:1006:1013:1021:1047:3011
|
||||
269:4294967295:1000:1006:1013:1021:1047:3011
|
||||
270:4294967295:1000:1006:1013:1021:1047:3011
|
||||
271:4294967295:1000:1006:1013:1021:1047:3011
|
||||
272:4294967295:1000:1006:1013:1021:1047:3011
|
||||
273:4294967295:1000:1006:1013:1021:1047:3011
|
||||
274:4294967295:1000:1006:1013:1021:1047:3011
|
||||
275:4294967295:1000:1006:1013:1021:1047:3011
|
||||
276:4294967295:1000:1006:1013:1021:1047:3011
|
||||
277:4294967295:1000:1006:1013:1021:1047:3011
|
||||
278:4294967295:1000:1006:1013:1021:1047:3011
|
||||
279:4294967295:1000:1006:1013:1021:1047:3011
|
||||
280:4294967295:1000:1006:1013:1021:1047:3011
|
||||
281:4294967295:1000:1006:1013:1021:1047:3011
|
||||
282:4294967295:1000:1006:1013:1021:1047:3011
|
||||
283:4294967295:1000:1006:1013:1021:1047:3011
|
||||
284:4294967295:1000:1006:1013:1021:1047:3011
|
||||
285:4294967295:1000:1006:1013:1021:1047:3011
|
||||
286:4294967295:1000:1006:1013:1021:1047:3011
|
||||
287:4294967295:1000:1006:1013:1021:1047:3011
|
||||
288:4294967295:1000:1006:1013:1021:1047:3011
|
||||
289:4294967295:1000:1006:1013:1021:1047:3011
|
||||
290:4294967295:1000:1006:1013:1021:1047:3011
|
||||
291:4294967295:1000:1006:1013:1021:1047:3011
|
||||
292:4294967295:1000:1006:1013:1021:1047:3011
|
||||
293:4294967295:1000:1006:1013:1021:1047:3011
|
||||
294:4294967295:1000:1006:1013:1021:1047:3011
|
||||
295:4294967295:1000:1006:1013:1021:1047:3011
|
||||
296:4294967295:1000:1006:1013:1021:1047:3011
|
||||
297:4294967295:1000:1006:1013:1021:1047:3011
|
||||
298:4294967295:1000:1006:1013:1021:1047:3011
|
||||
299:4294967295:1000:1006:1013:1021:1047:3011
|
||||
300:4294967295:1000:1006:1013:1021:1047:3011
|
||||
301:4294967295:1000:1006:1013:1021:1047:3011
|
||||
302:4294967295:1000:1006:1013:1021:1047:3011
|
||||
303:4294967295:1000:1006:1013:1021:1047:3011
|
||||
304:4294967295:1000:1006:1013:1021:1047:3011
|
||||
305:4294967295:1000:1006:1013:1021:1047:3011
|
||||
306:4294967295:1000:1006:1013:1021:1047:3011
|
||||
307:4294967295:1000:1006:1013:1021:1047:3011
|
||||
308:4294967295:1000:1006:1013:1021:1047:3011
|
||||
309:4294967295:1000:1006:1013:1021:1047:3011
|
||||
310:4294967295:1000:1006:1013:1021:1047:3011
|
||||
311:4294967295:1000:1006:1013:1021:1047:3011
|
||||
312:4294967295:1000:1006:1013:1021:1047:3011
|
||||
313:4294967295:1000:1006:1013:1021:1047:3011
|
||||
314:4294967295:1000:1006:1013:1021:1047:3011
|
||||
315:4294967295:1000:1006:1013:1021:1047:3011
|
||||
316:4294967295:1000:1006:1013:1021:1047:3011
|
||||
317:4294967295:1000:1006:1013:1021:1047:3011
|
||||
318:4294967295:1000:1006:1013:1021:1047:3011
|
||||
319:4294967295:1000:1006:1013:1021:1047:3011
|
||||
320:4294967295:1000:1006:1013:1021:1047:3011
|
||||
321:4294967295:1000:1006:1013:1021:1047:3011
|
||||
322:4294967295:1000:1006:1013:1021:1047:3011
|
||||
323:4294967295:1000:1006:1013:1021:1047:3011
|
||||
324:4294967295:1000:1006:1013:1021:1047:3011
|
||||
325:4294967295:1000:1006:1013:1021:1047:3011
|
||||
326:4294967295:1000:1006:1013:1021:1047:3011
|
||||
327:4294967295:1000:1006:1013:1021:1047:3011
|
||||
328:4294967295:1000:1006:1013:1021:1047:3011
|
||||
329:4294967295:1000:1006:1013:1021:1047:3011
|
||||
330:4294967295:1000:1006:1013:1021:1047:3011
|
||||
331:4294967295:1000:1006:1013:1021:1047:3011
|
||||
332:4294967295:1000:1006:1013:1021:1047:3011
|
||||
333:4294967295:1000:1006:1013:1021:1047:3011
|
||||
334:4294967295:1000:1006:1013:1021:1047:3011
|
||||
335:4294967295:1000:1006:1013:1021:1047:3011
|
||||
336:4294967295:1000:1006:1013:1021:1047:3011
|
||||
337:4294967295:1000:1006:1013:1021:1047:3011
|
||||
338:4294967295:1000:1006:1013:1021:1047:3011
|
||||
339:4294967295:1000:1006:1013:1021:1047:3011
|
||||
340:4294967295:1000:1006:1013:1021:1047:3011
|
||||
341:4294967295:1000:1006:1013:1021:1047:3011
|
||||
342:4294967295:1000:1006:1013:1021:1047:3011
|
||||
343:4294967295:1000:1006:1013:1021:1047:3011
|
||||
344:4294967295:1000:1006:1013:1021:1047:3011
|
||||
345:4294967295:1000:1006:1013:1021:1047:3011
|
||||
346:4294967295:1000:1006:1013:1021:1047:3011
|
||||
347:4294967295:1000:1006:1013:1021:1047:3011
|
||||
348:4294967295:1000:1006:1013:1021:1047:3011
|
||||
349:4294967295:1000:1006:1013:1021:1047:3011
|
||||
350:4294967295:1000:1006:1013:1021:1047:3011
|
||||
351:4294967295:1000:1006:1013:1021:1047:3011
|
||||
352:4294967295:1000:1006:1013:1021:1047:3011
|
||||
353:4294967295:1000:1006:1013:1021:1047:3011
|
||||
354:4294967295:1000:1006:1013:1021:1047:3011
|
||||
355:4294967295:1000:1006:1013:1021:1047:3011
|
||||
356:4294967295:1000:1006:1013:1021:1047:3011
|
||||
357:4294967295:1000:1006:1013:1021:1047:3011
|
||||
358:4294967295:1000:1006:1013:1021:1047:3011
|
||||
359:4294967295:1000:1006:1013:1021:1047:3011
|
||||
360:4294967295:1000:1006:1013:1021:1047:3011
|
||||
361:4294967295:1000:1006:1013:1021:1047:3011
|
||||
362:4294967295:1000:1006:1013:1021:1047:3011
|
||||
363:4294967295:1000:1006:1013:1021:1047:3011
|
||||
364:4294967295:1000:1006:1013:1021:1047:3011
|
||||
365:4294967295:1000:1006:1013:1021:1047:3011
|
||||
366:4294967295:1000:1006:1013:1021:1047:3011
|
||||
367:4294967295:1000:1006:1013:1021:1047:3011
|
||||
368:4294967295:1000:1006:1013:1021:1047:3011
|
||||
369:4294967295:1000:1006:1013:1021:1047:3011
|
||||
370:4294967295:1000:1006:1013:1021:1047:3011
|
||||
371:4294967295:1000:1006:1013:1021:1047:3011
|
||||
372:4294967295:1000:1006:1013:1021:1047:3011
|
||||
373:4294967295:1000:1006:1013:1021:1047:3011
|
||||
374:4294967295:1000:1006:1013:1021:1047:3011
|
||||
375:4294967295:1000:1006:1013:1021:1047:3011
|
||||
376:4294967295:1000:1006:1013:1021:1047:3011
|
||||
377:4294967295:1000:1006:1013:1021:1047:3011
|
||||
378:4294967295:1000:1006:1013:1021:1047:3011
|
||||
379:4294967295:1000:1006:1013:1021:1047:3011
|
||||
380:4294967295:1000:1006:1013:1021:1047:3011
|
||||
381:4294967295:1000:1006:1013:1021:1047:3011
|
||||
382:4294967295:1000:1006:1013:1021:1047:3011
|
||||
383:4294967295:1000:1006:1013:1021:1047:3011
|
||||
384:4294967295:1000:1006:1013:1021:1047:3011
|
||||
385:4294967295:1000:1006:1013:1021:1047:3011
|
||||
386:4294967295:1000:1006:1013:1021:1047:3011
|
||||
387:4294967295:1000:1006:1013:1021:1047:3011
|
||||
388:4294967295:1000:1006:1013:1021:1047:3011
|
||||
389:4294967295:1000:1006:1013:1021:1047:3011
|
||||
390:4294967295:1000:1006:1013:1021:1047:3011
|
||||
391:4294967295:1000:1006:1013:1021:1047:3011
|
||||
392:4294967295:1000:1006:1013:1021:1047:3011
|
||||
393:4294967295:1000:1006:1013:1021:1047:3011
|
||||
394:4294967295:1000:1006:1013:1021:1047:3011
|
||||
395:4294967295:1000:1006:1013:1021:1047:3011
|
||||
396:4294967295:1000:1006:1013:1021:1047:3011
|
||||
397:4294967295:1000:1006:1013:1021:1047:3011
|
||||
398:4294967295:1000:1006:1013:1021:1047:3011
|
||||
399:4294967295:1000:1006:1013:1021:1047:3011
|
||||
400:4294967295:1000:1006:1013:1021:1047:3011
|
||||
401:4294967295:1000:1006:1013:1021:1047:3011
|
||||
402:4294967295:1000:1006:1013:1021:1047:3011
|
||||
403:4294967295:1000:1006:1013:1021:1047:3011
|
||||
404:4294967295:1000:1006:1013:1021:1047:3011
|
||||
405:4294967295:1000:1006:1013:1021:1047:3011
|
||||
406:4294967295:1000:1006:1013:1021:1047:3011
|
||||
407:4294967295:1000:1006:1013:1021:1047:3011
|
||||
408:4294967295:1000:1006:1013:1021:1047:3011
|
||||
409:4294967295:1000:1006:1013:1021:1047:3011
|
||||
410:4294967295:1000:1006:1013:1021:1047:3011
|
||||
411:4294967295:1000:1006:1013:1021:1047:3011
|
||||
412:4294967295:1000:1006:1013:1021:1047:3011
|
||||
413:4294967295:1000:1006:1013:1021:1047:3011
|
||||
414:4294967295:1000:1006:1013:1021:1047:3011
|
||||
415:4294967295:1000:1006:1013:1021:1047:3011
|
||||
416:4294967295:1000:1006:1013:1021:1047:3011
|
||||
417:4294967295:1000:1006:1013:1021:1047:3011
|
||||
418:4294967295:1000:1006:1013:1021:1047:3011
|
||||
419:4294967295:1000:1006:1013:1021:1047:3011
|
||||
420:4294967295:1000:1006:1013:1021:1047:3011
|
||||
421:4294967295:1000:1006:1013:1021:1047:3011
|
||||
422:4294967295:1000:1006:1013:1021:1047:3011
|
||||
423:4294967295:1000:1006:1013:1021:1047:3011
|
||||
424:4294967295:1000:1006:1013:1021:1047:3011
|
||||
425:4294967295:1000:1006:1013:1021:1047:3011
|
||||
426:4294967295:1000:1006:1013:1021:1047:3011
|
||||
427:4294967295:1000:1006:1013:1021:1047:3011
|
||||
428:4294967295:1000:1006:1013:1021:1047:3011
|
||||
429:4294967295:1000:1006:1013:1021:1047:3011
|
||||
430:4294967295:1000:1006:1013:1021:1047:3011
|
||||
431:4294967295:1000:1006:1013:1021:1047:3011
|
||||
432:4294967295:1000:1006:1013:1021:1047:3011
|
||||
433:4294967295:1000:1006:1013:1021:1047:3011
|
||||
434:4294967295:1000:1006:1013:1021:1047:3011
|
||||
435:4294967295:1000:1006:1013:1021:1047:3011
|
||||
436:4294967295:1000:1006:1013:1021:1047:3011
|
||||
437:4294967295:1000:1006:1013:1021:1047:3011
|
||||
438:4294967295:1000:1006:1013:1021:1047:3011
|
||||
439:4294967295:1000:1006:1013:1021:1047:3011
|
||||
440:4294967295:1000:1006:1013:1021:1047:3011
|
||||
441:4294967295:1000:1006:1013:1021:1047:3011
|
||||
442:4294967295:1000:1006:1013:1021:1047:3011
|
||||
443:4294967295:1000:1006:1013:1021:1047:3011
|
||||
444:4294967295:1000:1006:1013:1021:1047:3011
|
||||
445:4294967295:1000:1006:1013:1021:1047:3011
|
||||
446:4294967295:1000:1006:1013:1021:1047:3011
|
||||
447:4294967295:1000:1006:1013:1021:1047:3011
|
||||
448:4294967295:1000:1006:1013:1021:1047:3011
|
||||
449:4294967295:1000:1006:1013:1021:1047:3011
|
||||
450:4294967295:1000:1006:1013:1021:1047:3011
|
||||
451:4294967295:1000:1006:1013:1021:1047:3011
|
||||
452:4294967295:1000:1006:1013:1021:1047:3011
|
||||
453:4294967295:1000:1006:1013:1021:1047:3011
|
||||
454:4294967295:1000:1006:1013:1021:1047:3011
|
||||
455:4294967295:1000:1006:1013:1021:1047:3011
|
||||
456:4294967295:1000:1006:1013:1021:1047:3011
|
||||
457:4294967295:1000:1006:1013:1021:1047:3011
|
||||
458:4294967295:1000:1006:1013:1021:1047:3011
|
||||
459:4294967295:1000:1006:1013:1021:1047:3011
|
||||
460:4294967295:1000:1006:1013:1021:1047:3011
|
||||
461:4294967295:1000:1006:1013:1021:1047:3011
|
||||
462:4294967295:1000:1006:1013:1021:1047:3011
|
||||
463:4294967295:1000:1006:1013:1021:1047:3011
|
||||
464:4294967295:1000:1006:1013:1021:1047:3011
|
||||
465:4294967295:1000:1006:1013:1021:1047:3011
|
||||
466:4294967295:1000:1006:1013:1021:1047:3011
|
||||
467:4294967295:1000:1006:1013:1021:1047:3011
|
||||
468:4294967295:1000:1006:1013:1021:1047:3011
|
||||
469:4294967295:1000:1006:1013:1021:1047:3011
|
||||
470:4294967295:1000:1006:1013:1021:1047:3011
|
||||
471:4294967295:1000:1006:1013:1021:1047:3011
|
||||
472:4294967295:1000:1006:1013:1021:1047:3011
|
||||
473:4294967295:1000:1006:1013:1021:1047:3011
|
||||
474:4294967295:1000:1006:1013:1021:1047:3011
|
||||
475:4294967295:1000:1006:1013:1021:1047:3011
|
||||
476:4294967295:1000:1006:1013:1021:1047:3011
|
||||
477:4294967295:1000:1006:1013:1021:1047:3011
|
||||
478:4294967295:1000:1006:1013:1021:1047:3011
|
||||
479:4294967295:1000:1006:1013:1021:1047:3011
|
||||
480:4294967295:1000:1006:1013:1021:1047:3011
|
||||
481:4294967295:1000:1006:1013:1021:1047:3011
|
||||
482:4294967295:1000:1006:1013:1021:1047:3011
|
||||
483:4294967295:1000:1006:1013:1021:1047:3011
|
||||
484:4294967295:1000:1006:1013:1021:1047:3011
|
||||
485:4294967295:1000:1006:1013:1021:1047:3011
|
||||
486:4294967295:1000:1006:1013:1021:1047:3011
|
||||
487:4294967295:1000:1006:1013:1021:1047:3011
|
||||
488:4294967295:1000:1006:1013:1021:1047:3011
|
||||
489:4294967295:1000:1006:1013:1021:1047:3011
|
||||
490:4294967295:1000:1006:1013:1021:1047:3011
|
||||
491:4294967295:1000:1006:1013:1021:1047:3011
|
||||
492:4294967295:1000:1006:1013:1021:1047:3011
|
||||
493:4294967295:1000:1006:1013:1021:1047:3011
|
||||
494:4294967295:1000:1006:1013:1021:1047:3011
|
||||
495:4294967295:1000:1006:1013:1021:1047:3011
|
||||
496:4294967295:1000:1006:1013:1021:1047:3011
|
||||
497:4294967295:1000:1006:1013:1021:1047:3011
|
||||
498:4294967295:1000:1006:1013:1021:1047:3011
|
||||
499:4294967295:1000:1006:1013:1021:1047:3011
|
||||
500:4294967295:1000:1006:1013:1021:1047:3011
|
||||
501:4294967295:1000:1006:1013:1021:1047:3011
|
||||
502:4294967295:1000:1006:1013:1021:1047:3011
|
||||
503:4294967295:1000:1006:1013:1021:1047:3011
|
||||
504:4294967295:1000:1006:1013:1021:1047:3011
|
||||
505:4294967295:1000:1006:1013:1021:1047:3011
|
||||
506:4294967295:1000:1006:1013:1021:1047:3011
|
||||
507:4294967295:1000:1006:1013:1021:1047:3011
|
||||
508:4294967295:1000:1006:1013:1021:1047:3011
|
||||
509:4294967295:1000:1006:1013:1021:1047:3011
|
||||
510:4294967295:1000:1006:1013:1021:1047:3011
|
||||
511:4294967295:1000:1006:1013:1021:1047:3011
|
||||
/* Allow RCS service to aquire net_raw permission */
|
||||
18:4294967295:1001:3004
|
||||
/* Allow RCS service to communicate to IMS QMI Priv Svc*/
|
||||
77:4294967295:1001:3003
|
||||
/* Allow RCS service to access QMI-IMSS service */
|
||||
18:4294967295:1001:3003
|
||||
/* Allow SSGQMIGD to communicate to SSGCCS service*/
|
||||
76:4294967295:1001
|
||||
/* Allow cnd to accquire netbind */
|
||||
18:4294967295:1000:3003
|
||||
/* Allow QMID service to aquire net_raw permission */
|
||||
3:4294967295:1001:1021:3004
|
||||
2:4294967295:1000:1001:3004
|
||||
42:4294967295:1001:3004
|
||||
18:4294967295:1001:3004
|
||||
9:4294967295:1001:3004
|
||||
1:4294967295:1001:3004:1000
|
||||
4:4294967295:1001:3004
|
||||
7:4294967295:1001:3004
|
||||
8:4294967295:1001:3004:1000
|
||||
68:4294967295:1001:3004
|
||||
/* DPM */
|
||||
47:4294967295:1001:3004
|
||||
/* Allow communication to some QMI services with radio privilages */
|
||||
/* Format is <Service id>:<all instances>:<radio> */
|
||||
/* PBM */
|
||||
12:4294967295:1001
|
||||
/* WMS */
|
||||
5:4294967295:1001
|
||||
/* IMS VT */
|
||||
32:4294967295:1001
|
||||
/* IMSP */
|
||||
31:4294967295:1001
|
||||
/* PDC */
|
||||
36:4294967295:1001
|
||||
/* SAR */
|
||||
17:4294967295:1001
|
||||
/* RFRPE */
|
||||
41:4294967295:1001
|
||||
/*UIM*/
|
||||
11:4294967295:1001
|
||||
/*CAT*/
|
||||
10:4294967295:1001
|
||||
/*IMSA*/
|
||||
33:4294967295:1001
|
||||
/* CSVT */
|
||||
29:4294967295:1001
|
||||
/*SERVREG_NOTIF*/
|
||||
64:4294967295:1001
|
||||
66:4294967295:1001
|
||||
73:4294967295:1001
|
||||
/*LTE*/
|
||||
70:4294967295:1001
|
||||
/* Allow Data dpmd to access QMI DFS */
|
||||
48:4294967295:1000:3004
|
||||
/* DIAG */
|
||||
4097:4294967295:2002:2950:3009:2901
|
||||
/* <WLFW QMI Service ID - 0x45>:<WLFW QMI Instance ID - all instances>:<Client Group ID> */
|
||||
69:4294967295:1000
|
||||
/* <WLPS QMI Service ID - 0x39>:<WLFW QMI Instance ID - all instances>:<Client Group ID> */
|
||||
57:4294967295:1000
|
||||
@@ -0,0 +1,68 @@
|
||||
# Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc
|
||||
#
|
||||
# Not a contribution.
|
||||
#
|
||||
# Copyright (C) 2018 The Android Open Source Project
|
||||
#
|
||||
# Licensed under the Apache License, Version 2.0 (the "License");
|
||||
# you may not use this file except in compliance with the License.
|
||||
# You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
# See the License for the specific language governing permissions and
|
||||
# limitations under the License.
|
||||
|
||||
mmap: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
munmap: 1
|
||||
getuid: 1
|
||||
writev: 1
|
||||
prctl: arg0 == PR_SET_VMA || arg0 == PR_GET_DUMPABLE
|
||||
mprotect: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
openat: 1
|
||||
futex: 1
|
||||
close: 1
|
||||
read: 1
|
||||
newfstatat: 1
|
||||
fstat: 1
|
||||
#ioctl: arg1 == BINDER_WRITE_READ || arg1 == BINDER_SET_MAX_THREADS || arg1 == BINDER_VERSION
|
||||
ioctl: 1
|
||||
mremap: 1
|
||||
readlinkat: 1
|
||||
pread64: 1
|
||||
fstatfs: 1
|
||||
rt_sigprocmask: 1
|
||||
faccessat: 1
|
||||
sendto: 1
|
||||
rt_sigaction: 1
|
||||
socket: arg0 == AF_UNIX || arg0 == AF_QIPCRTR
|
||||
recvfrom: 1
|
||||
getsockname: 1
|
||||
getdents64: 1
|
||||
fcntl: 1
|
||||
nanosleep: 1
|
||||
getrandom: 1
|
||||
clone: 1
|
||||
pipe2: 1
|
||||
exit_group: 1
|
||||
write: 1
|
||||
exit: 1
|
||||
getpid: 1
|
||||
sigaltstack: 1
|
||||
getrlimit: 1
|
||||
restart_syscall: 1
|
||||
setsockopt: 1
|
||||
sched_getscheduler: 1
|
||||
rt_sigreturn: 1
|
||||
execve: 1
|
||||
madvise: 1
|
||||
set_tid_address: 1
|
||||
connect: 1
|
||||
ppoll: 1
|
||||
clock_gettime: 1
|
||||
gettid: 1
|
||||
@@ -0,0 +1,89 @@
|
||||
###################################################################################################
|
||||
# Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
###################################################################################################
|
||||
#
|
||||
# Not a Contribution.
|
||||
#
|
||||
|
||||
# Copyright (C) 2019 The Android Open Source Project
|
||||
#
|
||||
# Licensed under the Apache License, Version 2.0 (the "License");
|
||||
# you may not use this file except in compliance with the License.
|
||||
# You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
# See the License for the specific language governing permissions and
|
||||
# limitations under the License.
|
||||
|
||||
futex: 1
|
||||
# ioctl calls are filtered via the selinux policy.
|
||||
ioctl: 1
|
||||
sched_yield: 1
|
||||
close: 1
|
||||
dup: 1
|
||||
ppoll: 1
|
||||
mprotect: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
mmap2: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
memfd_create: 1
|
||||
ftruncate: 1
|
||||
ftruncate64: 1
|
||||
|
||||
mremap: arg3 == 3
|
||||
munmap: 1
|
||||
prctl: 1
|
||||
getuid32: 1
|
||||
writev: 1
|
||||
sigaltstack: 1
|
||||
clone: 1
|
||||
exit: 1
|
||||
lseek: 1
|
||||
rt_sigprocmask: 1
|
||||
openat: 1
|
||||
open: 1
|
||||
fstat64: 1
|
||||
write: 1
|
||||
nanosleep: 1
|
||||
setpriority: 1
|
||||
set_tid_address: 1
|
||||
getdents64: 1
|
||||
readlinkat: 1
|
||||
readlink: 1
|
||||
read: 1
|
||||
pread64: 1
|
||||
fstatfs64: 1
|
||||
gettimeofday: 1
|
||||
faccessat: 1
|
||||
_llseek: 1
|
||||
fstatat64: 1
|
||||
ugetrlimit: 1
|
||||
exit_group: 1
|
||||
restart_syscall: 1
|
||||
rt_sigreturn: 1
|
||||
getrandom: 1
|
||||
madvise: 1
|
||||
|
||||
# crash dump policy additions
|
||||
sigreturn: 1
|
||||
clock_gettime: 1
|
||||
futex: 1
|
||||
getpid: 1
|
||||
gettid: 1
|
||||
pipe2: 1
|
||||
recvmsg: 1
|
||||
process_vm_readv: 1
|
||||
tgkill: 1
|
||||
rt_sigaction: 1
|
||||
rt_tgsigqueueinfo: 1
|
||||
#prctl: arg0 == PR_GET_NO_NEW_PRIVS || arg0 == 0x53564d41
|
||||
#mprotect: arg2 in 0x1|0x2
|
||||
#mmap2: arg2 in 0x1|0x2
|
||||
geteuid32: 1
|
||||
getgid32: 1
|
||||
getegid32: 1
|
||||
getgroups32: 1
|
||||
@@ -0,0 +1,9 @@
|
||||
# device specific syscalls
|
||||
pselect6: 1
|
||||
eventfd2: 1
|
||||
sendto: 1
|
||||
recvfrom: 1
|
||||
_llseek: 1
|
||||
sysinfo: 1
|
||||
getcwd: 1
|
||||
getdents64: 1
|
||||
@@ -0,0 +1,95 @@
|
||||
#Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
#All Rights Reserved.
|
||||
#Confidential and Proprietary - Qualcomm Technologies, Inc
|
||||
|
||||
#Not a contribution.
|
||||
|
||||
#Copyright (C) 2018 The Android Open Source Project
|
||||
|
||||
#"Licensed under the Apache License, Version 2.0 (the \"License\");"
|
||||
#you may not use this file except in compliance with the License.
|
||||
#You may obtain a copy of the License at
|
||||
|
||||
#http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
#Unless required by applicable law or agreed to in writing, software
|
||||
#"distributed under the License is distributed on an \"AS IS\" BASIS,"
|
||||
#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
#See the License for the specific language governing permissions and
|
||||
#limitations under the License.
|
||||
|
||||
mmap: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
munmap: 1
|
||||
mprotect: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
#prctl: arg0 == PR_SET_VMA || arg0 == PR_SET_NO_NEW_PRIVS || arg0 == PR_GET_DUMPABLE || arg0 == PR_SET_SECCOMP || arg0 == 0x37 /* PR_??? */
|
||||
prctl: 1
|
||||
read: 1
|
||||
openat: 1
|
||||
close: 1
|
||||
shutdown: 1
|
||||
kill: 1
|
||||
futex: 1
|
||||
fstat: 1
|
||||
gettimeofday: 1
|
||||
readlinkat: 1
|
||||
newfstatat: 1
|
||||
mremap: 1
|
||||
pread64: 1
|
||||
fstatfs: 1
|
||||
rt_sigaction: 1
|
||||
faccessat: 1
|
||||
socket: arg0 == AF_UNIX || arg0 == AF_QIPCRTR
|
||||
writev: 1
|
||||
connect: 1
|
||||
rt_sigprocmask: 1
|
||||
fcntl: 1
|
||||
sendto: 1
|
||||
getrandom: 1
|
||||
lseek: 1
|
||||
exit_group: 1
|
||||
rt_tgsigqueueinfo: 1
|
||||
write: 1
|
||||
exit: 1
|
||||
getpid: 1
|
||||
sigaltstack: 1
|
||||
recvmsg: 1
|
||||
dup: 1
|
||||
getrlimit: 1
|
||||
restart_syscall: 1
|
||||
clone: 1
|
||||
gettid: 1
|
||||
sched_getscheduler: 1
|
||||
ioctl: 1
|
||||
execve: 1
|
||||
getuid: 1
|
||||
madvise: 1
|
||||
set_tid_address: 1
|
||||
nanosleep: 1
|
||||
rt_sigreturn: 1
|
||||
rt_sigsuspend: 1
|
||||
setpriority: 1
|
||||
geteuid: 1
|
||||
getgid: 1
|
||||
getegid: 1
|
||||
getgroups: 1
|
||||
pipe2: 1
|
||||
setitimer: 1
|
||||
pselect6: 1
|
||||
getsockname: 1
|
||||
recvfrom: 1
|
||||
ppoll: 1
|
||||
socketpair: 1
|
||||
setsockopt: 1
|
||||
getsockopt: 1
|
||||
sendmsg: 1
|
||||
bind: 1
|
||||
timer_create: 1
|
||||
timer_settime: 1
|
||||
timer_delete: 1
|
||||
clock_gettime: 1
|
||||
sched_getaffinity: 1
|
||||
#crash dump policy addition
|
||||
socket: 1
|
||||
process_vm_readv: 1
|
||||
tgkill: 1
|
||||
|
||||
@@ -0,0 +1,79 @@
|
||||
# Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc
|
||||
#
|
||||
# Not a contribution.
|
||||
#
|
||||
# Copyright (C) 2018 The Android Open Source Project
|
||||
#
|
||||
# Licensed under the Apache License, Version 2.0 (the "License");
|
||||
# you may not use this file except in compliance with the License.
|
||||
# You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
# See the License for the specific language governing permissions and
|
||||
# limitations under the License.
|
||||
|
||||
mmap: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
munmap: 1
|
||||
mprotect: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
#prctl: arg0 == 0x37 /* PR_??? */ || arg0 == PR_SET_VMA || arg0 == PR_GET_DUMPABLE || arg0 == PR_SET_SECCOMP || arg0 == PR_CAP_AMBIENT || arg0 == PR_GET_NO_NEW_PRIVS || arg0 == PR_SET_DUMPABLE || arg0 == PR_GET_NAME || arg0 == PR_SET_PTRACER
|
||||
prctl: 1
|
||||
openat: 1
|
||||
read: 1
|
||||
futex: 1
|
||||
close: 1
|
||||
fstat: 1
|
||||
readlinkat: 1
|
||||
newfstatat: 1
|
||||
mremap: 1
|
||||
fstatfs: 1
|
||||
pread64: 1
|
||||
rt_sigprocmask: 1
|
||||
rt_sigaction: 1
|
||||
faccessat: 1
|
||||
#ioctl: arg1 == _IOC(_IOC_NONE
|
||||
ioctl: 1
|
||||
clock_gettime: 1
|
||||
getrandom: 1
|
||||
nanosleep: 1
|
||||
fcntl: 1
|
||||
getuid: 1
|
||||
sigaltstack: 1
|
||||
socket: arg0 == AF_QIPCRTR || arg0 == AF_UNIX
|
||||
writev: 1
|
||||
execve: 1
|
||||
getpid: 1
|
||||
set_tid_address: 1
|
||||
sched_getscheduler: 1
|
||||
sigaltstack: 1
|
||||
sched_getaffinity: 1
|
||||
connect: 1
|
||||
pipe2: 1
|
||||
clone: 1
|
||||
ppoll: 1
|
||||
restart_syscall: 1
|
||||
exit: 1
|
||||
exit_group: 1
|
||||
rt_sigreturn: 1
|
||||
rt_tgsigqueueinfo: 1
|
||||
getppid: 1
|
||||
dup: 1
|
||||
capget: 1
|
||||
capset: 1
|
||||
setsid: 1
|
||||
setitimer: 1
|
||||
ptrace: 1
|
||||
recvmsg: 1
|
||||
exit: 1
|
||||
restart_syscall: 1
|
||||
gettid: 1
|
||||
write: 1
|
||||
dup3: 1
|
||||
getdents64: 1
|
||||
getsockname: 1
|
||||
recvfrom: 1
|
||||
@@ -0,0 +1,63 @@
|
||||
# Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc
|
||||
#
|
||||
# Not a contribution.
|
||||
#
|
||||
# Copyright (C) 2018 The Android Open Source Project
|
||||
#
|
||||
# Licensed under the Apache License, Version 2.0 (the "License");
|
||||
# you may not use this file except in compliance with the License.
|
||||
# You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
# See the License for the specific language governing permissions and
|
||||
# limitations under the License.
|
||||
|
||||
mmap: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
munmap: 1
|
||||
#prctl: arg0 == PR_SET_VMA || arg0 == PR_GET_DUMPABLE || arg0 == 0x37
|
||||
mprotect: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
futex: 1
|
||||
read: 1
|
||||
openat: 1
|
||||
close: 1
|
||||
fstat: 1
|
||||
readlinkat: 1
|
||||
newfstatat: 1
|
||||
mremap: 1
|
||||
clock_gettime: 1
|
||||
pread64: 1
|
||||
fstatfs: 1
|
||||
rt_sigaction: 1
|
||||
faccessat: 1
|
||||
rt_sigprocmask: 1
|
||||
#ioctl: arg1 == TCGETS || arg1 == BINDER_WRITE_READ || arg1 == BINDER_SET_MAX_THREADS || arg1 == BINDER_VERSION
|
||||
ioctl: 1
|
||||
getrandom: 1
|
||||
fcntl: 1
|
||||
getuid: 1
|
||||
lseek: 1
|
||||
exit_group: 1
|
||||
sched_getaffinity: 1
|
||||
writev: 1
|
||||
exit: 1
|
||||
getpid: 1
|
||||
sigaltstack: 1
|
||||
getrlimit: 1
|
||||
restart_syscall: 1
|
||||
clone: 1
|
||||
sched_getscheduler: 1
|
||||
execve: 1
|
||||
socket: arg0 == AF_UNIX
|
||||
set_tid_address: 1
|
||||
rt_sigreturn: 1
|
||||
connect: 1
|
||||
gettid: 1
|
||||
setpriority: 1
|
||||
prctl: 1
|
||||
write: 1
|
||||
+19
@@ -0,0 +1,19 @@
|
||||
/********************************************************************
|
||||
Copyright (c) 2018-19 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
*********************************************************************/
|
||||
{
|
||||
"embedded_ta_images": [
|
||||
{ "name":"rtice"},
|
||||
{ "name":"qwes"},
|
||||
{ "name":"tzsc"}
|
||||
],
|
||||
"ta_images": [
|
||||
{ "path":"/vendor/firmware_mnt/image/qwes.mbn"},
|
||||
{ "path":"/vendor/firmware/image/qwes.mbn"},
|
||||
{ "path":"/vendor/firmware_mnt/image/haventkn.mbn"},
|
||||
{ "path":"/vendor/firmware/image/haventkn.mbn"},
|
||||
{ "path":"/vendor/firmware_mnt/image/tzsc.mbn"}
|
||||
]
|
||||
}
|
||||
+34
@@ -0,0 +1,34 @@
|
||||
/********************************************************************
|
||||
Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
*********************************************************************/
|
||||
|
||||
/*
|
||||
* Configure class Ids available to third-party apps that try to
|
||||
* communicate with TZ. The rules defined here are used by
|
||||
* com.qualcomm.qti.qms.service.TrustZoneAccess to determine
|
||||
* what classes are available to clients.
|
||||
*
|
||||
* For Example -
|
||||
* { "classId":"80", "name":"I Need Location TA", "permissions":[ "android.permission.ACCESS_FINE_LOCATION" ] },
|
||||
* classId: The class ID that a TA is assigned.
|
||||
* name: The name of that TA. This is only a placeholder for now.
|
||||
* permissions: A list of Android permissions that a client must have to use this TA.
|
||||
*/
|
||||
|
||||
|
||||
{
|
||||
"whitelist": [
|
||||
{ "classId":"3", "name":"App Loader", "permissions":[] },
|
||||
{ "classId":"34", "name":"PVC License", "permissions":[] },
|
||||
{ "classId":"62", "name":"Device Attestation", "permissions":[] },
|
||||
{ "classId":"78", "name":"Haven Token", "permissions":[] },
|
||||
{ "classId":"70", "name":"RTIC App", "permissions":[] },
|
||||
{ "classId":"71", "name":"RTICe App", "permissions":[] },
|
||||
{ "classId":"101", "name":"Celluar Security Measures", "permissions":[] },
|
||||
{ "classId":"102", "name":"SCPassThrough", "permissions":[] },
|
||||
{ "classId":"119", "name":"Platform Feature Management", "permissions":[] },
|
||||
{ "classId":"146", "name":"TLOC Service", "permissions":[] }
|
||||
]
|
||||
}
|
||||
+36
@@ -0,0 +1,36 @@
|
||||
<!-- Copyright (c) 2020, The Linux Foundation. All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions are
|
||||
met:
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
* Redistributions in binary form must reproduce the above
|
||||
copyright notice, this list of conditions and the following
|
||||
disclaimer in the documentation and/or other materials provided
|
||||
with the distribution.
|
||||
* Neither the name of The Linux Foundation nor the names of its
|
||||
contributors may be used to endorse or promote products derived
|
||||
from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
-->
|
||||
<manifest version="1.0" type="device">
|
||||
<hal format="hidl">
|
||||
<name>android.hardware.gnss</name>
|
||||
<transport>hwbinder</transport>
|
||||
<fqname>@1.1::IGnss/default</fqname>
|
||||
<fqname>@2.1::IGnss/default</fqname>
|
||||
</hal>
|
||||
</manifest>
|
||||
|
||||
+14
@@ -0,0 +1,14 @@
|
||||
<!--
|
||||
Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
-->
|
||||
<manifest version="1.0" type="device">
|
||||
<hal format="hidl">
|
||||
<name>android.hardware.neuralnetworks</name>
|
||||
<transport>hwbinder</transport>
|
||||
<fqname>@1.3::IDevice/qti-default</fqname>
|
||||
<fqname>@1.3::IDevice/qti-dsp</fqname>
|
||||
<fqname>@1.3::IDevice/qti-gpu</fqname>
|
||||
</hal>
|
||||
</manifest>
|
||||
Vendored
+23
@@ -0,0 +1,23 @@
|
||||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!-- Copyright (C) 2019 The Android Open Source Project
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
-->
|
||||
<manifest version="1.0" type="device">
|
||||
<hal format="hidl">
|
||||
<name>android.hardware.drm</name>
|
||||
<transport>hwbinder</transport>
|
||||
<fqname>@1.3::ICryptoFactory/widevine</fqname>
|
||||
<fqname>@1.3::IDrmFactory/widevine</fqname>
|
||||
</hal>
|
||||
</manifest>
|
||||
@@ -0,0 +1,19 @@
|
||||
<!-- Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
-->
|
||||
<manifest version="1.0" type="device">
|
||||
<hal format="hidl">
|
||||
<name>vendor.qti.gnss</name>
|
||||
<transport>hwbinder</transport>
|
||||
<fqname>@1.2::ILocHidlGnss/gnss_vendor</fqname>
|
||||
<fqname>@2.1::ILocHidlGnss/gnss_vendor</fqname>
|
||||
<fqname>@3.0::ILocHidlGnss/gnss_vendor</fqname>
|
||||
<fqname>@4.0::ILocHidlGnss/gnss_vendor</fqname>
|
||||
</hal>
|
||||
<hal format="hidl">
|
||||
<name>android.hardware.gnss</name>
|
||||
<transport>hwbinder</transport>
|
||||
<fqname>@1.0::IGnss/gnss_vendor</fqname>
|
||||
</hal>
|
||||
</manifest>
|
||||
BIN
Binary file not shown.
BIN
Binary file not shown.
+21
@@ -0,0 +1,21 @@
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDeTCCAmGgAwIBAgIJAKnFNzqHIGkmMA0GCSqGSIb3DQEBBQUAMGkxFzAVBgNV
|
||||
BAoTDlFVQUxDT01NLCBJbmMuMScwJQYDVQQLEx5DcnlwdG9ncmFwaGljIE9wZXJh
|
||||
dGlvbnMgR3JvdXAxJTAjBgNVBAMTHFhUUkEgQWRtbmluaXN0cmF0aXZlIFJvb3Qg
|
||||
djEwHhcNMTEwMzI0MjAwMzQ3WhcNMjYwMzIwMjAwMzQ3WjBpMRcwFQYDVQQKEw5R
|
||||
VUFMQ09NTSwgSW5jLjEnMCUGA1UECxMeQ3J5cHRvZ3JhcGhpYyBPcGVyYXRpb25z
|
||||
IEdyb3VwMSUwIwYDVQQDExxYVFJBIEFkbW5pbmlzdHJhdGl2ZSBSb290IHYxMIIB
|
||||
IDANBgkqhkiG9w0BAQEFAAOCAQ0AMIIBCAKCAQEAp97dbUn5CzvikZSpHOVkevx7
|
||||
NRAE5OPlyU3rbO1xCHextKpgpRCmGEXmpifN33Q4atSsf0QIoPiq9WtbYZsMU8DZ
|
||||
YrLuSFH6P9O9fVyqM0sZZpn97frLD7T+/n7r+PqSdoRJnrTD1kaP1iVJuZSaW+sc
|
||||
x8TIzCJDMf6qWP0zhizqIdFhb4EtgBkRkExUxsQ0xEmBETrbydSEo90be6wLkRgp
|
||||
AtU208ZKCGrGcNKCNSp9TDkwLn0V408HkQ+iNw4xWpNURWGEoN3h8hOz+O3M6L2S
|
||||
RxH21P4CnLj0Ag7FqA35JdUtoeSt8UUJnv9kgBh3X0r9oc20+uwlZTOuZW6SkQIB
|
||||
A6MmMCQwEgYDVR0TAQH/BAgwBgEB/wIBATAOBgNVHQ8BAf8EBAMCAYYwDQYJKoZI
|
||||
hvcNAQEFBQADggEBADkdmsCBpZG44cJafBzcp7zIM57/fme8LuxbF0f50CHH2FHR
|
||||
P+HOLZARqHBFID+D8+hIDu3FQrtZg/SRscO+dvGjdILcp77S0Qne1K9TLu16aMBg
|
||||
wgWmr4mIRG/upqF93qVBzO6ffGR6uHAE7XtP/sRcLG34TmIgTtXEWhDSJHvcjlcf
|
||||
kF7+kMLHUrRcj20MTggKkWkDkCB0jyG9rZB9s127mEZjEMkEeoXi33NvV8qO2ChE
|
||||
yKPPlpKQT7tXghS0WfK73fSNSmWaTmUlL8N9Rb50uA0rZdarNDYI7jqJSlGFgE2+
|
||||
usHoeIDFQK2C6Zha3diWlbs8F3foMXKIfFVhvxo=
|
||||
-----END CERTIFICATE-----
|
||||
Vendored
+78
@@ -0,0 +1,78 @@
|
||||
#GTP AP Project client core config file
|
||||
#
|
||||
#GENERAL DESCRIPTION
|
||||
#This is used by client core
|
||||
#
|
||||
#Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
|
||||
#All Rights Reserved.
|
||||
#Qualcomm Atheros Confidential and Proprietary.
|
||||
#
|
||||
#Copyright (c) 2017 Qualcomm Technologies, Inc.
|
||||
#All Rights Reserved.
|
||||
#Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
##############################################################################
|
||||
# non-IOT devices configuration items #
|
||||
# For non-IOT devices, configure below configuration items #
|
||||
# according to the app note: 80-NK218-1 and remove the configuration items #
|
||||
# in section of "IOT devices configuration items". #
|
||||
##############################################################################
|
||||
|
||||
# ASN URI v2 to be used by some GTP AP modules that
|
||||
# need to run with ASN URI v2 protocol.
|
||||
XT_SERVER_ROOT_URL = https://gtp1.izatcloud.net:443/uds/v2
|
||||
|
||||
# ASN URI v3 to be used by GTP AP modules that
|
||||
# can support ASN URI v3 protocol.
|
||||
XT_SERVER_ROOT_URL_V3 = https://gtp1.izatcloud.net:443/uds/v3
|
||||
|
||||
# size, in bytes, of the cache on device
|
||||
SIZE_BYTE_TOTAL_CACHE = 5000000
|
||||
|
||||
##############################################################################
|
||||
# IOT devices configuration items #
|
||||
# For IOT devices, configure below configuration items #
|
||||
# according to the app note and remove the configuration items in section of #
|
||||
# "non-IOT devices configuration items". #
|
||||
##############################################################################
|
||||
|
||||
# ASN URI v3 to be used by GTP AP modules that
|
||||
# can support ASN URI v3 protocol.
|
||||
# XT_SERVER_ROOT_URL_V3 = https://gtpma1.izatcloud.net:443/uds/v3
|
||||
|
||||
# 3: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed
|
||||
# for any GTP requests, instead notification is sent to Izat SDK.
|
||||
# WiFi crowdsourcing module is disabled.
|
||||
# 4: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed
|
||||
# for any GTP requests, instead notification is sent to Izat SDK.
|
||||
# WiFi crowdsourcing module is active, also accessed via Izat SDK.
|
||||
# GTP_AP_MODE = 4
|
||||
|
||||
# 1: MP cell features relies on GTP AP for either download or upload
|
||||
# 0: MP cell features does not rely on GTP AP
|
||||
# GTP_AP_NEEDED_BY_MP_CELL = 1
|
||||
|
||||
##############################################################################
|
||||
# Configuration items applicable to all devices #
|
||||
##############################################################################
|
||||
|
||||
# Log verbosity control for most of the GTP WiFi system, including native and
|
||||
# Java componenets
|
||||
# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5, ALL = 100
|
||||
DEBUG_GLOBAL_LOG_LEVEL = 2
|
||||
|
||||
# this is used at the server side to distinguish uploads from different maker/model
|
||||
# default "Qualcomm"
|
||||
OEM_ID_IN_REQUEST_TO_SERVER = "Qualcomm"
|
||||
|
||||
# this is used at the server side to distinguish uploads from different maker/model
|
||||
# default "UNKNOWN"
|
||||
MODEL_ID_IN_REQUEST_TO_SERVER = "UNKNOWN"
|
||||
|
||||
##############################################################################
|
||||
# Qualcomm Network Location Provider config #
|
||||
##############################################################################
|
||||
|
||||
# Accuracy Threshold for NLP position. Position exceeds thsi threshold will be filtered out.
|
||||
# Default is 25000 meters.
|
||||
LARGE_ACCURACY_THRESHOLD_TO_FILTER_NLP_POSITION = 25000
|
||||
Reference in New Issue
Block a user