sm8150-common: Initial import
* From vayu V14.0.1.0.TJUMIXM Change-Id: I17aa712045470cebae289a06b43848b18c389d90
This commit is contained in:
Sebastiano Barezzi
Vendored
+188
@@ -0,0 +1,188 @@
|
||||
# AP DR SENSOR Configuration file
|
||||
#
|
||||
# SENSOR_SERVICE options are one of below
|
||||
# accel,gyro,vehicle_accel,vehicle_gyro,pedometer,vehicle_odometry,accel_temp,
|
||||
# gyro_temp,baro,mag_calib,mag_uncalib,amd,rmd.
|
||||
#
|
||||
# SENSOR_PROVIDER options is one of -- default,native,ssc,samlite.
|
||||
#
|
||||
# SENSOR_RATE = 1~100 (Hz)
|
||||
#
|
||||
# SENSOR_SAMPLES = 1~N
|
||||
#
|
||||
# SENSOR_STATISTIC_ENABLED
|
||||
# bit 0: Diag Print Enabled
|
||||
# bit 1: Adb Print Enabled
|
||||
# SENSOR_STATISTIC_PRINT_COUNT
|
||||
# Skip Number of Print
|
||||
#
|
||||
# QDR_DYNAMIC_LOADING = 1~3
|
||||
# Configure QDR library to be loaded
|
||||
# 1: QDR3
|
||||
# 2: QDR2-GYRO
|
||||
# 3: QDR2-DWT
|
||||
#
|
||||
#
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR3 Configuration #
|
||||
# #
|
||||
# For QDR3, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
SENSOR_SERVICE = accel
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 10
|
||||
SENSOR_SAMPLES = 10
|
||||
#
|
||||
SENSOR_SERVICE = vehicle_speed
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 100
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
SENSOR_SERVICE = gyro
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 10
|
||||
SENSOR_SAMPLES = 10
|
||||
#
|
||||
SENSOR_SERVICE = vehicle_gear
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 100
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
SENSOR_SERVICE = accel_temp
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 1
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
QDR_DYNAMIC_LOADING = 1
|
||||
##Specify CAN sensor type: Valid Options: 14(ODO), 2(ODO_DWT), 3(ODO_DWS)
|
||||
QDR_CAN_TYPE = 14
|
||||
##Reporting offset before PPS boundary
|
||||
QDR_REPORTING_OFFSET = 20
|
||||
#
|
||||
##QDR_ENABLE_QG shall be set as 1
|
||||
QDR_ENABLE_QG = 1
|
||||
#GEAR Optimisation
|
||||
QG_GEAR_ON_CHANGE=1
|
||||
#
|
||||
|
||||
##Vehicle Sensor Configuration (CAN data availability)
|
||||
##QDR_VEH_SENSOR_CONFIG:
|
||||
## 0: VEHICLE_SENSOR_PRESENT - Vehicle Sensor is available (DEFAULT)
|
||||
## 1: VEHICLE_SENSOR_OPTIONAL - Vehicle Sensor may or may not be present.
|
||||
#QDR_VEH_SENSOR_CONFIG = 0
|
||||
|
||||
##Select Wheel set (E.g.: Front two wheels, Rear two wheels OR All four wheels)
|
||||
##To be used for differential wheel tick OR speed service.
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as
|
||||
##ODO_DWS(3) or ODO_DWT(2).
|
||||
##Value "0": Use Front two wheels
|
||||
##Value "1": Use Rear two wheels
|
||||
##Value "2": Use All four wheels
|
||||
#QG_DRIVE_WHEEL_FW_RW_AW = 2
|
||||
##Max Wheel tick value above which wheel tick rolls over
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
|
||||
#QG_DWT_MAX_WHEEL_TICK_COUNT = 255.0
|
||||
##Configure Wheel constant for DWT based below equation
|
||||
##(2 * pi * WHEEL_RADIUS / Pulses Per revolution)
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
|
||||
#QG_DWT_WHEEL_CONSTANT = 0.044
|
||||
#
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR2-DWT Configuration #
|
||||
# #
|
||||
# For QDR2-DWT, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_speed
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_dws
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gear
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#GNSS_POS_STATISTIC_ENABLED = 3
|
||||
#GNSS_POS_STATISTIC_PRNTCNT = 10
|
||||
#GNSS_MSR_STATISTIC_ENABLED = 3
|
||||
#GNSS_MSR_STATISTIC_PRNTCNT = 10
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
#QDR_DYNAMIC_LOADING = 3
|
||||
##Enable/disable sensor data flashback feature
|
||||
#QDR_FLASHBACK_ENABLED = 0
|
||||
##Enable/disable sensor data batching feature
|
||||
#QDR_BATCHING_ENABLED = 0
|
||||
##Reporting offset before PPS boundary
|
||||
#QDR_REPORTING_OFFSET = 20
|
||||
##Sensor dispatch threshold declaration
|
||||
#QDR_SENSDISPATCH_MS = 30
|
||||
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR2-GYRO Configuration #
|
||||
# #
|
||||
# For QDR2-GYRO, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_speed
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gyro
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gear
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
#QDR_DYNAMIC_LOADING = 2
|
||||
##Enable/disable sensor data flashback feature
|
||||
#QDR_FLASHBACK_ENABLED = 0
|
||||
##Enable/disable sensor data batching feature
|
||||
#QDR_BATCHING_ENABLED = 0
|
||||
##Reporting offset before PPS boundary
|
||||
#QDR_REPORTING_OFFSET = 20
|
||||
##Sensor dispatch threshold declaration
|
||||
#QDR_SENSDISPATCH_MS = 30
|
||||
#
|
||||
+551
@@ -0,0 +1,551 @@
|
||||
COG
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDeTCCAmGgAwIBAgIJAKnFNzqHIGkmMA0GCSqGSIb3DQEBBQUAMGkxFzAVBgNV
|
||||
BAoTDlFVQUxDT01NLCBJbmMuMScwJQYDVQQLEx5DcnlwdG9ncmFwaGljIE9wZXJh
|
||||
dGlvbnMgR3JvdXAxJTAjBgNVBAMTHFhUUkEgQWRtbmluaXN0cmF0aXZlIFJvb3Qg
|
||||
djEwHhcNMTEwMzI0MjAwMzQ3WhcNMjYwMzIwMjAwMzQ3WjBpMRcwFQYDVQQKEw5R
|
||||
VUFMQ09NTSwgSW5jLjEnMCUGA1UECxMeQ3J5cHRvZ3JhcGhpYyBPcGVyYXRpb25z
|
||||
IEdyb3VwMSUwIwYDVQQDExxYVFJBIEFkbW5pbmlzdHJhdGl2ZSBSb290IHYxMIIB
|
||||
IDANBgkqhkiG9w0BAQEFAAOCAQ0AMIIBCAKCAQEAp97dbUn5CzvikZSpHOVkevx7
|
||||
NRAE5OPlyU3rbO1xCHextKpgpRCmGEXmpifN33Q4atSsf0QIoPiq9WtbYZsMU8DZ
|
||||
YrLuSFH6P9O9fVyqM0sZZpn97frLD7T+/n7r+PqSdoRJnrTD1kaP1iVJuZSaW+sc
|
||||
x8TIzCJDMf6qWP0zhizqIdFhb4EtgBkRkExUxsQ0xEmBETrbydSEo90be6wLkRgp
|
||||
AtU208ZKCGrGcNKCNSp9TDkwLn0V408HkQ+iNw4xWpNURWGEoN3h8hOz+O3M6L2S
|
||||
RxH21P4CnLj0Ag7FqA35JdUtoeSt8UUJnv9kgBh3X0r9oc20+uwlZTOuZW6SkQIB
|
||||
A6MmMCQwEgYDVR0TAQH/BAgwBgEB/wIBATAOBgNVHQ8BAf8EBAMCAYYwDQYJKoZI
|
||||
hvcNAQEFBQADggEBADkdmsCBpZG44cJafBzcp7zIM57/fme8LuxbF0f50CHH2FHR
|
||||
P+HOLZARqHBFID+D8+hIDu3FQrtZg/SRscO+dvGjdILcp77S0Qne1K9TLu16aMBg
|
||||
wgWmr4mIRG/upqF93qVBzO6ffGR6uHAE7XtP/sRcLG34TmIgTtXEWhDSJHvcjlcf
|
||||
kF7+kMLHUrRcj20MTggKkWkDkCB0jyG9rZB9s127mEZjEMkEeoXi33NvV8qO2ChE
|
||||
yKPPlpKQT7tXghS0WfK73fSNSmWaTmUlL8N9Rb50uA0rZdarNDYI7jqJSlGFgE2+
|
||||
usHoeIDFQK2C6Zha3diWlbs8F3foMXKIfFVhvxo=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
Entrust.net Secure Server Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIE2DCCBEGgAwIBAgIEN0rSQzANBgkqhkiG9w0BAQUFADCBwzELMAkGA1UE
|
||||
BhMCVVMxFDASBgNVBAoTC0VudHJ1c3QubmV0MTswOQYDVQQLEzJ3d3cuZW50
|
||||
cnVzdC5uZXQvQ1BTIGluY29ycC4gYnkgcmVmLiAobGltaXRzIGxpYWIuKTEl
|
||||
MCMGA1UECxMcKGMpIDE5OTkgRW50cnVzdC5uZXQgTGltaXRlZDE6MDgGA1UE
|
||||
AxMxRW50cnVzdC5uZXQgU2VjdXJlIFNlcnZlciBDZXJ0aWZpY2F0aW9uIEF1
|
||||
dGhvcml0eTAeFw05OTA1MjUxNjA5NDBaFw0xOTA1MjUxNjM5NDBaMIHDMQsw
|
||||
CQYDVQQGEwJVUzEUMBIGA1UEChMLRW50cnVzdC5uZXQxOzA5BgNVBAsTMnd3
|
||||
dy5lbnRydXN0Lm5ldC9DUFMgaW5jb3JwLiBieSByZWYuIChsaW1pdHMgbGlh
|
||||
Yi4pMSUwIwYDVQQLExwoYykgMTk5OSBFbnRydXN0Lm5ldCBMaW1pdGVkMTow
|
||||
OAYDVQQDEzFFbnRydXN0Lm5ldCBTZWN1cmUgU2VydmVyIENlcnRpZmljYXRp
|
||||
b24gQXV0aG9yaXR5MIGdMA0GCSqGSIb3DQEBAQUAA4GLADCBhwKBgQDNKIM0
|
||||
VBuJ8w+vN5Ex/68xYMmo6LIQaO2f55M28Qpku0f1BBc/I0dNxScZgSYMVHIN
|
||||
iC3ZH5oSn7yzcdOAGT9HZnuMNSjSuQrfJNqc1lB5gXpa0zf3wkrYKZImZNHk
|
||||
mGw6AIr1NJtl+O3jEP/9uElY3KDegjlrgbEWGWG5VLbmQwIBA6OCAdcwggHT
|
||||
MBEGCWCGSAGG+EIBAQQEAwIABzCCARkGA1UdHwSCARAwggEMMIHeoIHboIHY
|
||||
pIHVMIHSMQswCQYDVQQGEwJVUzEUMBIGA1UEChMLRW50cnVzdC5uZXQxOzA5
|
||||
BgNVBAsTMnd3dy5lbnRydXN0Lm5ldC9DUFMgaW5jb3JwLiBieSByZWYuIChs
|
||||
aW1pdHMgbGlhYi4pMSUwIwYDVQQLExwoYykgMTk5OSBFbnRydXN0Lm5ldCBM
|
||||
aW1pdGVkMTowOAYDVQQDEzFFbnRydXN0Lm5ldCBTZWN1cmUgU2VydmVyIENl
|
||||
cnRpZmljYXRpb24gQXV0aG9yaXR5MQ0wCwYDVQQDEwRDUkwxMCmgJ6AlhiNo
|
||||
dHRwOi8vd3d3LmVudHJ1c3QubmV0L0NSTC9uZXQxLmNybDArBgNVHRAEJDAi
|
||||
gA8xOTk5MDUyNTE2MDk0MFqBDzIwMTkwNTI1MTYwOTQwWjALBgNVHQ8EBAMC
|
||||
AQYwHwYDVR0jBBgwFoAU8BdiE1U9s/8KAGv7UISX8+1i0BowHQYDVR0OBBYE
|
||||
FPAXYhNVPbP/CgBr+1CEl/PtYtAaMAwGA1UdEwQFMAMBAf8wGQYJKoZIhvZ9
|
||||
B0EABAwwChsEVjQuMAMCBJAwDQYJKoZIhvcNAQEFBQADgYEAkNwwAvpkdMKn
|
||||
CqV8IY00F6j7Rw7/JXyNEwr75Ji174z4xRAN95K+8cPV1ZVqBLssziY2Zcgx
|
||||
xufuP+NXdYR6Ee9GTxj005i7qIcyunL2POI9n9cd2cNgQ4xYDiKWL2KjLB+6
|
||||
rQXvqzJ4h6BUcxm1XAX5Uj5tLUUL9wqT6u0G+bI=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
Entrust Certification Authority (2048)
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEKjCCAxKgAwIBAgIEOGPe+DANBgkqhkiG9w0BAQUFADCBtDEUMBIGA1UEChMLRW50cnVzdC5u
|
||||
ZXQxQDA+BgNVBAsUN3d3dy5lbnRydXN0Lm5ldC9DUFNfMjA0OCBpbmNvcnAuIGJ5IHJlZi4gKGxp
|
||||
bWl0cyBsaWFiLikxJTAjBgNVBAsTHChjKSAxOTk5IEVudHJ1c3QubmV0IExpbWl0ZWQxMzAxBgNV
|
||||
BAMTKkVudHJ1c3QubmV0IENlcnRpZmljYXRpb24gQXV0aG9yaXR5ICgyMDQ4KTAeFw05OTEyMjQx
|
||||
NzUwNTFaFw0yOTA3MjQxNDE1MTJaMIG0MRQwEgYDVQQKEwtFbnRydXN0Lm5ldDFAMD4GA1UECxQ3
|
||||
d3d3LmVudHJ1c3QubmV0L0NQU18yMDQ4IGluY29ycC4gYnkgcmVmLiAobGltaXRzIGxpYWIuKTEl
|
||||
MCMGA1UECxMcKGMpIDE5OTkgRW50cnVzdC5uZXQgTGltaXRlZDEzMDEGA1UEAxMqRW50cnVzdC5u
|
||||
ZXQgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgKDIwNDgpMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8A
|
||||
MIIBCgKCAQEArU1LqRKGsuqjIAcVFmQqK0vRvwtKTY7tgHalZ7d4QMBzQshowNtTK91euHaYNZOL
|
||||
Gp18EzoOH1u3Hs/lJBQesYGpjX24zGtLA/ECDNyrpUAkAH90lKGdCCmziAv1h3edVc3kw37XamSr
|
||||
hRSGlVuXMlBvPci6Zgzj/L24ScF2iUkZ/cCovYmjZy/Gn7xxGWC4LeksyZB2ZnuU4q941mVTXTzW
|
||||
nLLPKQP5L6RQstRIzgUyVYr9smRMDuSYB3Xbf9+5CFVghTAp+XtIpGmG4zU/HoZdenoVve8AjhUi
|
||||
VBcAkCaTvA5JaJG/+EfTnZVCwQ5N328mz8MYIWJmQ3DW1cAH4QIDAQABo0IwQDAOBgNVHQ8BAf8E
|
||||
BAMCAQYwDwYDVR0TAQH/BAUwAwEB/zAdBgNVHQ4EFgQUVeSB0RGAvtiJuQijMfmhJAkWuXAwDQYJ
|
||||
KoZIhvcNAQEFBQADggEBADubj1abMOdTmXx6eadNl9cZlZD7Bh/KM3xGY4+WZiT6QBshJ8rmcnPy
|
||||
T/4xmf3IDExoU8aAghOY+rat2l098c5u9hURlIIM7j+VrxGrD9cv3h8Dj1csHsm7mhpElesYT6Yf
|
||||
zX1XEC+bBAlahLVu2B064dae0Wx5XnkcFMXj0EyTO2U87d89vqbllRrDtRnDvV5bu/8j72gZyxKT
|
||||
J1wDLW8w0B62GqzeWvfRqqgnpv55gcR5mTNXuhKwqeBCbJPKVt7+bYQLCIt+jerXmCHG8+c8eS9e
|
||||
nNFMFY3h7CI3zJpDC5fcgJCNs2ebb0gIFVbPv/ErfF6adulZkMV8gzURZVE=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
Entrust Root Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEkTCCA3mgAwIBAgIERWtQVDANBgkqhkiG9w0BAQUFADCBsDELMAkGA1UEBhMC
|
||||
VVMxFjAUBgNVBAoTDUVudHJ1c3QsIEluYy4xOTA3BgNVBAsTMHd3dy5lbnRydXN0
|
||||
Lm5ldC9DUFMgaXMgaW5jb3Jwb3JhdGVkIGJ5IHJlZmVyZW5jZTEfMB0GA1UECxMW
|
||||
KGMpIDIwMDYgRW50cnVzdCwgSW5jLjEtMCsGA1UEAxMkRW50cnVzdCBSb290IENl
|
||||
cnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTA2MTEyNzIwMjM0MloXDTI2MTEyNzIw
|
||||
NTM0MlowgbAxCzAJBgNVBAYTAlVTMRYwFAYDVQQKEw1FbnRydXN0LCBJbmMuMTkw
|
||||
NwYDVQQLEzB3d3cuZW50cnVzdC5uZXQvQ1BTIGlzIGluY29ycG9yYXRlZCBieSBy
|
||||
ZWZlcmVuY2UxHzAdBgNVBAsTFihjKSAyMDA2IEVudHJ1c3QsIEluYy4xLTArBgNV
|
||||
BAMTJEVudHJ1c3QgUm9vdCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCCASIwDQYJ
|
||||
KoZIhvcNAQEBBQADggEPADCCAQoCggEBALaVtkNC+sZtKm9I35RMOVcF7sN5EUFo
|
||||
Nu3s/poBj6E4KPz3EEZmLk0eGrEaTsbRwJWIsMn/MYszA9u3g3s+IIRe7bJWKKf4
|
||||
4LlAcTfFy0cOlypowCKVYhXbR9n10Cv/gkvJrT7eTNuQgFA/CYqEAOwwCj0Yzfv9
|
||||
KlmaI5UXLEWeH25DeW0MXJj+SKfFI0dcXv1u5x609mhF0YaDW6KKjbHjKYD+JXGI
|
||||
rb68j6xSlkuqUY3kEzEZ6E5Nn9uss2rVvDlUccp6en+Q3X0dgNmBu1kmwhH+5pPi
|
||||
94DkZfs0Nw4pgHBNrziGLp5/V6+eF67rHMsoIV+2HNjnogQi+dPa2MsCAwEAAaOB
|
||||
sDCBrTAOBgNVHQ8BAf8EBAMCAQYwDwYDVR0TAQH/BAUwAwEB/zArBgNVHRAEJDAi
|
||||
gA8yMDA2MTEyNzIwMjM0MlqBDzIwMjYxMTI3MjA1MzQyWjAfBgNVHSMEGDAWgBRo
|
||||
kORnpKZTgMeGZqTx90tD+4S9bTAdBgNVHQ4EFgQUaJDkZ6SmU4DHhmak8fdLQ/uE
|
||||
vW0wHQYJKoZIhvZ9B0EABBAwDhsIVjcuMTo0LjADAgSQMA0GCSqGSIb3DQEBBQUA
|
||||
A4IBAQCT1DCw1wMgKtD5Y+iRDAUgqV8ZyntyTtSx29CW+1RaGSwMCPeyvIWonX9t
|
||||
O1KzKtvn1ISMY/YPyyYBkVBs9F8U4pN0wBOeMDpQ47RgxRzwIkSNcUesyBrJ6Zua
|
||||
AGAT/3B+XxFNSRuzFVJ7yVTav52Vr2ua2J7p8eRDjeIRRDq/r72DQnNSi6q7pynP
|
||||
9WQcCk3RvKqsnyrQ/39/2n3qse0wJcGE2jTSW3iDVuycNsMm4hH2Z0kdkquM++v/
|
||||
eu6FSqdQgPCnXEqULl8FmTxSQeDNtGPPAUO6nIPcj2A781q0tHuu2guQOHXvgR1m
|
||||
0vdXcDazv/wor3ElhVsT/h5/WrQ8
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
|
||||
Entrust Root Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEPjCCAyagAwIBAgIESlOMKDANBgkqhkiG9w0BAQsFADCBvjELMAkGA1UEBhMC
|
||||
VVMxFjAUBgNVBAoTDUVudHJ1c3QsIEluYy4xKDAmBgNVBAsTH1NlZSB3d3cuZW50
|
||||
cnVzdC5uZXQvbGVnYWwtdGVybXMxOTA3BgNVBAsTMChjKSAyMDA5IEVudHJ1c3Qs
|
||||
IEluYy4gLSBmb3IgYXV0aG9yaXplZCB1c2Ugb25seTEyMDAGA1UEAxMpRW50cnVz
|
||||
dCBSb290IENlcnRpZmljYXRpb24gQXV0aG9yaXR5IC0gRzIwHhcNMDkwNzA3MTcy
|
||||
NTU0WhcNMzAxMjA3MTc1NTU0WjCBvjELMAkGA1UEBhMCVVMxFjAUBgNVBAoTDUVu
|
||||
dHJ1c3QsIEluYy4xKDAmBgNVBAsTH1NlZSB3d3cuZW50cnVzdC5uZXQvbGVnYWwt
|
||||
dGVybXMxOTA3BgNVBAsTMChjKSAyMDA5IEVudHJ1c3QsIEluYy4gLSBmb3IgYXV0
|
||||
aG9yaXplZCB1c2Ugb25seTEyMDAGA1UEAxMpRW50cnVzdCBSb290IENlcnRpZmlj
|
||||
YXRpb24gQXV0aG9yaXR5IC0gRzIwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEK
|
||||
AoIBAQC6hLZy254Ma+KZ6TABp3bqMriVQRrJ2mFOWHLP/vaCeb9zYQYKpSfYs1/T
|
||||
RU4cctZOMvJyig/3gxnQaoCAAEUesMfnmr8SVycco2gvCoe9amsOXmXzHHfV1IWN
|
||||
cCG0szLni6LVhjkCsbjSR87kyUnEO6fe+1R9V77w6G7CebI6C1XiUJgWMhNcL3hW
|
||||
wcKUs/Ja5CeanyTXxuzQmyWC48zCxEXFjJd6BmsqEZ+pCm5IO2/b1BEZQvePB7/1
|
||||
U1+cPvQXLOZprE4yTGJ36rfo5bs0vBmLrpxR57d+tVOxMyLlbc9wPBr64ptntoP0
|
||||
jaWvYkxN4FisZDQSA/i2jZRjJKRxAgMBAAGjQjBAMA4GA1UdDwEB/wQEAwIBBjAP
|
||||
BgNVHRMBAf8EBTADAQH/MB0GA1UdDgQWBBRqciZ60B7vfec7aVHUbI2fkBJmqzAN
|
||||
BgkqhkiG9w0BAQsFAAOCAQEAeZ8dlsa2eT8ijYfThwMEYGprmi5ZiXMRrEPR9RP/
|
||||
jTkrwPK9T3CMqS/qF8QLVJ7UG5aYMzyorWKiAHarWWluBh1+xLlEjZivEtRh2woZ
|
||||
Rkfz6/djwUAFQKXSt/S1mja/qYh2iARVBCuch38aNzx+LaUa2NSJXsq9rD1s2G2v
|
||||
1fN2D807iDginWyTmsQ9v4IbZT+mD12q/OWyFcq1rca8PdCE6OoGcrBNOTJ4vz4R
|
||||
nAuknZoh8/CbCzB428Hch0P+vGOaysXCHMnHjf87ElgI5rY97HosTvuDls4MPGmH
|
||||
VHOkc8KT/1EQrBVUAdj8BbGJoX90g5pJ19xOe4pIb4tF9g==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
|
||||
DigiCert Assured ID Root CA
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDtzCCAp+gAwIBAgIQDOfg5RfYRv6P5WD8G/AwOTANBgkqhkiG9w0BAQUFADBl
|
||||
MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
|
||||
d3cuZGlnaWNlcnQuY29tMSQwIgYDVQQDExtEaWdpQ2VydCBBc3N1cmVkIElEIFJv
|
||||
b3QgQ0EwHhcNMDYxMTEwMDAwMDAwWhcNMzExMTEwMDAwMDAwWjBlMQswCQYDVQQG
|
||||
EwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3d3cuZGlnaWNl
|
||||
cnQuY29tMSQwIgYDVQQDExtEaWdpQ2VydCBBc3N1cmVkIElEIFJvb3QgQ0EwggEi
|
||||
MA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCtDhXO5EOAXLGH87dg+XESpa7c
|
||||
JpSIqvTO9SA5KFhgDPiA2qkVlTJhPLWxKISKityfCgyDF3qPkKyK53lTXDGEKvYP
|
||||
mDI2dsze3Tyoou9q+yHyUmHfnyDXH+Kx2f4YZNISW1/5WBg1vEfNoTb5a3/UsDg+
|
||||
wRvDjDPZ2C8Y/igPs6eD1sNuRMBhNZYW/lmci3Zt1/GiSw0r/wty2p5g0I6QNcZ4
|
||||
VYcgoc/lbQrISXwxmDNsIumH0DJaoroTghHtORedmTpyoeb6pNnVFzF1roV9Iq4/
|
||||
AUaG9ih5yLHa5FcXxH4cDrC0kqZWs72yl+2qp/C3xag/lRbQ/6GW6whfGHdPAgMB
|
||||
AAGjYzBhMA4GA1UdDwEB/wQEAwIBhjAPBgNVHRMBAf8EBTADAQH/MB0GA1UdDgQW
|
||||
BBRF66Kv9JLLgjEtUYunpyGd823IDzAfBgNVHSMEGDAWgBRF66Kv9JLLgjEtUYun
|
||||
pyGd823IDzANBgkqhkiG9w0BAQUFAAOCAQEAog683+Lt8ONyc3pklL/3cmbYMuRC
|
||||
dWKuh+vy1dneVrOfzM4UKLkNl2BcEkxY5NM9g0lFWJc1aRqoR+pWxnmrEthngYTf
|
||||
fwk8lOa4JiwgvT2zKIn3X/8i4peEH+ll74fg38FnSbNd67IJKusm7Xi+fT8r87cm
|
||||
NW1fiQG2SVufAQWbqz0lwcy2f8Lxb4bG+mRo64EtlOtCt/qMHt1i8b5QZ7dsvfPx
|
||||
H2sMNgcWfzd8qVttevESRmCD1ycEvkvOl77DZypoEd+A5wwzZr8TDRRu838fYxAe
|
||||
+o0bJW1sj6W3YQGx0qMmoRBxna3iw/nDmVG3KwcIzi7mULKn+gpFL6Lw8g==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
DigiCert Global Root CA
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDrzCCApegAwIBAgIQCDvgVpBCRrGhdWrJWZHHSjANBgkqhkiG9w0BAQUFADBh
|
||||
MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
|
||||
d3cuZGlnaWNlcnQuY29tMSAwHgYDVQQDExdEaWdpQ2VydCBHbG9iYWwgUm9vdCBD
|
||||
QTAeFw0wNjExMTAwMDAwMDBaFw0zMTExMTAwMDAwMDBaMGExCzAJBgNVBAYTAlVT
|
||||
MRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMxGTAXBgNVBAsTEHd3dy5kaWdpY2VydC5j
|
||||
b20xIDAeBgNVBAMTF0RpZ2lDZXJ0IEdsb2JhbCBSb290IENBMIIBIjANBgkqhkiG
|
||||
9w0BAQEFAAOCAQ8AMIIBCgKCAQEA4jvhEXLeqKTTo1eqUKKPC3eQyaKl7hLOllsB
|
||||
CSDMAZOnTjC3U/dDxGkAV53ijSLdhwZAAIEJzs4bg7/fzTtxRuLWZscFs3YnFo97
|
||||
nh6Vfe63SKMI2tavegw5BmV/Sl0fvBf4q77uKNd0f3p4mVmFaG5cIzJLv07A6Fpt
|
||||
43C/dxC//AH2hdmoRBBYMql1GNXRor5H4idq9Joz+EkIYIvUX7Q6hL+hqkpMfT7P
|
||||
T19sdl6gSzeRntwi5m3OFBqOasv+zbMUZBfHWymeMr/y7vrTC0LUq7dBMtoM1O/4
|
||||
gdW7jVg/tRvoSSiicNoxBN33shbyTApOB6jtSj1etX+jkMOvJwIDAQABo2MwYTAO
|
||||
BgNVHQ8BAf8EBAMCAYYwDwYDVR0TAQH/BAUwAwEB/zAdBgNVHQ4EFgQUA95QNVbR
|
||||
TLtm8KPiGxvDl7I90VUwHwYDVR0jBBgwFoAUA95QNVbRTLtm8KPiGxvDl7I90VUw
|
||||
DQYJKoZIhvcNAQEFBQADggEBAMucN6pIExIK+t1EnE9SsPTfrgT1eXkIoyQY/Esr
|
||||
hMAtudXH/vTBH1jLuG2cenTnmCmrEbXjcKChzUyImZOMkXDiqw8cvpOp/2PV5Adg
|
||||
06O/nVsJ8dWO41P0jmP6P6fbtGbfYmbW0W5BjfIttep3Sp+dWOIrWcBAI+0tKIJF
|
||||
PnlUkiaY4IBIqDfv8NZ5YBberOgOzW6sRBc4L0na4UU+Krk2U886UAb3LujEV0ls
|
||||
YSEY1QSteDwsOoBrp+uvFRTp2InBuThs4pFsiv9kuXclVzDAGySj4dzp30d8tbQk
|
||||
CAUw7C29C79Fv1C5qfPrmAESrciIxpg0X40KPMbp1ZWVbd4=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
DigiCert High Assurance EV Root CA
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDxTCCAq2gAwIBAgIQAqxcJmoLQJuPC3nyrkYldzANBgkqhkiG9w0BAQUFADBs
|
||||
MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
|
||||
d3cuZGlnaWNlcnQuY29tMSswKQYDVQQDEyJEaWdpQ2VydCBIaWdoIEFzc3VyYW5j
|
||||
ZSBFViBSb290IENBMB4XDTA2MTExMDAwMDAwMFoXDTMxMTExMDAwMDAwMFowbDEL
|
||||
MAkGA1UEBhMCVVMxFTATBgNVBAoTDERpZ2lDZXJ0IEluYzEZMBcGA1UECxMQd3d3
|
||||
LmRpZ2ljZXJ0LmNvbTErMCkGA1UEAxMiRGlnaUNlcnQgSGlnaCBBc3N1cmFuY2Ug
|
||||
RVYgUm9vdCBDQTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMbM5XPm
|
||||
+9S75S0tMqbf5YE/yc0lSbZxKsPVlDRnogocsF9ppkCxxLeyj9CYpKlBWTrT3JTW
|
||||
PNt0OKRKzE0lgvdKpVMSOO7zSW1xkX5jtqumX8OkhPhPYlG++MXs2ziS4wblCJEM
|
||||
xChBVfvLWokVfnHoNb9Ncgk9vjo4UFt3MRuNs8ckRZqnrG0AFFoEt7oT61EKmEFB
|
||||
Ik5lYYeBQVCmeVyJ3hlKV9Uu5l0cUyx+mM0aBhakaHPQNAQTXKFx01p8VdteZOE3
|
||||
hzBWBOURtCmAEvF5OYiiAhF8J2a3iLd48soKqDirCmTCv2ZdlYTBoSUeh10aUAsg
|
||||
EsxBu24LUTi4S8sCAwEAAaNjMGEwDgYDVR0PAQH/BAQDAgGGMA8GA1UdEwEB/wQF
|
||||
MAMBAf8wHQYDVR0OBBYEFLE+w2kD+L9HAdSYJhoIAu9jZCvDMB8GA1UdIwQYMBaA
|
||||
FLE+w2kD+L9HAdSYJhoIAu9jZCvDMA0GCSqGSIb3DQEBBQUAA4IBAQAcGgaX3Nec
|
||||
nzyIZgYIVyHbIUf4KmeqvxgydkAQV8GK83rZEWWONfqe/EW1ntlMMUu4kehDLI6z
|
||||
eM7b41N5cdblIZQB2lWHmiRk9opmzN6cN82oNLFpmyPInngiK3BD41VHMWEZ71jF
|
||||
hS9OMPagMRYjyOfiZRYzy78aG6A9+MpeizGLYAiJLQwGXFK3xPkKmNEVX58Svnw2
|
||||
Yzi9RKR/5CYrCsSXaQ3pjOLAEFe4yHYSkVXySGnYvCoCWw9E1CAx2/S6cCZdkGCe
|
||||
vEsXCS+0yx5DaMkHJ8HSXPfqIbloEpw8nL+e/IBcm2PN7EeqJSdnoDfzAIJ9VNep
|
||||
+OkuE6N36B9K
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 1 Public Primary Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIICPTCCAaYCEQDNun9W8N/kvFT+IqyzcqpVMA0GCSqGSIb3DQEBAgUAMF8xCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xh
|
||||
c3MgMSBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05
|
||||
NjAxMjkwMDAwMDBaFw0yODA4MDEyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYD
|
||||
VQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMSBQdWJsaWMgUHJp
|
||||
bWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOB
|
||||
jQAwgYkCgYEA5Rm/baNWYS2ZSHH2Z965jeu3noaACpEO+jglr0aIguVzqKCbJF0N
|
||||
H8xlbgyw0FaEGIeaBpsQoXPftFg5a27B9hXVqKg/qhIGjTGsf7A01480Z4gJzRQR
|
||||
4k5FVmkfeAKA2txHkSm7NsljXMXg1y2He6G3MrB7MLoqLzGq7qNn2tsCAwEAATAN
|
||||
BgkqhkiG9w0BAQIFAAOBgQBMP7iLxmjf7kMzDl3ppssHhE16M/+SG/Q2rdiVIjZo
|
||||
EWx8QszznC7EBz8UsA9P/5CSdvnivErpj82ggAr3xSnxgiJduLHdgSOjeyUVRjB5
|
||||
FvjqBUuUfx3CHMjjt/QQQDwTw18fU+hI5Ia0e6E1sHslurjTjqs/OJ0ANACY89Fx
|
||||
lA==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 2 Public Primary Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIICPDCCAaUCEC0b/EoXjaOR6+f/9YtFvgswDQYJKoZIhvcNAQECBQAwXzELMAkG
|
||||
A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz
|
||||
cyAyIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2
|
||||
MDEyOTAwMDAwMFoXDTI4MDgwMTIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV
|
||||
BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAyIFB1YmxpYyBQcmlt
|
||||
YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN
|
||||
ADCBiQKBgQC2WoujDWojg4BrzzmH9CETMwZMJaLtVRKXxaeAufqDwSCg+i8VDXyh
|
||||
YGt+eSz6Bg86rvYbb7HS/y8oUl+DfUvEerf4Zh+AVPy3wo5ZShRXRtGak75BkQO7
|
||||
FYCTXOvnzAhsPz6zSvz/S2wj1VCCJkQZjiPDceoZJEcEnnW/yKYAHwIDAQABMA0G
|
||||
CSqGSIb3DQEBAgUAA4GBAIobK/o5wXTXXtgZZKJYSi034DNHD6zt96rbHuSLBlxg
|
||||
J8pFUs4W7z8GZOeUaHxgMxURaa+dYo2jA1Rrpr7l7gUYYAS/QoD90KioHgE796Nc
|
||||
r6Pc5iaAIzy4RHT3Cq5Ji2F4zCS/iIqnDupzGUH9TQPwiNHleI2lKk/2lw0Xd8rY
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIICPDCCAaUCEDyRMcsf9tAbDpq40ES/Er4wDQYJKoZIhvcNAQEFBQAwXzELMAkG
|
||||
A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz
|
||||
cyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2
|
||||
MDEyOTAwMDAwMFoXDTI4MDgwMjIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV
|
||||
BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmlt
|
||||
YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN
|
||||
ADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhE
|
||||
BarsAx94f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/is
|
||||
I19wKTakyYbnsZogy1Olhec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0G
|
||||
CSqGSIb3DQEBBQUAA4GBABByUqkFFBkyCEHwxWsKzH4PIRnN5GfcX6kb5sroc50i
|
||||
2JhucwNhkcV8sEVAbkSdjbCxlnRhLQ2pRdKkkirWmnWXbj9T/UWZYB2oK0z5XqcJ
|
||||
2HUw19JlYD1n1khVdWk/kfVIC0dpImmClr7JyDiGSnoscxlIaU5rfGW/D/xwzoiQ
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 1 Public Primary Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDAjCCAmsCEEzH6qqYPnHTkxD4PTqJkZIwDQYJKoZIhvcNAQEFBQAwgcExCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xh
|
||||
c3MgMSBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcy
|
||||
MTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3Jp
|
||||
emVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMB4X
|
||||
DTk4MDUxODAwMDAwMFoXDTI4MDgwMTIzNTk1OVowgcExCzAJBgNVBAYTAlVTMRcw
|
||||
FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgMSBQdWJsaWMg
|
||||
UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEo
|
||||
YykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5
|
||||
MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMIGfMA0GCSqGSIb3DQEB
|
||||
AQUAA4GNADCBiQKBgQCq0Lq+Fi24g9TK0g+8djHKlNgdk4xWArzZbxpvUjZudVYK
|
||||
VdPfQ4chEWWKfo+9Id5rMj8bhDSVBZ1BNeuS65bdqlk/AVNtmU/t5eIqWpDBucSm
|
||||
Fc/IReumXY6cPvBkJHalzasab7bYe1FhbqZ/h8jit+U03EGI6glAvnOSPWvndQID
|
||||
AQABMA0GCSqGSIb3DQEBBQUAA4GBAKlPww3HZ74sy9mozS11534Vnjty637rXC0J
|
||||
h9ZrbWB85a7FkCMMXErQr7Fd88e2CtvgFZMN3QO8x3aKtd1Pw5sTdbgBwObJW2ul
|
||||
uIncrKTdcu1OofdPvAbT6shkdHvClUGcZXNY8ZCaPGqxmMnEh7zPRW1F4m4iP/68
|
||||
DzFc6PLZ
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 2 Public Primary Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDAzCCAmwCEQC5L2DMiJ+hekYJuFtwbIqvMA0GCSqGSIb3DQEBBQUAMIHBMQsw
|
||||
CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xPDA6BgNVBAsTM0Ns
|
||||
YXNzIDIgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgLSBH
|
||||
MjE6MDgGA1UECxMxKGMpIDE5OTggVmVyaVNpZ24sIEluYy4gLSBGb3IgYXV0aG9y
|
||||
aXplZCB1c2Ugb25seTEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1c3QgTmV0d29yazAe
|
||||
Fw05ODA1MTgwMDAwMDBaFw0yODA4MDEyMzU5NTlaMIHBMQswCQYDVQQGEwJVUzEX
|
||||
MBUGA1UEChMOVmVyaVNpZ24sIEluYy4xPDA6BgNVBAsTM0NsYXNzIDIgUHVibGlj
|
||||
IFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgLSBHMjE6MDgGA1UECxMx
|
||||
KGMpIDE5OTggVmVyaVNpZ24sIEluYy4gLSBGb3IgYXV0aG9yaXplZCB1c2Ugb25s
|
||||
eTEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1c3QgTmV0d29yazCBnzANBgkqhkiG9w0B
|
||||
AQEFAAOBjQAwgYkCgYEAp4gBIXQs5xoD8JjhlzwPIQjxnNuX6Zr8wgQGE75fUsjM
|
||||
HiwSViy4AWkszJkfrbCWrnkE8hM5wXuYuggs6MKEEyyqaekJ9MepAqRCwiNPStjw
|
||||
DqL7MWzJ5m+ZJwf15vRMeJ5t60aG+rmGyVTyssSv1EYcWskVMP8NbPUtDm3Of3cC
|
||||
AwEAATANBgkqhkiG9w0BAQUFAAOBgQByLvl/0fFx+8Se9sVeUYpAmLho+Jscg9ji
|
||||
nb3/7aHmZuovCfTK1+qlK5X2JGCGTUQug6XELaDTrnhpb3LabK4I8GOSN+a7xDAX
|
||||
rXfMSTWqz9iP0b63GJZHc2pUIjRkLbYWm1lbtFFZOrMLFPQS32eg9K0yZF6xRnIn
|
||||
jBJ7xUS0rg==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDAjCCAmsCEH3Z/gfPqB63EHln+6eJNMYwDQYJKoZIhvcNAQEFBQAwgcExCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xh
|
||||
c3MgMyBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcy
|
||||
MTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3Jp
|
||||
emVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMB4X
|
||||
DTk4MDUxODAwMDAwMFoXDTI4MDgwMTIzNTk1OVowgcExCzAJBgNVBAYTAlVTMRcw
|
||||
FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgMyBQdWJsaWMg
|
||||
UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEo
|
||||
YykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5
|
||||
MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMIGfMA0GCSqGSIb3DQEB
|
||||
AQUAA4GNADCBiQKBgQDMXtERXVxp0KvTuWpMmR9ZmDCOFoUgRm1HP9SFIIThbbP4
|
||||
pO0M8RcPO/mn+SXXwc+EY/J8Y8+iR/LGWzOOZEAEaMGAuWQcRXfH2G71lSk8UOg0
|
||||
13gfqLptQ5GVj0VXXn7F+8qkBOvqlzdUMG+7AUcyM83cV5tkaWH4mx0ciU9cZwID
|
||||
AQABMA0GCSqGSIb3DQEBBQUAA4GBAFFNzb5cy5gZnBWyATl4Lk0PZ3BwmcYQWpSk
|
||||
U01UbSuvDV1Ai2TT1+7eVmGSX6bEHRBhNtMsJzzoKQm5EWR0zLVznxxIqbxhAe7i
|
||||
F6YM40AIOw7n60RzKprxaZLvcRTDOaxxp5EJb+RxBrO6WVcmeQD2+A2iMzAo1KpY
|
||||
oJ2daZH9
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 4 Public Primary Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDAjCCAmsCEDKIjprS9esTR/h/xCA3JfgwDQYJKoZIhvcNAQEFBQAwgcExCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xh
|
||||
c3MgNCBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcy
|
||||
MTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3Jp
|
||||
emVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMB4X
|
||||
DTk4MDUxODAwMDAwMFoXDTI4MDgwMTIzNTk1OVowgcExCzAJBgNVBAYTAlVTMRcw
|
||||
FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgNCBQdWJsaWMg
|
||||
UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEo
|
||||
YykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5
|
||||
MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMIGfMA0GCSqGSIb3DQEB
|
||||
AQUAA4GNADCBiQKBgQC68OTP+cSuhVS5B1f5j8V/aBH4xBewRNzjMHPVKmIquNDM
|
||||
HO0oW369atyzkSTKQWI8/AIBvxwWMZQFl3Zuoq29YRdsTjCG8FE3KlDHqGKB3FtK
|
||||
qsGgtG7rL+VXxbErQHDbWk2hjh+9Ax/YA9SPTJlxvOKCzFjomDqG04Y48wApHwID
|
||||
AQABMA0GCSqGSIb3DQEBBQUAA4GBAIWMEsGnuVAVess+rLhDityq3RS6iYF+ATwj
|
||||
cSGIL4LcY/oCRaxFWdcqWERbt5+BO5JoPeI3JPV7bI92NZYJqFmduc4jq3TWg/0y
|
||||
cyfYaT5DdPauxYma51N86Xv2S/PBZYPejYqcPIiNOVn8qj8ijaHBZlCBckztImRP
|
||||
T8qAkbYp
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
|
||||
VeriSign Class 1 Public Primary Certification Authority - G3
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEGjCCAwICEQCLW3VWhFSFCwDPrzhIzrGkMA0GCSqGSIb3DQEBBQUAMIHKMQsw
|
||||
CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZl
|
||||
cmlTaWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWdu
|
||||
LCBJbmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlT
|
||||
aWduIENsYXNzIDEgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
|
||||
dHkgLSBHMzAeFw05OTEwMDEwMDAwMDBaFw0zNjA3MTYyMzU5NTlaMIHKMQswCQYD
|
||||
VQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlT
|
||||
aWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWduLCBJ
|
||||
bmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlTaWdu
|
||||
IENsYXNzIDEgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkg
|
||||
LSBHMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAN2E1Lm0+afY8wR4
|
||||
nN493GwTFtl63SRRZsDHJlkNrAYIwpTRMx/wgzUfbhvI3qpuFU5UJ+/EbRrsC+MO
|
||||
8ESlV8dAWB6jRx9x7GD2bZTIGDnt/kIYVt/kTEkQeE4BdjVjEjbdZrwBBDajVWjV
|
||||
ojYJrKshJlQGrT/KFOCsyq0GHZXi+J3x4GD/wn91K0zM2v6HmSHquv4+VNfSWXjb
|
||||
PG7PoBMAGrgnoeS+Z5bKoMWznN3JdZ7rMJpfo83ZrngZPyPpXNspva1VyBtUjGP2
|
||||
6KbqxzcSXKMpHgLZ2x87tNcPVkeBFQRKr4Mn0cVYiMHd9qqnoxjaaKptEVHhv2Vr
|
||||
n5Z20T0CAwEAATANBgkqhkiG9w0BAQUFAAOCAQEAq2aN17O6x5q25lXQBfGfMY1a
|
||||
qtmqRiYPce2lrVNWYgFHKkTp/j90CxObufRNG7LRX7K20ohcs5/Ny9Sn2WCVhDr4
|
||||
wTcdYcrnsMXlkdpUpqwxga6X3s0IrLjAl4B/bnKk52kTlWUfxJM8/XmPBNQ+T+r3
|
||||
ns7NZ3xPZQL/kYVUc8f/NveGLezQXk//EZ9yBta4GvFMDSZl4kSAHsef493oCtrs
|
||||
pSCAaWihT37ha88HQfqDjrw43bAuEbFrskLMmrz5SCJ5ShkPshw+IHTZasO+8ih4
|
||||
E1Z5T21Q6huwtVexN2ZYI/PcD98Kh8TvhgXVOBRgmaNL3gaWcSzy27YfpO8/7g==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 2 Public Primary Certification Authority - G3
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEGTCCAwECEGFwy0mMX5hFKeewptlQW3owDQYJKoZIhvcNAQEFBQAwgcoxCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjEfMB0GA1UECxMWVmVy
|
||||
aVNpZ24gVHJ1c3QgTmV0d29yazE6MDgGA1UECxMxKGMpIDE5OTkgVmVyaVNpZ24s
|
||||
IEluYy4gLSBGb3IgYXV0aG9yaXplZCB1c2Ugb25seTFFMEMGA1UEAxM8VmVyaVNp
|
||||
Z24gQ2xhc3MgMiBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0
|
||||
eSAtIEczMB4XDTk5MTAwMTAwMDAwMFoXDTM2MDcxNjIzNTk1OVowgcoxCzAJBgNV
|
||||
BAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjEfMB0GA1UECxMWVmVyaVNp
|
||||
Z24gVHJ1c3QgTmV0d29yazE6MDgGA1UECxMxKGMpIDE5OTkgVmVyaVNpZ24sIElu
|
||||
Yy4gLSBGb3IgYXV0aG9yaXplZCB1c2Ugb25seTFFMEMGA1UEAxM8VmVyaVNpZ24g
|
||||
Q2xhc3MgMiBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAt
|
||||
IEczMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEArwoNwtUs22e5LeWU
|
||||
J92lvuCwTY+zYVY81nzD9M0+hsuiiOLh2KRpxbXiv8GmR1BeRjmL1Za6tW8UvxDO
|
||||
JxOeBUebMXoT2B/Z0wI3i60sR/COgQanDTAM6/c8DyAd3HJG7qUCyFvDyVZpTMUY
|
||||
wZF7C9UTAJu878NIPkZgIIUq1ZC2zYugzDLdt/1AVbJQHFauzI13TccgTacxdu9o
|
||||
koqQHgiBVrKtaaNS0MscxCM9H5n+TOgWY47GCI72MfbS+uV23bUckqNJzc0BzWjN
|
||||
qWm6o+sdDZykIKbBoMXRRkwXbdKsZj+WjOCE1Db/IlnF+RFgqF8EffIa9iVCYQ/E
|
||||
Srg+iQIDAQABMA0GCSqGSIb3DQEBBQUAA4IBAQA0JhU8wI1NQ0kdvekhktdmnLfe
|
||||
xbjQ5F1fdiLAJvmEOjr5jLX77GDx6M4EsMjdpwOPMPOY36TmpDHf0xwLRtxyID+u
|
||||
7gU8pDM/CzmscHhzS5kr3zDCVLCoO1Wh/hYozUK9dG6A2ydEp85EXdQbkJgNHkKU
|
||||
sQAsBNB0owIFImNjzYO1+8FtYmtpdf1dcEG59b98377BMnMiIYtYgXsVkXq642RI
|
||||
sH/7NiXaldDxJBQX3RiAa0YjOVT1jmIJBB2UkKab5iXiQkWquJCtvgiPqQtCGJTP
|
||||
cjnhsUPgKM+351psE2tJs//jGHyJizNdrDPXp/naOlXJWBD5qu9ats9LS98q
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority - G3
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEGjCCAwICEQCbfgZJoz5iudXukEhxKe9XMA0GCSqGSIb3DQEBBQUAMIHKMQsw
|
||||
CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZl
|
||||
cmlTaWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWdu
|
||||
LCBJbmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlT
|
||||
aWduIENsYXNzIDMgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
|
||||
dHkgLSBHMzAeFw05OTEwMDEwMDAwMDBaFw0zNjA3MTYyMzU5NTlaMIHKMQswCQYD
|
||||
VQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlT
|
||||
aWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWduLCBJ
|
||||
bmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlTaWdu
|
||||
IENsYXNzIDMgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkg
|
||||
LSBHMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMu6nFL8eB8aHm8b
|
||||
N3O9+MlrlBIwT/A2R/XQkQr1F8ilYcEWQE37imGQ5XYgwREGfassbqb1EUGO+i2t
|
||||
KmFZpGcmTNDovFJbcCAEWNF6yaRpvIMXZK0Fi7zQWM6NjPXr8EJJC52XJ2cybuGu
|
||||
kxUccLwgTS8Y3pKI6GyFVxEa6X7jJhFUokWWVYPKMIno3Nij7SqAP395ZVc+FSBm
|
||||
CC+Vk7+qRy+oRpfwEuL+wgorUeZ25rdGt+INpsyow0xZVYnm6FNcHOqd8GIWC6fJ
|
||||
Xwzw3sJ2zq/3avL6QaaiMxTJ5Xpj055iN9WFZZ4O5lMkdBteHRJTW8cs54NJOxWu
|
||||
imi5V5cCAwEAATANBgkqhkiG9w0BAQUFAAOCAQEAERSWwauSCPc/L8my/uRan2Te
|
||||
2yFPhpk0djZX3dAVL8WtfxUfN2JzPtTnX84XA9s1+ivbrmAJXx5fj267Cz3qWhMe
|
||||
DGBvtcC1IyIuBwvLqXTLR7sdwdela8wv0kL9Sd2nic9TutoAWii/gt/4uhMdUIaC
|
||||
/Y4wjylGsB49Ndo4YhYYSq3mtlFs3q9i6wHQHiT+eo8SGhJouPtmmRQURVyu565p
|
||||
F4ErWjfJXir0xuKhXFSbplQAz/DxwceYMBo7Nhbbo27q/a2ywtrvAkcTisDxszGt
|
||||
TxzhT5yvDwyd93gN2PQ1VoDat20Xj50egWTh/sVFuq1ruQp6Tk9LhO5L8X3dEQ==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 4 Public Primary Certification Authority - G3
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEGjCCAwICEQDsoKeLbnVqAc/EfMwvlF7XMA0GCSqGSIb3DQEBBQUAMIHKMQsw
|
||||
CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZl
|
||||
cmlTaWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWdu
|
||||
LCBJbmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlT
|
||||
aWduIENsYXNzIDQgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
|
||||
dHkgLSBHMzAeFw05OTEwMDEwMDAwMDBaFw0zNjA3MTYyMzU5NTlaMIHKMQswCQYD
|
||||
VQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlT
|
||||
aWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWduLCBJ
|
||||
bmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlTaWdu
|
||||
IENsYXNzIDQgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkg
|
||||
LSBHMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAK3LpRFpxlmr8Y+1
|
||||
GQ9Wzsy1HyDkniYlS+BzZYlZ3tCD5PUPtbut8XzoIfzk6AzufEUiGXaStBO3IFsJ
|
||||
+mGuqPKljYXCKtbeZjbSmwL0qJJgfJxptI8kHtCGUvYynEFYHiK9zUVilQhu0Gbd
|
||||
U6LM8BDcVHOLBKFGMzNcF0C5nk3T875Vg+ixiY5afJqWIpA7iCXy0lOIAgwLePLm
|
||||
NxdLMEYH5IBtptiWLugs+BGzOA1mppvqySNb247i8xOOGlktqgLw7KSHZtzBP/XY
|
||||
ufTsgsbSPZUd5cBPhMnZo0QoBmrXRazwa2rvTl/4EYIeOGM0ZlDUPpNz+jDDZq3/
|
||||
ky2X7wMCAwEAATANBgkqhkiG9w0BAQUFAAOCAQEAj/ola09b5KROJ1WrIhVZPMq1
|
||||
CtRK26vdoV9TxaBXOcLORyu+OshWv8LZJxA6sQU8wHcxuzrTBXttmhwwjIDLk5Mq
|
||||
g6sFUYICABFna/OIYUdfA5PVWw3g8dShMjWFsjrbsIKr0csKvE+MW8VLADsfKoKm
|
||||
fjaF3H48ZwC15DtS4KjrXRX5xm3wrR0OhbepmnMUWluPQSjA1egtTaRezarZ7c7c
|
||||
2NU8Qh0XwRJdRTjDOPP8hS6DRkiy1yBfkjaP53kPmF6Z6PDQpLv1U70qzlmwr25/
|
||||
bLvSHgCwIe34QWKCudiyxLtGUPMxxY8BqHTr9Xgn2uf3ZkPznoM+IKrDNWCRzg==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority - G4
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDhDCCAwqgAwIBAgIQL4D+I4wOIg9IZxIokYesszAKBggqhkjOPQQDAzCByjEL
|
||||
MAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQLExZW
|
||||
ZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNyBWZXJpU2ln
|
||||
biwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxWZXJp
|
||||
U2lnbiBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9y
|
||||
aXR5IC0gRzQwHhcNMDcxMTA1MDAwMDAwWhcNMzgwMTE4MjM1OTU5WjCByjELMAkG
|
||||
A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQLExZWZXJp
|
||||
U2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNyBWZXJpU2lnbiwg
|
||||
SW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxWZXJpU2ln
|
||||
biBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5
|
||||
IC0gRzQwdjAQBgcqhkjOPQIBBgUrgQQAIgNiAASnVnp8Utpkmw4tXNherJI9/gHm
|
||||
GUo9FANL+mAnINmDiWn6VMaaGF5VKmTeBvaNSjutEDxlPZCIBIngMGGzrl0Bp3ve
|
||||
fLK+ymVhAIau2o970ImtTR1ZmkGxvEeA3J5iw/mjgbIwga8wDwYDVR0TAQH/BAUw
|
||||
AwEB/zAOBgNVHQ8BAf8EBAMCAQYwbQYIKwYBBQUHAQwEYTBfoV2gWzBZMFcwVRYJ
|
||||
aW1hZ2UvZ2lmMCEwHzAHBgUrDgMCGgQUj+XTGoasjY5rw8+AatRIGCx7GS4wJRYj
|
||||
aHR0cDovL2xvZ28udmVyaXNpZ24uY29tL3ZzbG9nby5naWYwHQYDVR0OBBYEFLMW
|
||||
kf3upm7ktS5Jj4d4gYDs5bG1MAoGCCqGSM49BAMDA2gAMGUCMGYhDBgmYFo4e1ZC
|
||||
4Kf8NoRRkSAsdk1DPcQdhCPQrNZ8NQbOzWm9kA3bbEhCHQ6qQgIxAJw9SDkjOVga
|
||||
FRJZap7v1VmyHVIsmXHNxynfGyphe3HR3vPA5Q06Sqotp9iGKt0uEA==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority - G5
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIE0zCCA7ugAwIBAgIQGNrRniZ96LtKIVjNzGs7SjANBgkqhkiG9w0BAQUFADCB
|
||||
yjELMAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQL
|
||||
ExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNiBWZXJp
|
||||
U2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxW
|
||||
ZXJpU2lnbiBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0
|
||||
aG9yaXR5IC0gRzUwHhcNMDYxMTA4MDAwMDAwWhcNMzYwNzE2MjM1OTU5WjCByjEL
|
||||
MAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQLExZW
|
||||
ZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNiBWZXJpU2ln
|
||||
biwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxWZXJp
|
||||
U2lnbiBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9y
|
||||
aXR5IC0gRzUwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCvJAgIKXo1
|
||||
nmAMqudLO07cfLw8RRy7K+D+KQL5VwijZIUVJ/XxrcgxiV0i6CqqpkKzj/i5Vbex
|
||||
t0uz/o9+B1fs70PbZmIVYc9gDaTY3vjgw2IIPVQT60nKWVSFJuUrjxuf6/WhkcIz
|
||||
SdhDY2pSS9KP6HBRTdGJaXvHcPaz3BJ023tdS1bTlr8Vd6Gw9KIl8q8ckmcY5fQG
|
||||
BO+QueQA5N06tRn/Arr0PO7gi+s3i+z016zy9vA9r911kTMZHRxAy3QkGSGT2RT+
|
||||
rCpSx4/VBEnkjWNHiDxpg8v+R70rfk/Fla4OndTRQ8Bnc+MUCH7lP59zuDMKz10/
|
||||
NIeWiu5T6CUVAgMBAAGjgbIwga8wDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8E
|
||||
BAMCAQYwbQYIKwYBBQUHAQwEYTBfoV2gWzBZMFcwVRYJaW1hZ2UvZ2lmMCEwHzAH
|
||||
BgUrDgMCGgQUj+XTGoasjY5rw8+AatRIGCx7GS4wJRYjaHR0cDovL2xvZ28udmVy
|
||||
aXNpZ24uY29tL3ZzbG9nby5naWYwHQYDVR0OBBYEFH/TZafC3ey78DAJ80M5+gKv
|
||||
MzEzMA0GCSqGSIb3DQEBBQUAA4IBAQCTJEowX2LP2BqYLz3q3JktvXf2pXkiOOzE
|
||||
p6B4Eq1iDkVwZMXnl2YtmAl+X6/WzChl8gGqCBpH3vn5fJJaCGkgDdk+bW48DW7Y
|
||||
5gaRQBi5+MHt39tBquCWIMnNZBU4gcmU7qKEKQsTb47bDN0lAtukixlE0kF6BWlK
|
||||
WE9gyn6CagsCqiUXObXbf+eEZSqVir2G3l6BFoMtEMze/aiCKm0oHw0LxOXnGiYZ
|
||||
4fQRbxC1lfznQgUy286dUV4otp6F01vvpX1FQHKOtw5rDgb7MzVIcbidJ4vEZV8N
|
||||
hnacRHr2lVz2XTIIM6RUthg/aFzyQkqFOFSDX9HoLPKsEdao7WNq
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Universal Root Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEuTCCA6GgAwIBAgIQQBrEZCGzEyEDDrvkEhrFHTANBgkqhkiG9w0BAQsFADCB
|
||||
vTELMAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQL
|
||||
ExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwOCBWZXJp
|
||||
U2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MTgwNgYDVQQDEy9W
|
||||
ZXJpU2lnbiBVbml2ZXJzYWwgUm9vdCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAe
|
||||
Fw0wODA0MDIwMDAwMDBaFw0zNzEyMDEyMzU5NTlaMIG9MQswCQYDVQQGEwJVUzEX
|
||||
MBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlTaWduIFRydXN0
|
||||
IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAyMDA4IFZlcmlTaWduLCBJbmMuIC0gRm9y
|
||||
IGF1dGhvcml6ZWQgdXNlIG9ubHkxODA2BgNVBAMTL1ZlcmlTaWduIFVuaXZlcnNh
|
||||
bCBSb290IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIIBIjANBgkqhkiG9w0BAQEF
|
||||
AAOCAQ8AMIIBCgKCAQEAx2E3XrEBNNti1xWb/1hajCMj1mCOkdeQmIN65lgZOIzF
|
||||
9uVkhbSicfvtvbnazU0AtMgtc6XHaXGVHzk8skQHnOgO+k1KxCHfKWGPMiJhgsWH
|
||||
H26MfF8WIFFE0XBPV+rjHOPMee5Y2A7Cs0WTwCznmhcrewA3ekEzeOEz4vMQGn+H
|
||||
LL729fdC4uW/h2KJXwBL38Xd5HVEMkE6HnFuacsLdUYI0crSK5XQz/u5QGtkjFdN
|
||||
/BMReYTtXlT2NJ8IAfMQJQYXStrxHXpma5hgZqTZ79IugvHw7wnqRMkVauIDbjPT
|
||||
rJ9VAMf2CGqUuV/c4DPxhGD5WycRtPwW8rtWaoAljQIDAQABo4GyMIGvMA8GA1Ud
|
||||
EwEB/wQFMAMBAf8wDgYDVR0PAQH/BAQDAgEGMG0GCCsGAQUFBwEMBGEwX6FdoFsw
|
||||
WTBXMFUWCWltYWdlL2dpZjAhMB8wBwYFKw4DAhoEFI/l0xqGrI2Oa8PPgGrUSBgs
|
||||
exkuMCUWI2h0dHA6Ly9sb2dvLnZlcmlzaWduLmNvbS92c2xvZ28uZ2lmMB0GA1Ud
|
||||
DgQWBBS2d/ppSEefUxLVwuoHMnYH0ZcHGTANBgkqhkiG9w0BAQsFAAOCAQEASvj4
|
||||
sAPmLGd75JR3Y8xuTPl9Dg3cyLk1uXBPY/ok+myDjEedO2Pzmvl2MpWRsXe8rJq+
|
||||
seQxIcaBlVZaDrHC1LGmWazxY8u4TB1ZkErvkBYoH1quEPuBUDgMbMzxPcP1Y+Oz
|
||||
4yHJJDnp/RVmRvQbEdBNc6N9Rvk97ahfYtTxP/jgdFcrGJ2BtMQo2pSXpXDrrB2+
|
||||
BxHw1dvd5Yzw1TKwg+ZX4o+/vqGqvz0dtdQ46tewXDpPaj+PwGZsY6rp2aQW9IHR
|
||||
lRQOfc2VNNnSj3BzgXucfr2YYdhFh5iQxeuGMMY1v/D/w1WIg0vvBZIGcfK4mJO3
|
||||
7M2CYfE45k+XmCpajQ==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
+239
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
Vendored
+17
@@ -0,0 +1,17 @@
|
||||
#configuration parameters for Smart Link Management.
|
||||
|
||||
#Number of previous latency iterations to track to decide the better SLS interface
|
||||
latency_count:3
|
||||
#Threshold in ms to decide the better interface for SLS.
|
||||
latency_threshold:10
|
||||
#Number of tcp connections to be established in each latency session
|
||||
max_tcp_connects:3
|
||||
#Max waiting time for a dns query to be resolved
|
||||
dns_timeout:9
|
||||
#Minimum change in slm ratio to update the new SLA ratio
|
||||
sla_update_threshold:0.25
|
||||
#Timer in msec to track the sls updates. Only one update will be allowed
|
||||
#in this duration
|
||||
sla_update_count_timer:10000
|
||||
#default URL for establishing a tcp sessions
|
||||
slm_http_url:www.qualcomm.com
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1.0</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1.0</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1.0</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1.0</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1.0</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1.0</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-72</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2016-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-72</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-78,-78</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-78,-78</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
@@ -0,0 +1,16 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--
|
||||
Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
-->
|
||||
|
||||
<CapabilityStore version="1">
|
||||
<namespace name="vpp">
|
||||
<capability key="default_config" value="false"/>
|
||||
<capability key="disable_dynamic_hal" value="true"/>
|
||||
<capability key="enable" value="false"/>
|
||||
<capability key="enable_idle_timeout" value="true"/>
|
||||
<capability key="idle_timeout_ms" value="1000"/>
|
||||
</namespace>
|
||||
</CapabilityStore>
|
||||
+1262
File diff suppressed because it is too large
Load Diff
+3225
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,18 @@
|
||||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!--
|
||||
~ Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
~ All Rights Reserved.
|
||||
~ Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
-->
|
||||
|
||||
<!--
|
||||
This XML file declares which signature|privileged permissions should be
|
||||
granted to privileged applications on QTI devices.
|
||||
It allows additional grants on top of privapp-permissions-platform.xml
|
||||
-->
|
||||
|
||||
<exceptions>
|
||||
<exception package="com.qualcomm.qti.cne">
|
||||
<permission name="android.permission.READ_PHONE_STATE" fixed="false"/>
|
||||
</exception>
|
||||
</exceptions>
|
||||
Vendored
+60
@@ -0,0 +1,60 @@
|
||||
###################################
|
||||
##### FLP settings #####
|
||||
###################################
|
||||
|
||||
###################################
|
||||
# FLP BATCH SIZE
|
||||
###################################
|
||||
# The number of batched locations
|
||||
# requested to modem. The desired number
|
||||
# defined below may not be satisfied, as
|
||||
# the modem can only return the number
|
||||
# of batched locations that can be allocated,
|
||||
# which is limited by memory. The default
|
||||
# batch size defined as 20 as below.
|
||||
BATCH_SIZE=20
|
||||
|
||||
###################################
|
||||
# FLP OUTDOOR TRIP BATCH SIZE
|
||||
###################################
|
||||
# The number of batched locations
|
||||
# requested to modem for outdoor
|
||||
# trip batching. The desired number
|
||||
# defined below may not be satisfied, as
|
||||
# the modem can only return the number
|
||||
# of batched locations that can be allocated,
|
||||
# which is limited by memory. The default
|
||||
# trip batch size defined as 600 as below.
|
||||
OUTDOOR_TRIP_BATCH_SIZE=600
|
||||
|
||||
###################################
|
||||
# FLP BATCHING SESSION TIMEOUT
|
||||
###################################
|
||||
# Duration with which batch session timeout
|
||||
# happens in milliseconds. If not specified
|
||||
# or set to zero, batching session timeout
|
||||
# defaults to 20 seconds by the modem.
|
||||
# BATCH_SESSION_TIMEOUT=20000
|
||||
|
||||
###################################
|
||||
# FLP BATCHING ACCURACY
|
||||
###################################
|
||||
# Set to one of the defined values below
|
||||
# to define the accuracy of batching.
|
||||
# If not specified, accuracy defaults
|
||||
# to LOW.
|
||||
# FLP BATCHING ACCURACY values:
|
||||
# Low accuracy = 0
|
||||
# Medium accuracy = 1
|
||||
# High accuracy = 2
|
||||
ACCURACY=1
|
||||
|
||||
####################################
|
||||
# By default if network fixes are not sensor assisted
|
||||
# these fixes must be dropped. This parameter adds an exception
|
||||
# for targets where there is no PDR and we still want to
|
||||
# report out network fixes
|
||||
# 0: MUST NOT ALLOW NETWORK FIXES
|
||||
# 1: ALLOW NETWORK FIXES
|
||||
####################################
|
||||
ALLOW_NETWORK_FIXES = 0
|
||||
+61
@@ -0,0 +1,61 @@
|
||||
<!--
|
||||
Copyright (c) 2017 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
-->
|
||||
|
||||
<!--
|
||||
|
||||
This file is configured by OEM to customize the path used by GP FS listener
|
||||
service to save files, and will be located in /vendor/etc on device
|
||||
|
||||
"gp_data_path" and "gp_persist_path" are the /data and /persist partition
|
||||
path to save files, respectively.
|
||||
By default, "gp_data_path" is "/data/vendor/tzstorage/", and
|
||||
"gp_persist_path" is "/mnt/vendor/persist/data/".
|
||||
|
||||
To replace with different paths, please also create folder in init.qcom.rc
|
||||
file and update SEAndroid policy.
|
||||
|
||||
Take "/data/vendor/tzstorage/" as an example below,
|
||||
|
||||
A) rootdir/etc/init.qcom.rc:
|
||||
# Create /data/vendor/tzstorage directory for SFS listener
|
||||
mkdir /data/vendor/tzstorage 0770 system system
|
||||
|
||||
B) common/file.te:
|
||||
# SFS listener data file
|
||||
type data_tzstorage_file, file_type, data_file_type;
|
||||
|
||||
C) common/file_contexts:
|
||||
/data/vendor/tzstorage(/.*)? u:object_r:data_tzstorage_file:s0
|
||||
|
||||
D) common/qseecomd.te:
|
||||
# Allow SFS to write to data partition
|
||||
allow tee data_tzstorage_file:dir create_dir_perms;
|
||||
allow tee data_tzstorage_file:file create_file_perms;
|
||||
|
||||
"gp_whitelist_count" and "gp_whitelist_path"
|
||||
|
||||
Some paths needs "/data/vendor/tzstorage" appended to it at the beginning
|
||||
as they do not have access/permissions on their own.
|
||||
Use gp_whitelist_count and gp_whitelist_paths entries to add more such paths.
|
||||
By default, we add "/data/system/users" and "/data/misc/qsee" for current use
|
||||
cases.
|
||||
|
||||
To add an extra path, increment the count in gp_whitelist_count and add a new
|
||||
gp_whitelist_path entry. It is very critical that the count matches with the
|
||||
number of path entries.
|
||||
|
||||
-->
|
||||
|
||||
|
||||
<sfs_path>
|
||||
<gp_data_path> /data/vendor/tzstorage/ </gp_data_path>
|
||||
<gp_persist_path> /mnt/vendor/persist/data/ </gp_persist_path>
|
||||
<gp_whitelist_count> 4 </gp_whitelist_count>
|
||||
<gp_whitelist_path> /data/system/users/ </gp_whitelist_path>
|
||||
<gp_whitelist_path> /data/misc/qsee/ </gp_whitelist_path>
|
||||
<gp_whitelist_path> /qwes </gp_whitelist_path>
|
||||
<gp_whitelist_path> /qwes/licenses </gp_whitelist_path>
|
||||
</sfs_path>
|
||||
Vendored
+390
@@ -0,0 +1,390 @@
|
||||
# Error Estimate
|
||||
# _SET = 1
|
||||
# _CLEAR = 0
|
||||
ERR_ESTIMATE=0
|
||||
|
||||
#NTP server
|
||||
NTP_SERVER=time.xtracloud.net
|
||||
NTP_SERVER_2=asia.pool.ntp.org
|
||||
NTP_SERVER_3=0.cn.pool.ntp.org
|
||||
|
||||
#XTRA CA path
|
||||
XTRA_CA_PATH=/usr/lib/ssl-1.1/certs
|
||||
|
||||
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
||||
# 4 - Debug, 5 - Verbose
|
||||
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
||||
DEBUG_LEVEL = 3
|
||||
|
||||
# Intermediate position report, 1=enable, 0=disable
|
||||
INTERMEDIATE_POS=0
|
||||
|
||||
# supl version 1.0
|
||||
SUPL_VER=0x20000
|
||||
|
||||
# Emergency SUPL, 1=enable, 0=disable
|
||||
SUPL_ES=0
|
||||
|
||||
#Choose PDN for Emergency SUPL
|
||||
#1 - Use emergency PDN
|
||||
#0 - Use regular SUPL PDN for Emergency SUPL
|
||||
USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
|
||||
|
||||
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
|
||||
#If it is uncommented here, this value will overwrite the value from
|
||||
#config.xml.
|
||||
#MSA=0X2
|
||||
#MSB=0X1
|
||||
SUPL_MODE=3
|
||||
|
||||
# GPS Capabilities bit mask
|
||||
# SCHEDULING = 0x01
|
||||
# MSB = 0x02
|
||||
# MSA = 0x04
|
||||
# ON_DEMAND_TIME = 0x10
|
||||
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING
|
||||
CAPABILITIES=0x17
|
||||
|
||||
# Accuracy threshold for intermediate positions
|
||||
# less accurate positions are ignored, 0 for passing all positions
|
||||
ACCURACY_THRES=70
|
||||
|
||||
################################
|
||||
##### AGPS server settings #####
|
||||
################################
|
||||
|
||||
# FOR SUPL SUPPORT, set the following
|
||||
# SUPL_HOST=supl.host.com or IP
|
||||
# SUPL_PORT=1234
|
||||
|
||||
# FOR MO SUPL SUPPORT, set the following
|
||||
# MO_SUPL_HOST=supl.host.com or IP
|
||||
# MO_SUPL_PORT=1234
|
||||
|
||||
# FOR C2K PDE SUPPORT, set the following
|
||||
# C2K_HOST=c2k.pde.com or IP
|
||||
# C2K_PORT=1234
|
||||
|
||||
# Bitmask of slots that are available
|
||||
# for write/install to, where 1s indicate writable,
|
||||
# and the default value is 0 where no slots
|
||||
# are writable. For example, AGPS_CERT_WRITABLE_MASK
|
||||
# of b1000001010 makes 3 slots available
|
||||
# and the remaining 7 slots unwritable.
|
||||
#AGPS_CERT_WRITABLE_MASK=0
|
||||
|
||||
####################################
|
||||
# LTE Positioning Profile Settings
|
||||
####################################
|
||||
# LPP_PROFILE is a bit mask
|
||||
# 0: Enable RRLP on LTE(Default)
|
||||
# 1: Enable LPP_User_Plane on LTE
|
||||
# 2: Enable LPP_Control_Plane
|
||||
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
|
||||
LPP_PROFILE = 3
|
||||
|
||||
####################################
|
||||
#Datum Type
|
||||
####################################
|
||||
# 0: WGS-84
|
||||
# 1: PZ-90
|
||||
DATUM_TYPE = 0
|
||||
|
||||
################################
|
||||
# EXTRA SETTINGS
|
||||
################################
|
||||
# NMEA provider (1=Modem Processor, 0=Application Processor)
|
||||
NMEA_PROVIDER=0
|
||||
|
||||
# Customized NMEA GGA fix quality that can be used to tell
|
||||
# whether SENSOR contributed to the fix.
|
||||
#
|
||||
# When this configuration item is not enabled (set to any value that is not 1),
|
||||
# GGA fix quality conforms to NMEA standard spec as below:
|
||||
# PPP/DGNSS/SBAS correction fix w/ or w/o sensor: 2
|
||||
# RTK fixed fix w/ or w/o sensor: 4
|
||||
# RTK float fix w/ or w/o sensor: 5
|
||||
# SPE fix w/ or w/o sensor: 1
|
||||
# Sensor dead reckoning fix: 6
|
||||
#
|
||||
# When this configuration is enabled (set to 1), GGA fix quality
|
||||
# will be output as below:
|
||||
# PPP fix w/o sensor: 59, w/ sensor: 69
|
||||
# DGNSS/SBAS correction fix w/o sensor: 2, w/ sensor: 62
|
||||
# RTK fixed fix w/o sensor: 4, w/ sensor: 64
|
||||
# RTK float fix w/o sensor: 5, w/ sensor: 65,
|
||||
# SPE fix w/o sensor: 1, and w/ sensor: 61
|
||||
# Sensor dead reckoning fix: 6
|
||||
#
|
||||
# any value that is not 1 - disabled
|
||||
# 1 - enabled
|
||||
CUSTOM_NMEA_GGA_FIX_QUALITY_ENABLED = 0
|
||||
|
||||
################################
|
||||
# NMEA Reporting Rate Config, valid only when NMEA_PROVIDER is set to "0"
|
||||
################################
|
||||
# NMEA Reporting Rate
|
||||
# Set it to "1HZ" for 1Hz NMEA Reporting
|
||||
# Set it to "NHZ" for NHz NMEA Reporting
|
||||
#Default : NHZ (overridden by position update rate if set to lower rates)
|
||||
NMEA_REPORT_RATE=NHZ
|
||||
|
||||
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
|
||||
SGLTE_TARGET=0
|
||||
|
||||
##################################################
|
||||
# Select Positioning Protocol on A-GLONASS system
|
||||
##################################################
|
||||
# 0x1: RRC CPlane
|
||||
# 0x2: RRLP UPlane
|
||||
# 0x4: LLP Uplane
|
||||
A_GLONASS_POS_PROTOCOL_SELECT = 0xf
|
||||
|
||||
##################################################
|
||||
# Select technology for LPPe Control Plane
|
||||
##################################################
|
||||
# 0x1: DBH for LPPe CP
|
||||
# 0x2: WLAN AP Measurements for LPPe CP
|
||||
# 0x4: SRN AP measurement for CP
|
||||
# 0x8: Sensor Barometer Measurement LPPe CP
|
||||
#LPPE_CP_TECHNOLOGY = 0
|
||||
|
||||
##################################################
|
||||
# Select technology for LPPe User Plane
|
||||
##################################################
|
||||
# 0x1: DBH for LPPe UP
|
||||
# 0x2: WLAN AP Measurements for LPPe UP
|
||||
# 0x4: SRN AP measurement for UP
|
||||
# 0x8: Sensor Barometer Measurement LPPe UP
|
||||
#LPPE_UP_TECHNOLOGY = 0
|
||||
|
||||
##################################################
|
||||
# AGPS_CONFIG_INJECT
|
||||
##################################################
|
||||
# enable/disable injection of AGPS configurations:
|
||||
# SUPL_VER
|
||||
# SUPL_HOST
|
||||
# SUPL_PORT
|
||||
# MO_SUPL_HOST
|
||||
# MO_SUPL_PORT
|
||||
# C2K_HOST
|
||||
# C2K_PORT
|
||||
# LPP_PROFILE
|
||||
# A_GLONASS_POS_PROTOCOL_SELECT
|
||||
# 0: disable
|
||||
# 1: enable
|
||||
AGPS_CONFIG_INJECT = 1
|
||||
|
||||
##################################################
|
||||
# GNSS settings for automotive use cases
|
||||
# Configurations in following section are
|
||||
# specific to automotive use cases, others
|
||||
# please do not change, keep the default values
|
||||
##################################################
|
||||
|
||||
# AP Coarse Timestamp Uncertainty
|
||||
##################################################
|
||||
# default : 10
|
||||
# AP time stamp uncertainty, until GNSS receiver
|
||||
# is able to acquire better timing information
|
||||
AP_TIMESTAMP_UNCERTAINTY = 10
|
||||
|
||||
#####################################
|
||||
# DR_SYNC Pulse Availability
|
||||
#####################################
|
||||
# 0 : DR_SYNC pulse not available (default)
|
||||
# 1 : DR_SYNC pulse available
|
||||
# This configuration enables the driver to make use
|
||||
# of PPS events generated by DR_SYNC pulse
|
||||
# Standard Linux PPS driver needs to be enabled
|
||||
DR_SYNC_ENABLED = 0
|
||||
|
||||
#####################################
|
||||
# PPS Device name
|
||||
#####################################
|
||||
PPS_DEVICENAME = /dev/pps0
|
||||
|
||||
#####################################
|
||||
# Ignore PPS at Startup and after long outage
|
||||
#####################################
|
||||
IGNORE_PPS_PULSE_COUNT = 1
|
||||
|
||||
#####################################
|
||||
# Long GNSS RF outage in seconds
|
||||
#####################################
|
||||
GNSS_OUTAGE_DURATION = 10
|
||||
|
||||
#####################################
|
||||
# AP Clock Accuracy
|
||||
#####################################
|
||||
# Quality of APPS processor clock (in PPM).
|
||||
# Value specified is used for calculation of
|
||||
# APPS time stamp uncertainty
|
||||
AP_CLOCK_PPM = 100
|
||||
|
||||
#####################################
|
||||
# MAX ms difference to detect missing pulse
|
||||
#####################################
|
||||
# Specifies time threshold in ms to validate any missing PPS pulses
|
||||
MISSING_PULSE_TIME_DELTA = 900
|
||||
|
||||
#####################################
|
||||
# Propagation time uncertainty
|
||||
#####################################
|
||||
# This settings enables time uncertainty propagation
|
||||
# logic incase of missing PPS pulse
|
||||
PROPAGATION_TIME_UNCERTAINTY = 1
|
||||
|
||||
#######################################
|
||||
# APN / IP Type Configuration
|
||||
# APN and IP Type to use for setting
|
||||
# up WWAN call.
|
||||
# Use below values for IP Type:
|
||||
# v4 = 4
|
||||
# v6 = 6
|
||||
# v4v6 = 10
|
||||
#######################################
|
||||
# INTERNET_APN = abc.xyz
|
||||
# INTERNET_IP_TYPE = 4
|
||||
# SUPL_APN = abc.xyz
|
||||
# SUPL_IP_TYPE = 4
|
||||
|
||||
#####################################
|
||||
# Modem type
|
||||
#####################################
|
||||
# This setting configures modem type
|
||||
# (external=0 or internal=1)
|
||||
# comment out the next line to vote
|
||||
# for the first modem in the list
|
||||
MODEM_TYPE = 1
|
||||
|
||||
##################################################
|
||||
# CONSTRAINED TIME UNCERTAINTY MODE
|
||||
##################################################
|
||||
# 0 : disabled (default)
|
||||
# 1 : enabled
|
||||
# This setting enables GPS engine to keep its time
|
||||
# uncertainty below the specified constraint
|
||||
#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0
|
||||
|
||||
# If constrained time uncertainty mode is enabled,
|
||||
# this setting specifies the time uncertainty
|
||||
# threshold that gps engine need to maintain.
|
||||
# In unit of milli-seconds.
|
||||
# Default is 0.0 meaning that modem default value
|
||||
# of time uncertainty threshold will be used.
|
||||
#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0
|
||||
|
||||
# If constrained time uncertainty mode is enabled,
|
||||
# this setting specifies the power budget that
|
||||
# gps engine is allowed to spend to maintain the time
|
||||
# uncertainty.
|
||||
# Default is 0 meaning that GPS engine is not constained
|
||||
# by power budget and can spend as much power as needed.
|
||||
# In unit of 0.1 milli watt second.
|
||||
#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0
|
||||
|
||||
##################################################
|
||||
# POSITION ASSISTED CLOCK ESTIMATOR
|
||||
##################################################
|
||||
# 0 : disabled (default)
|
||||
# 1 : enabled
|
||||
# This setting enables GPS engine to estimate clock
|
||||
# bias and drift when the signal from at least 1
|
||||
# SV is available and the UE’s position is known by
|
||||
# other position engines.
|
||||
#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0
|
||||
|
||||
#####################################
|
||||
# proxyAppPackageName
|
||||
#####################################
|
||||
# This is a string that is sent to the framework
|
||||
# in nfwNotifyCb callback
|
||||
PROXY_APP_PACKAGE_NAME = com.lbe.security.miui
|
||||
|
||||
#####################################
|
||||
# CP_MTLR_ES
|
||||
#####################################
|
||||
# CP MTLR ES, 1=enable, 0=disable
|
||||
CP_MTLR_ES=0
|
||||
|
||||
##################################################
|
||||
# GNSS_DEPLOYMENT
|
||||
##################################################
|
||||
# 0 : Enable QTI GNSS (default)
|
||||
# 1 : Enable QCSR SS5
|
||||
# 2 : Enable PDS API
|
||||
# This setting use to select between QTI GNSS,
|
||||
# QCSR SS5 hardware receiver, and PDS API.
|
||||
# By default QTI GNSS receiver is enabled.
|
||||
# GNSS_DEPLOYMENT = 0
|
||||
|
||||
##################################################
|
||||
## LOG BUFFER CONFIGURATION
|
||||
##################################################
|
||||
#LOG_BUFFER_ENABLED, 1=enable, 0=disable
|
||||
#*_LEVEL_TIME_DEPTH, maximum time depth of level *
|
||||
#in log buffer, unit is second
|
||||
#*_LEVEL_MAX_CAPACITY, maximum numbers of level *
|
||||
#log print sentences in log buffer
|
||||
LOG_BUFFER_ENABLED = 0
|
||||
E_LEVEL_TIME_DEPTH = 600
|
||||
E_LEVEL_MAX_CAPACITY = 50
|
||||
W_LEVEL_TIME_DEPTH = 500
|
||||
W_LEVEL_MAX_CAPACITY = 100
|
||||
I_LEVEL_TIME_DEPTH = 400
|
||||
I_LEVEL_MAX_CAPACITY = 200
|
||||
D_LEVEL_TIME_DEPTH = 30
|
||||
D_LEVEL_MAX_CAPACITY = 300
|
||||
V_LEVEL_TIME_DEPTH = 200
|
||||
V_LEVEL_MAX_CAPACITY = 400
|
||||
|
||||
# Xiaomi add for breaking xtra download limitation
|
||||
XTRA_TEST_ENABLED = 1
|
||||
XTRA_THROTTLE_ENABLED = 0
|
||||
XTRA_SYSTEM_TIME_INJECT = 1
|
||||
# Mechanism to handle the gnss assistance data download
|
||||
# in very bad network situations
|
||||
XTRA_SOCK_KEEPALIVE=1
|
||||
##################################################
|
||||
# Allow buffer diag log packets when diag memory allocation
|
||||
# fails during boot up time.
|
||||
##################################################
|
||||
BUFFER_DIAG_LOGGING = 1
|
||||
|
||||
#######################################
|
||||
# NTRIP CLIENT LIBRARY NAME
|
||||
#######################################
|
||||
# NTRIP_CLIENT_LIB_NAME =
|
||||
|
||||
##################################################
|
||||
# Correction Data Framework settings
|
||||
# Default values:
|
||||
# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
|
||||
# CDFW_INJECT_DATA_INTERVAL = 600000 //10 mins
|
||||
# CDFW_RTCM_MESSAGE_INTERVAL = 1000 //1 second
|
||||
#
|
||||
# If multiple sources coexist on a PL,
|
||||
# the prorioty sequence can be set by the integer number.
|
||||
# PRIORITY_1 is higher than PRIORITY_2, for example,
|
||||
# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
|
||||
# CDFW_SOURCE_PRIORITY_2 = CV2X RTCM
|
||||
##################################################
|
||||
|
||||
##################################################
|
||||
# RF LOSS
|
||||
# The loss in 0.1 dbHz from the C/N0 at the antenna port
|
||||
# These values must be configured by OEM if not
|
||||
# supported in QMI LOC message
|
||||
# There is one entry for each signal type
|
||||
##################################################
|
||||
RF_LOSS_GPS = 0
|
||||
RF_LOSS_GPS_L5 = 0
|
||||
RF_LOSS_GLO_LEFT = 0
|
||||
RF_LOSS_GLO_CENTER = 0
|
||||
RF_LOSS_GLO_RIGHT = 0
|
||||
RF_LOSS_BDS = 0
|
||||
RF_LOSS_BDS_B2A = 0
|
||||
RF_LOSS_GAL = 0
|
||||
RF_LOSS_GAL_E5 = 0
|
||||
RF_LOSS_NAVIC = 0
|
||||
+134
@@ -0,0 +1,134 @@
|
||||
<AD4Calib Version="1.0 ">
|
||||
<Init NumOfParams="75">
|
||||
<init_param_001 Size="33">0x0000 0x0000 0x0BFC 0x15FE 0x2000 0x2800 0x3000 0x3800 0x4000 0x4800 0x5000 0x5800 0x6000 0x6800 0x7000 0x7800 0x8000 0x87FF 0x8FFF 0x97FF 0x9FFF 0xA7FF 0xAFFF 0xB7FF 0xBFFF 0xC7FF 0xCFFF 0xD7FF 0xDFFF 0xE7FF 0xEFFF 0xF7FF 0xFFFF </init_param_001>
|
||||
<init_param_002 Size="33">0x0000 0x0800 0x1000 0x1800 0x2000 0x2800 0x3000 0x3800 0x4000 0x4800 0x5000 0x5800 0x6000 0x6800 0x7000 0x7800 0x8000 0x87FF 0x8FFF 0x97FF 0x9FFF 0xA7FF 0xAFFF 0xB7FF 0xBFFF 0xC7FF 0xCFFF 0xD7FF 0xDFFF 0xE7FF 0xEFFF 0xF7FF 0xFFFF </init_param_002>
|
||||
<init_param_003 Size="33">0x0000 0x0800 0x1000 0x1800 0x2000 0x2800 0x3000 0x3800 0x4000 0x4800 0x5000 0x5800 0x6000 0x6800 0x7000 0x7800 0x8000 0x87FF 0x8FFF 0x97FF 0x9FFF 0xA7FF 0xAFFF 0xB7FF 0xBFFF 0xC7FF 0xCFFF 0xD7FF 0xDFFF 0xE7FF 0xEFFF 0xF7FF 0xFFFF </init_param_003>
|
||||
<init_param_004 Size="33">0x0000 0x0800 0x1000 0x1801 0x1D61 0x22F2 0x26A2 0x2993 0x2C23 0x2E94 0x3114 0x33A5 0x3685 0x39C6 0x3D66 0x4177 0x45E7 0x4AE8 0x5058 0x5669 0x5D29 0x648A 0x6CAA 0x759B 0x7F7B 0x8A5C 0x965C 0xA3AD 0xB25D 0xC2BE 0xD4EE 0xE93F 0xFFFF </init_param_004>
|
||||
<init_param_005 Size="32">0x0001 0x0032 0x0064 0x0096 0x00FA 0x015E 0x0190 0x0384 0x04E2 0x0708 0x08FC 0x0BB8 0x1770 0x2EE0 0x5DC0 0xC350 0x04B0 0x2125 0x2EE0 0x3969 0x4A1E 0x57B2 0x5DC0 0x8CA0 0xA5BA 0xC6E0 0xE0CE 0xFFFF 0xFFFF 0xFFFF 0xFFFF 0xFFFF </init_param_005>
|
||||
<init_param_006 Size="32">0x0000 0x000A 0x0019 0x0032 0x0064 0x00C8 0x0190 0x02BC 0x03E8 0x05DC 0x09C4 0x0FA0 0x1F40 0x3A98 0x7530 0xFFFF 0x0000 0x000A 0x0019 0x0032 0x0064 0x00C8 0x0190 0x02BC 0x03E8 0x05DC 0x09C4 0x0FA0 0x1F40 0x3A98 0x7530 0xFFFF </init_param_006>
|
||||
<init_param_007 Size="33">0x0000 0x0117 0x0210 0x02EF 0x03B8 0x046E 0x0514 0x05AC 0x0637 0x06B8 0x0730 0x079F 0x0808 0x086B 0x08CA 0x0925 0x097D 0x09D4 0x0A2A 0x0A7F 0x0AD5 0x0B2C 0x0B85 0x0BE1 0x0C40 0x0CA4 0x0D0C 0x0D79 0x0DEC 0x0E66 0x0EE6 0x0F6F 0x0FFF </init_param_007>
|
||||
<init_param_008 Size="33">0x00FF 0x0116 0x012E 0x0146 0x015E 0x0176 0x018E 0x01A6 0x01BE 0x01D6 0x01EE 0x0205 0x021D 0x0235 0x024D 0x0265 0x027D 0x0295 0x02AC 0x02C4 0x02DC 0x02F3 0x030B 0x0323 0x033A 0x0352 0x036A 0x0381 0x0399 0x03B1 0x03C8 0x03E0 0x03F8 </init_param_008>
|
||||
<init_param_009 Size="1">0x03</init_param_009>
|
||||
<init_param_010 Size="1">0x3F</init_param_010>
|
||||
<init_param_011 Size="1">0x0780</init_param_011>
|
||||
<init_param_012 Size="1">0x0438</init_param_012>
|
||||
<init_param_013 Size="1">0x0002</init_param_013>
|
||||
<init_param_014 Size="1">0x0002</init_param_014>
|
||||
<init_param_015 Size="1">0xFFFF</init_param_015>
|
||||
<init_param_016 Size="1">0x06</init_param_016>
|
||||
<init_param_017 Size="1">0x030</init_param_017>
|
||||
<init_param_018 Size="1">0x012</init_param_018>
|
||||
<init_param_019 Size="1">0x044</init_param_019>
|
||||
<init_param_020 Size="1">0xFFFF</init_param_020>
|
||||
<init_param_021 Size="1">0x80</init_param_021>
|
||||
<init_param_022 Size="1">0x80</init_param_022>
|
||||
<init_param_023 Size="1">0x07AE</init_param_023>
|
||||
<init_param_024 Size="1">0x0800</init_param_024>
|
||||
<init_param_025 Size="1">0x0333</init_param_025>
|
||||
<init_param_026 Size="1">0x0800</init_param_026>
|
||||
<init_param_027 Size="1">0x0333</init_param_027>
|
||||
<init_param_028 Size="1">0x0006</init_param_028>
|
||||
<init_param_029 Size="1">0x0222</init_param_029>
|
||||
<init_param_030 Size="1">0x1000</init_param_030>
|
||||
<init_param_031 Size="1">0x012C</init_param_031>
|
||||
<init_param_032 Size="1">0x0BB8</init_param_032>
|
||||
<init_param_033 Size="1">0x1DB0</init_param_033>
|
||||
<init_param_034 Size="1">0xFFFF</init_param_034>
|
||||
<init_param_035 Size="1">0xFFFF</init_param_035>
|
||||
<init_param_036 Size="1">0x10</init_param_036>
|
||||
<init_param_037 Size="1">0x00</init_param_037>
|
||||
<init_param_038 Size="1">0x10</init_param_038>
|
||||
<init_param_039 Size="1">0x00</init_param_039>
|
||||
<init_param_040 Size="1">0xFFFF</init_param_040>
|
||||
<init_param_041 Size="1">0x10</init_param_041>
|
||||
<init_param_042 Size="1">0x1000</init_param_042>
|
||||
<init_param_043 Size="1">0x10</init_param_043>
|
||||
<init_param_044 Size="1">0x0200</init_param_044>
|
||||
<init_param_045 Size="1">0x0080</init_param_045>
|
||||
<init_param_046 Size="1">0x0</init_param_046>
|
||||
<init_param_047 Size="1">0xFF</init_param_047>
|
||||
<init_param_048 Size="1">0x07</init_param_048>
|
||||
<init_param_049 Size="1">0x46</init_param_049>
|
||||
<init_param_050 Size="1">0x91</init_param_050>
|
||||
<init_param_051 Size="1">0x30</init_param_051>
|
||||
<init_param_052 Size="1">0xC0</init_param_052>
|
||||
<init_param_053 Size="1">0x000</init_param_053>
|
||||
<init_param_054 Size="1">0x3FF</init_param_054>
|
||||
<init_param_055 Size="1">0xF0</init_param_055>
|
||||
<init_param_056 Size="1">0x00</init_param_056>
|
||||
<init_param_057 Size="1">0x00</init_param_057>
|
||||
<init_param_058 Size="1">0x2</init_param_058>
|
||||
<init_param_059 Size="1">0x05</init_param_059>
|
||||
<init_param_060 Size="1">0x00</init_param_060>
|
||||
<init_param_061 Size="1">0x00</init_param_061>
|
||||
<init_param_062 Size="1">0x003</init_param_062>
|
||||
<init_param_063 Size="1">0x001</init_param_063>
|
||||
<init_param_064 Size="1">0x001</init_param_064>
|
||||
<init_param_065 Size="1">0x3FF</init_param_065>
|
||||
<init_param_066 Size="1">0x08</init_param_066>
|
||||
<init_param_067 Size="1">0x08</init_param_067>
|
||||
<init_param_068 Size="1">0x13</init_param_068>
|
||||
<init_param_069 Size="1">0x0000</init_param_069>
|
||||
<init_param_070 Size="1">0x001</init_param_070>
|
||||
<init_param_071 Size="1">0x00C</init_param_071>
|
||||
<init_param_072 Size="1">0x050</init_param_072>
|
||||
<init_param_073 Size="1">0x80</init_param_073>
|
||||
<init_param_074 Size="1">0x040</init_param_074>
|
||||
<init_param_075 Size="1">0x008</init_param_075>
|
||||
</Init>
|
||||
<Config NumOfParams="53">
|
||||
<cfg_param_001 Size="1">0x0000</cfg_param_001>
|
||||
<cfg_param_002 Size="1">0xFFFF</cfg_param_002>
|
||||
<cfg_param_003 Size="1">0x0000</cfg_param_003>
|
||||
<cfg_param_004 Size="1">0xFFFF</cfg_param_004>
|
||||
<cfg_param_005 Size="1">0x86</cfg_param_005>
|
||||
<cfg_param_006 Size="1">0x10</cfg_param_006>
|
||||
<cfg_param_007 Size="1">0x80</cfg_param_007>
|
||||
<cfg_param_008 Size="1">0x44</cfg_param_008>
|
||||
<cfg_param_009 Size="1">0x200</cfg_param_009>
|
||||
<cfg_param_010 Size="1">0x500</cfg_param_010>
|
||||
<cfg_param_011 Size="1">0x0400</cfg_param_011>
|
||||
<cfg_param_012 Size="1">0x0400</cfg_param_012>
|
||||
<cfg_param_013 Size="1">0x80</cfg_param_013>
|
||||
<cfg_param_014 Size="1">0x5025</cfg_param_014>
|
||||
<cfg_param_015 Size="1">0x0000</cfg_param_015>
|
||||
<cfg_param_016 Size="1">0x0000</cfg_param_016>
|
||||
<cfg_param_017 Size="1">0x000C</cfg_param_017>
|
||||
<cfg_param_018 Size="1">0x0800</cfg_param_018>
|
||||
<cfg_param_019 Size="1">0x0400</cfg_param_019>
|
||||
<cfg_param_020 Size="1">0x0400</cfg_param_020>
|
||||
<cfg_param_021 Size="1">0x0001</cfg_param_021>
|
||||
<cfg_param_022 Size="1">0x0222</cfg_param_022>
|
||||
<cfg_param_023 Size="1">0x0400</cfg_param_023>
|
||||
<cfg_param_024 Size="1">0x1000</cfg_param_024>
|
||||
<cfg_param_025 Size="1">0x0028</cfg_param_025>
|
||||
<cfg_param_026 Size="1">0x005F</cfg_param_026>
|
||||
<cfg_param_027 Size="1">0x0000</cfg_param_027>
|
||||
<cfg_param_028 Size="1">0x0000</cfg_param_028>
|
||||
<cfg_param_029 Size="1">0x0000</cfg_param_029>
|
||||
<cfg_param_030 Size="1">0x0018</cfg_param_030>
|
||||
<cfg_param_031 Size="1">0x060</cfg_param_031>
|
||||
<cfg_param_032 Size="1">0x240</cfg_param_032>
|
||||
<cfg_param_033 Size="1">0x80</cfg_param_033>
|
||||
<cfg_param_034 Size="1">0x0020</cfg_param_034>
|
||||
<cfg_param_035 Size="1">0x022</cfg_param_035>
|
||||
<cfg_param_036 Size="1">0x740</cfg_param_036>
|
||||
<cfg_param_037 Size="1">0x310</cfg_param_037>
|
||||
<cfg_param_038 Size="1">0x80</cfg_param_038>
|
||||
<cfg_param_039 Size="1">0x30</cfg_param_039>
|
||||
<cfg_param_040 Size="1">0x19A</cfg_param_040>
|
||||
<cfg_param_041 Size="1">0x03</cfg_param_041>
|
||||
<cfg_param_042 Size="1">0x200</cfg_param_042>
|
||||
<cfg_param_043 Size="1">0x200</cfg_param_043>
|
||||
<cfg_param_044 Size="1">0x80</cfg_param_044>
|
||||
<cfg_param_045 Size="1">0x90</cfg_param_045>
|
||||
<cfg_param_046 Size="1">0x5000</cfg_param_046>
|
||||
<cfg_param_047 Size="1">0x100</cfg_param_047>
|
||||
<cfg_param_048 Size="1">0x64</cfg_param_048>
|
||||
<cfg_param_049 Size="1">0x200</cfg_param_049>
|
||||
<cfg_param_050 Size="1">0x80</cfg_param_050>
|
||||
<cfg_param_051 Size="1">0x7D0</cfg_param_051>
|
||||
<cfg_param_052 Size="1">0xFDE8</cfg_param_052>
|
||||
<cfg_param_053 Size="1">0xC8</cfg_param_053>
|
||||
</Config>
|
||||
</AD4Calib>
|
||||
+70
@@ -0,0 +1,70 @@
|
||||
#!/vendor/bin/sh
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2009-2011, 2015, 2017 The Linux Foundation. All rights reserved.
|
||||
#
|
||||
|
||||
setprop vendor.hw.fm.init 0
|
||||
|
||||
mode=`getprop vendor.hw.fm.mode`
|
||||
version=199217
|
||||
|
||||
LOG_TAG="qti-fm"
|
||||
LOG_NAME="${0}:"
|
||||
|
||||
loge ()
|
||||
{
|
||||
/vendor/bin/log -t $LOG_TAG -p e "$LOG_NAME $@"
|
||||
}
|
||||
|
||||
logi ()
|
||||
{
|
||||
/vendor/bin/log -t $LOG_TAG -p i "$LOG_NAME $@"
|
||||
}
|
||||
|
||||
failed ()
|
||||
{
|
||||
loge "$1: exit code $2"
|
||||
exit $2
|
||||
}
|
||||
|
||||
logi "In FM shell Script"
|
||||
logi "mode: $mode"
|
||||
logi "Version : $version"
|
||||
|
||||
#$fm_qsoc_patches <fm_chipVersion> <enable/disable WCM>
|
||||
#
|
||||
case $mode in
|
||||
"normal")
|
||||
logi "inserting the radio transport module"
|
||||
echo 1 > /sys/module/radio_iris_transport/parameters/fmsmd_set
|
||||
/vendor/bin/fm_qsoc_patches $version 0
|
||||
;;
|
||||
"wa_enable")
|
||||
/vendor/bin/fm_qsoc_patches $version 1
|
||||
;;
|
||||
"wa_disable")
|
||||
/vendor/bin/fm_qsoc_patches $version 2
|
||||
;;
|
||||
*)
|
||||
logi "Shell: Default case"
|
||||
/vendor/bin/fm_qsoc_patches $version 0
|
||||
;;
|
||||
esac
|
||||
|
||||
exit_code_fm_qsoc_patches=$?
|
||||
|
||||
case $exit_code_fm_qsoc_patches in
|
||||
0)
|
||||
logi "FM QSoC calibration and firmware download succeeded"
|
||||
;;
|
||||
*)
|
||||
failed "FM QSoC firmware download and/or calibration failed" $exit_code_fm_qsoc_patches
|
||||
;;
|
||||
esac
|
||||
|
||||
setprop vendor.hw.fm.init 1
|
||||
|
||||
exit 0
|
||||
@@ -0,0 +1,5 @@
|
||||
service vendor.bluetooth-1-0-qti /vendor/bin/hw/android.hardware.bluetooth@1.0-service-qti
|
||||
class hal
|
||||
user bluetooth
|
||||
group bluetooth system wakelock oem_2901
|
||||
capabilities BLOCK_SUSPEND NET_ADMIN
|
||||
@@ -0,0 +1,27 @@
|
||||
on property:init.svc.mediadrm=running
|
||||
mkdir /data/vendor/mediadrm 0770 media mediadrm
|
||||
start vendor.move_data_sh
|
||||
|
||||
service vendor.move_data_sh /system/bin/move_widevine_data.sh
|
||||
class late_start
|
||||
user media
|
||||
group media mediadrm system
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.drm-widevine-hal-1-3 /vendor/bin/hw/android.hardware.drm@1.3-service.widevine
|
||||
interface android.hardware.drm@1.0::ICryptoFactory widevine
|
||||
interface android.hardware.drm@1.0::IDrmFactory widevine
|
||||
interface android.hardware.drm@1.1::ICryptoFactory widevine
|
||||
interface android.hardware.drm@1.1::IDrmFactory widevine
|
||||
interface android.hardware.drm@1.2::ICryptoFactory widevine
|
||||
interface android.hardware.drm@1.2::IDrmFactory widevine
|
||||
interface android.hardware.drm@1.3::ICryptoFactory widevine
|
||||
interface android.hardware.drm@1.3::IDrmFactory widevine
|
||||
interface android.hidl.base@1.0::IBase widevine
|
||||
class hal
|
||||
user media
|
||||
group media mediadrm drmrpc system
|
||||
ioprio rt 4
|
||||
writepid /dev/cpuset/foreground/tasks
|
||||
capabilities SYS_NICE
|
||||
@@ -0,0 +1,4 @@
|
||||
service gatekeeper-1-0 /vendor/bin/hw/android.hardware.gatekeeper@1.0-service-qti
|
||||
class early_hal
|
||||
user system
|
||||
group system
|
||||
@@ -0,0 +1,4 @@
|
||||
service gnss_service /vendor/bin/hw/android.hardware.gnss@2.1-service-qti
|
||||
class hal
|
||||
user gps
|
||||
group system gps radio vendor_qti_diag
|
||||
@@ -0,0 +1,7 @@
|
||||
on init
|
||||
start keymaster-4-1
|
||||
|
||||
service keymaster-4-1 /vendor/bin/hw/android.hardware.keymaster@4.1-service-qti
|
||||
class early_hal
|
||||
user system
|
||||
group system drmrpc
|
||||
+14
@@ -0,0 +1,14 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
service neuralnetworks_hal_service /vendor/bin/hw/android.hardware.neuralnetworks@1.3-service-qti
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
writepid /dev/stune/nnapi-hal/tasks
|
||||
|
||||
#Below changes moved from init.target.rc as part of go/FR53051
|
||||
on post-fs-data
|
||||
mkdir /data/vendor/nnhal 0700 system system
|
||||
Vendored
+4
@@ -0,0 +1,4 @@
|
||||
service vendor.cnd /system/vendor/bin/cnd
|
||||
class main
|
||||
user system
|
||||
group system wifi inet radio wakelock net_admin
|
||||
@@ -0,0 +1,11 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service wifidisplayhalservice /vendor/bin/wifidisplayhalservice
|
||||
class main
|
||||
user system
|
||||
group inet input audio media uhid
|
||||
capabilities NET_RAW
|
||||
|
||||
+13
@@ -0,0 +1,13 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
# Create the directories used by DPM subsystem
|
||||
|
||||
#start dataadpl service
|
||||
service vendor.dataadpl /system/vendor/bin/adpl
|
||||
class main
|
||||
user radio
|
||||
socket adpl_cmd_uds_file dgram 660 radio radio
|
||||
group radio oem_2901 diag usb inet
|
||||
disabled
|
||||
+19
@@ -0,0 +1,19 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
# Create the directories used by DPM subsystem
|
||||
|
||||
# msm specific files that need to be created on /data
|
||||
on post-fs-data
|
||||
#Create DATAQTI dir for logs
|
||||
mkdir /data/vendor/dataqti 0770 radio radio
|
||||
chmod 0770 /data/vendor/dataqti
|
||||
|
||||
#start dataqti service
|
||||
service vendor.dataqti /system/vendor/bin/qti
|
||||
class main
|
||||
user radio
|
||||
socket qti_dpm_uds_file dgram 660 radio radio
|
||||
group radio oem_2901 diag usb inet
|
||||
disabled
|
||||
+17
@@ -0,0 +1,17 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
#start dpmQmiMgr service
|
||||
service dpmQmiMgr /system/vendor/bin/dpmQmiMgr
|
||||
interface com.qualcomm.qti.dpm.api@1.0::IdpmQmi dpmQmiService
|
||||
class main
|
||||
user system
|
||||
group system
|
||||
disabled
|
||||
|
||||
on property:persist.vendor.dpmhalservice.enable=*
|
||||
start dpmQmiMgr
|
||||
|
||||
on property:persist.vendor.dpmhalservice.enable=0
|
||||
stop dpmQmiMgr
|
||||
+13
@@ -0,0 +1,13 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
# imsdatadaemon starts with root and UID will be downgraded to RADIO.
|
||||
service vendor.ims_rtp_daemon /vendor/bin/ims_rtp_daemon
|
||||
class main
|
||||
user radio
|
||||
group radio vendor_qti_diag inet log
|
||||
|
||||
on property:vendor.ims.DATA_DAEMON_STATUS=1
|
||||
restart vendor.ims_rtp_daemon
|
||||
+15
@@ -0,0 +1,15 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
# imsdatadaemon starts with root and UID will be downgraded to RADIO.
|
||||
service vendor.imsdatadaemon /vendor/bin/imsdatadaemon
|
||||
class main
|
||||
user radio
|
||||
socket ims_datad stream 0660 system radio
|
||||
group radio wifi inet vendor_qti_diag log
|
||||
disabled
|
||||
|
||||
on property:vendor.ims.QMI_DAEMON_STATUS=1
|
||||
start vendor.imsdatadaemon
|
||||
+10
@@ -0,0 +1,10 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
service vendor.imsqmidaemon /vendor/bin/imsqmidaemon
|
||||
class main
|
||||
user radio
|
||||
socket ims_qmid stream 0660 system radio
|
||||
group radio vendor_qti_diag log
|
||||
+9
@@ -0,0 +1,9 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service vendor.imsrcsservice /vendor/bin/imsrcsd
|
||||
class main
|
||||
user radio
|
||||
group radio vendor_qti_diag log inet wakelock
|
||||
disabled
|
||||
@@ -0,0 +1,2 @@
|
||||
on property:ro.board.platform=msmnile && property:ro.baseband=msm && property:ro.vendor.qti.va_aosp.support=1
|
||||
setprop ro.telephony.iwlan_operation_mode "legacy"
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
on charger
|
||||
wait /sys/class/power_supply/usb/type
|
||||
start mi_thermald
|
||||
on boot
|
||||
wait /sys/class/power_supply/usb/type
|
||||
start mi_thermald
|
||||
|
||||
service mi_thermald /system/vendor/bin/mi_thermald
|
||||
class main
|
||||
user root
|
||||
group system
|
||||
seclabel u:r:mi_thermald:s0
|
||||
+6
@@ -0,0 +1,6 @@
|
||||
service fm_dl /vendor/bin/init.qti.fm.sh
|
||||
class late_start
|
||||
user system
|
||||
group system
|
||||
disabled
|
||||
oneshot
|
||||
+14
@@ -0,0 +1,14 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on post-fs-data && property:ro.crypto.state=encrypted && property:ro.crypto.type=file
|
||||
start time_daemon
|
||||
|
||||
service time_daemon /vendor/bin/time_daemon
|
||||
class main
|
||||
user system
|
||||
group system
|
||||
capabilities SYS_TIME
|
||||
+77
@@ -0,0 +1,77 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on boot
|
||||
#Create NETMGR daemon socket area
|
||||
mkdir /dev/socket/netmgr 0750 radio radio
|
||||
|
||||
#Assign TCP buffer thresholds to be ceiling value of technology maximums
|
||||
#Increased technology maximums should be reflected here.
|
||||
write /proc/sys/net/core/rmem_max 16777216
|
||||
write /proc/sys/net/core/wmem_max 8388608
|
||||
|
||||
#Load rmnet_core driver
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_ctl
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_core
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_ctl
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_core
|
||||
|
||||
# msm specific files that need to be created on /data
|
||||
on post-fs-data
|
||||
#Create NETMGR daemon log dir
|
||||
mkdir /data/vendor/netmgr 0770 radio radio
|
||||
chmod 0770 /data/vendor/netmgr
|
||||
|
||||
# Create netmgr recovery folder
|
||||
mkdir /data/vendor/netmgr/recovery 0700 radio radio
|
||||
chmod 0770 /data/vendor/netmgr/recovery
|
||||
write /data/vendor/netmgr/recovery/recovery_info ""
|
||||
chown radio radio /data/vendor/netmgr/recovery/recovery_info
|
||||
|
||||
# Manage netmgrd based on value of property
|
||||
on property:persist.vendor.data.mode=disabled
|
||||
stop vendor.netmgrd
|
||||
|
||||
service vendor.netmgrd /system/vendor/bin/netmgrd
|
||||
class main
|
||||
|
||||
on property:ro.vendor.use_data_netmgrd=false
|
||||
# netmgr not supported on specific target
|
||||
stop vendor.netmgrd
|
||||
|
||||
on property:ro.baseband=apq
|
||||
stop vendor.netmgrd
|
||||
|
||||
on property:persist.vendor.data.shs_ko_load=1
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_shs
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_shs
|
||||
|
||||
on property:persist.vendor.data.shs_ko_load=0
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules rmnet_shs
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules/5.4-gki rmnet_shs
|
||||
|
||||
on property:persist.vendor.data.perf_ko_load=3
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -d /vendor/lib/modules rmnet_perf rmnet_perf_ingress_deag=N
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -d /vendor/lib/modules/5.4-gki rmnet_perf rmnet_perf_ingress_deag=N
|
||||
|
||||
on property:persist.vendor.data.perf_ko_load=2
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -d /vendor/lib/modules rmnet_perf rmnet_perf_opt_mode="udp"
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -d /vendor/lib/modules/5.4-gki rmnet_perf rmnet_perf_opt_mode="udp"
|
||||
|
||||
on property:persist.vendor.data.perf_ko_load=1
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_perf
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_perf
|
||||
|
||||
on property:persist.vendor.data.perf_ko_load=0
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules rmnet_perf
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules/5.4-gki rmnet_perf
|
||||
|
||||
on property:persist.vendor.data.offload_ko_load=1
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_offload
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_offload
|
||||
|
||||
on property:persist.vendor.data.offload_ko_load=0
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules rmnet_offload
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules/5.4-gki rmnet_offload
|
||||
+20
@@ -0,0 +1,20 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on boot
|
||||
#Create PORT-BRIDGE daemon socket area
|
||||
mkdir /dev/socket/port-bridge 0750 radio radio
|
||||
|
||||
# msm specific files that need to be created on /data
|
||||
on post-fs-data
|
||||
#Create port-bridge log dir
|
||||
mkdir /data/vendor/port_bridge 0770 radio radio
|
||||
chmod 0770 /data/vendor/port_bridge
|
||||
|
||||
service vendor.port-bridge /system/vendor/bin/port-bridge
|
||||
class main
|
||||
user radio
|
||||
group radio system inet
|
||||
oneshot
|
||||
+20
@@ -0,0 +1,20 @@
|
||||
service vendor.qcrild /vendor/bin/hw/qcrild
|
||||
class main
|
||||
user radio
|
||||
disabled
|
||||
group radio cache inet misc audio log readproc wakelock oem_2901 net_raw system sdcard_rw sdcard_r
|
||||
capabilities BLOCK_SUSPEND NET_ADMIN NET_RAW
|
||||
|
||||
service vendor.qcrild2 /vendor/bin/hw/qcrild -c 2
|
||||
class main
|
||||
user radio
|
||||
disabled
|
||||
group radio cache inet misc audio log readproc wakelock oem_2901 net_raw system sdcard_rw sdcard_r
|
||||
capabilities BLOCK_SUSPEND NET_ADMIN NET_RAW
|
||||
|
||||
service vendor.qcrild3 /vendor/bin/hw/qcrild -c 3
|
||||
class main
|
||||
user radio
|
||||
disabled
|
||||
group radio cache inet misc audio log readproc wakelock oem_2901
|
||||
capabilities BLOCK_SUSPEND NET_ADMIN NET_RAW
|
||||
+11
@@ -0,0 +1,11 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
on init
|
||||
start vendor.qseecomd
|
||||
|
||||
service vendor.qseecomd /vendor/bin/qseecomd
|
||||
class core
|
||||
user root
|
||||
group root
|
||||
+16
@@ -0,0 +1,16 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
# Start daemon after boot completed
|
||||
on property:sys.boot_completed=1
|
||||
start vendor.ssgtzd
|
||||
|
||||
# Used 'disabled' flag, so daemon won't be started until explicit start
|
||||
service vendor.ssgtzd /vendor/bin/ssgtzd
|
||||
class late_start
|
||||
user system
|
||||
group system
|
||||
disabled
|
||||
socket ssgtzd stream 0660 system inet
|
||||
socket qwes_ipc stream 0660 system inet
|
||||
@@ -0,0 +1,4 @@
|
||||
service display-color-hal-1-0 /vendor/bin/hw/vendor.display.color@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
@@ -0,0 +1,42 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
#
|
||||
# Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
service vendor.adsprpcd /vendor/bin/adsprpcd
|
||||
class main
|
||||
user system
|
||||
group media
|
||||
|
||||
service vendor.adsprpcd_audiopd /vendor/bin/adsprpcd audiopd
|
||||
class main
|
||||
user media
|
||||
group media
|
||||
@@ -0,0 +1,40 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
#
|
||||
# Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
service vendor.cdsprpcd /vendor/bin/cdsprpcd
|
||||
class main
|
||||
user system
|
||||
group system
|
||||
|
||||
on property:vendor.fastrpc.disable.cdsprpcd.daemon=1
|
||||
stop vendor.cdsprpcd
|
||||
@@ -0,0 +1,10 @@
|
||||
#
|
||||
# Copyright (c) 2017-2018, 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
service qti_esepowermanager_service_1_1 /vendor/bin/hw/vendor.qti.esepowermanager@1.1-service
|
||||
class hal
|
||||
user system
|
||||
group nfc system
|
||||
@@ -0,0 +1,8 @@
|
||||
# Copyright (c) 2017 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service alarm-hal-1-0 /vendor/bin/hw/vendor.qti.hardware.alarm@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
+8
@@ -0,0 +1,8 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service vendor.capabilityconfigstore /vendor/bin/hw/vendor.qti.hardware.capabilityconfigstore@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
+43
@@ -0,0 +1,43 @@
|
||||
# Copyright (c) 2019-2020, Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2013-2018, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
|
||||
service vendor.hvdcp_opti /vendor/bin/hvdcp_opti
|
||||
class main
|
||||
user system
|
||||
group system wakelock
|
||||
capabilities BLOCK_SUSPEND WAKE_ALARM
|
||||
disabled
|
||||
|
||||
service vendor.qti-chg-policy-sh /vendor/bin/init.qti.chg_policy.sh
|
||||
class core
|
||||
user root
|
||||
oneshot
|
||||
disabled
|
||||
|
||||
on boot
|
||||
enable vendor.qti-chg-policy-sh
|
||||
start vendor.qti-chg-policy-sh
|
||||
|
||||
on charger
|
||||
chown radio wakelock /sys/power/wake_lock
|
||||
chmod 0660 /sys/power/wake_lock
|
||||
chown radio wakelock /sys/power/wake_unlock
|
||||
chmod 0660 /sys/power/wake_unlock
|
||||
mkdir /mnt/vendor/persist/hvdcp_opti 0770 root system
|
||||
mount_all /vendor/etc/charger_fstab.qti --early
|
||||
enable vendor.qti-chg-policy-sh
|
||||
start vendor.qti-chg-policy-sh
|
||||
|
||||
on property:persist.vendor.hvdcp_opti.start=2
|
||||
rmdir /mnt/vendor/persist/hvdcp_opti
|
||||
setprop persist.vendor.hvdcp_opti.start 0
|
||||
|
||||
on property:persist.vendor.hvdcp_opti.start=1
|
||||
mkdir /mnt/vendor/persist/hvdcp_opti 0770 root system
|
||||
enable vendor.hvdcp_opti
|
||||
start vendor.hvdcp_opti
|
||||
setprop persist.vendor.hvdcp_opti.start 0
|
||||
@@ -0,0 +1,13 @@
|
||||
# Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
service vendor.dspservice /vendor/bin/dspservice
|
||||
class hal
|
||||
user system
|
||||
group system wakelock oem_2908
|
||||
capabilities BLOCK_SUSPEND
|
||||
interface vendor.qti.hardware.dsp@1.0::IDspService dspservice
|
||||
|
||||
# uncomment below to disable service at boot
|
||||
# disabled
|
||||
@@ -0,0 +1,15 @@
|
||||
#
|
||||
# Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on post-fs-data
|
||||
# create QDMA shard dropbox
|
||||
mkdir /data/vendor/qdma/shared 0770 system system
|
||||
mkdir /data/vendor/qdma/shared/3 0770 system system
|
||||
|
||||
service qccvndhalservice /vendor/bin/hw/vendor.qti.hardware.qccvndhal@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
@@ -0,0 +1,14 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
#
|
||||
|
||||
on init
|
||||
start qseecom-service
|
||||
|
||||
service qseecom-service /vendor/bin/hw/vendor.qti.hardware.qseecom@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system drmrpc
|
||||
@@ -0,0 +1,4 @@
|
||||
service qteeconnector-hal-1-0 /vendor/bin/hw/vendor.qti.hardware.qteeconnector@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
@@ -0,0 +1,8 @@
|
||||
# Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service soter-1-0 /vendor/bin/hw/vendor.qti.hardware.soter@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system drmrpc
|
||||
@@ -0,0 +1,4 @@
|
||||
service tui_comm-1-0 /vendor/bin/hw/vendor.qti.hardware.tui_comm@1.0-service-qti
|
||||
class hal
|
||||
user system
|
||||
group system drmrpc
|
||||
@@ -0,0 +1,7 @@
|
||||
service vendor-qti-media-c2-hal-1-0 /vendor/bin/hw/vendor.qti.media.c2@1.0-service
|
||||
class hal
|
||||
user mediacodec
|
||||
group mediadrm camera drmrpc system
|
||||
ioprio rt 4
|
||||
writepid /dev/cpuset/foreground/tasks
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
service vendor.rmt_storage /vendor/bin/rmt_storage
|
||||
class core
|
||||
user root
|
||||
shutdown critical
|
||||
ioprio rt 0
|
||||
@@ -0,0 +1,4 @@
|
||||
service secureelement-hal_1_2 /vendor/bin/hw/vendor.qti.secure_element@1.2-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
+13
@@ -0,0 +1,13 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
# Create pddump directory
|
||||
on post-fs-data
|
||||
mkdir /data/vendor/pddump 0770 oem_2903 oem_2903
|
||||
|
||||
service vendor.tftp_server /vendor/bin/tftp_server
|
||||
class core
|
||||
user root
|
||||
@@ -0,0 +1,4 @@
|
||||
service vendor.mlipay-1-1 /vendor/bin/mlipayd@1.1
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
+19
@@ -0,0 +1,19 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
service vendor.vppservice /vendor/bin/vppservice
|
||||
class hal
|
||||
user media
|
||||
group camera
|
||||
|
||||
# HIDL interfaces
|
||||
interface vendor.qti.hardware.vpp@1.1::IHidlVppService vppService
|
||||
interface vendor.qti.hardware.vpp@1.2::IHidlVppService vppService
|
||||
interface vendor.qti.hardware.vpp@1.3::IHidlVppService vppService
|
||||
|
||||
# don't auto restart
|
||||
oneshot
|
||||
|
||||
# start only when requested (uncomment below to disable service at boot)
|
||||
# disabled
|
||||
Vendored
+277
@@ -0,0 +1,277 @@
|
||||
#########################################
|
||||
# Log verbosity control for izat modules
|
||||
#########################################
|
||||
# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5
|
||||
IZAT_DEBUG_LEVEL = 2
|
||||
|
||||
##################################################
|
||||
# Select WIFI Wait Timeout value in seconds for SUPL
|
||||
##################################################
|
||||
WIFI_WAIT_TIMEOUT_SELECT = 0
|
||||
|
||||
##################################################
|
||||
# Time interval of injecting SRN scan data to modem
|
||||
# time in seconds.
|
||||
# Note: recommended value is between 1-5 sec
|
||||
##################################################
|
||||
LPPE_SRN_DATA_SCAN_INJECT_TIME=2
|
||||
|
||||
################################
|
||||
# NLP Settings
|
||||
################################
|
||||
# NLP_MODE 1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred
|
||||
# For Automotive products, please use NLP_MODE = 4 only.
|
||||
# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
|
||||
# to determine how much Tolerance for first position
|
||||
# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
|
||||
# to determine how much Tolerance for positions after first
|
||||
# NLP_THRESHOLD: Sets how many failures needed before
|
||||
# switching preferred NLP in Combo mode
|
||||
# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
|
||||
# must be, in multiples, between two NLP location reports to
|
||||
# be considered much worse accuracy. Used in switching logic
|
||||
# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines
|
||||
# whether or not to still send network location requests to
|
||||
# QNP when the EULA is not consented to by the user. QNP can
|
||||
# still return ZPP locations or injected locations even
|
||||
# without EULA consent, but the uncertainty can be high.
|
||||
# QNP preferred mode prefers QNP when there is EULA consent,
|
||||
# otherwise OSNLP is used.
|
||||
NLP_MODE = 1
|
||||
NLP_MODE_EMERGENCY = 2
|
||||
NLP_TOLERANCE_TIME_FIRST = 5000
|
||||
NLP_TOLERANCE_TIME_AFTER = 20000
|
||||
NLP_THRESHOLD = 3
|
||||
NLP_ACCURACY_MULTIPLE = 2
|
||||
NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1
|
||||
|
||||
#########################################
|
||||
# NLP PACKAGE SETTINGS
|
||||
#########################################
|
||||
# OSNLP_PACKAGE: name of default NLP package
|
||||
OSNLP_PACKAGE = com.google.android.gms
|
||||
# REGION_OSNLP_PACKAGE:
|
||||
# This value will be used as alternative
|
||||
# for particular region where default NLP is not functional.
|
||||
#REGION_OSNLP_PACKAGE =
|
||||
|
||||
###################################
|
||||
# GEOFENCE SERVICES
|
||||
###################################
|
||||
# If set to one of the defined values below, it will override
|
||||
# the responsiveness for geofence services, which implements
|
||||
# the Proximity Alert API. If not set to a value defined below,
|
||||
# which is default, it will not override the responsivness.
|
||||
# The geofence HAL API is unaffected by this value.
|
||||
# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
|
||||
# 1: LOW responsiveness
|
||||
# 2: MEDIUM responsiveness
|
||||
# 3: HIGH responsiveness
|
||||
GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
|
||||
|
||||
#####################################
|
||||
#GTP Opt-In app
|
||||
#####################################
|
||||
|
||||
#GTP privacy policy version url
|
||||
#https support is required
|
||||
GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html
|
||||
|
||||
#GTP privacy policy version download retry interval
|
||||
#unit is second. default is 86400
|
||||
GTP_PRIVACY_RETRY_INTERVAL = 86400
|
||||
|
||||
#####################################
|
||||
# IZAT PREMIUM FEATURE SETTINGS
|
||||
#####################################
|
||||
#Possible states of a feature:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
#PREMIUM
|
||||
|
||||
#GTP_MODE valid modes:
|
||||
# DISABLED
|
||||
# LEGACY_WWAN
|
||||
# SDK (WWAN not available for Modems before LocTech 10.0)
|
||||
# SDK_WIFI (WWAN provided by legacy Modem)
|
||||
GTP_MODE=DISABLED
|
||||
|
||||
#GTP_WAA valid modes:
|
||||
# DISABLED
|
||||
# BASIC
|
||||
GTP_WAA=DISABLED
|
||||
|
||||
#SAP valid modes:
|
||||
# DISABLED
|
||||
# BASIC
|
||||
# PREMIUM
|
||||
# PREMIUM_ENV_AIDING
|
||||
# MODEM_DEFAULT
|
||||
SAP=PREMIUM
|
||||
|
||||
#FREE_WIFI_SCAN_INJECT valid modes:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
FREE_WIFI_SCAN_INJECT=BASIC
|
||||
|
||||
#SUPL_WIFI valid modes:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
SUPL_WIFI=BASIC
|
||||
|
||||
#WIFI_SUPPLICANT_INFO valid modes:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
WIFI_SUPPLICANT_INFO=BASIC
|
||||
|
||||
#####################################
|
||||
# Location process launcher settings
|
||||
#####################################
|
||||
|
||||
# DO NOT MODIFY
|
||||
# Modifying below attributes without
|
||||
# caution can have serious implications.
|
||||
|
||||
#Values for PROCESS_STATE:
|
||||
# ENABLED
|
||||
# DISABLED
|
||||
|
||||
#Values for LOW_RAM_TARGETS:
|
||||
# ENABLED
|
||||
# DISABLED
|
||||
# Property to enable/disable processes for low ram targets. Uses ro.config.low_ram property
|
||||
# to identify low ram targets.
|
||||
|
||||
#PROCESS_NAME
|
||||
# Name of the executable file.
|
||||
|
||||
#FEATURE MASKS:
|
||||
# GTP-WIFI 0X03
|
||||
# GTP-MP-CELL 0xc00
|
||||
# GTP-WAA 0x100
|
||||
# SAP 0Xc0
|
||||
# ODCPI 0x1000
|
||||
# FREE_WIFI_SCAN_INJECT 0x2000
|
||||
# SUPL_WIFI 0x4000
|
||||
# WIFI_SUPPLICANT_INFO 0x8000
|
||||
|
||||
#Values for PLATFORMS can be:
|
||||
#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
|
||||
#2. 'all' or 'all exclude' -> for All platforms
|
||||
#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937
|
||||
|
||||
#Values for SOC_IDS can be:
|
||||
#1. Any valid values obtained from soc_id node separated by single space. For example: 339 386 436
|
||||
## soc_id value can be obtained from any one of below node:
|
||||
## - /sys/devices/soc0/soc_id
|
||||
## - /sys/devices/system/soc/soc0/id
|
||||
#2. 'all' or 'all exclude' -> for All soc id's
|
||||
#3. 'all exclude XXXX' -> All soc id's exclude XXXX. For example: all exclude 339 386
|
||||
|
||||
#Values for BASEBAND can be:
|
||||
#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
|
||||
#2. 'all' or 'all exclude' -> for all basebands
|
||||
#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
|
||||
PROCESS_NAME=lowi-server
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=gps wifi inet oem_2901
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0xf303
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=0
|
||||
|
||||
PROCESS_NAME=xtwifi-inet-agent
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=inet gps
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xc03
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all exclude 386 436
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
PROCESS_NAME=xtwifi-client
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=wifi inet gps system oem_2904
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xd03
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all exclude 386 436
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
PROCESS_NAME=slim_daemon
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=gps oem_2901 can plugdev diag sensors
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xf0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all exclude 386 436
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
PROCESS_NAME=xtra-daemon
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=inet gps system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=ENABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=0
|
||||
|
||||
########################################
|
||||
# Engine Service which host DRE module #
|
||||
# To enable DRE engine service, change #
|
||||
# PROCESS_STATE=ENABLED #
|
||||
########################################
|
||||
PROCESS_NAME=engine-service
|
||||
PROCESS_ARGUMENT=DRE-INT libloc_epDr.so
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=gps diag inet qwes oem_2901 system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
########################################
|
||||
# Engine Service which host PPE module #
|
||||
# To enable PPE engine service, change #
|
||||
# PROCESS_STATE=ENABLED #
|
||||
# and update process arugements #
|
||||
# with PPE library name #
|
||||
#PROCESS_ARGUMENT=PPE libepsimulator.so#
|
||||
########################################
|
||||
PROCESS_NAME=engine-service
|
||||
PROCESS_ARGUMENT=PPE libepsimulator.so
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=gps diag inet qwes oem_2901 system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
Vendored
+27
@@ -0,0 +1,27 @@
|
||||
#*====*====*====*====*====*====*====*====*====*====*====*====*====*====*====*
|
||||
#
|
||||
# LOWI Config file - default
|
||||
#
|
||||
# GENERAL DESCRIPTION
|
||||
# This file contains the config params for LOWI
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# 2012-2013 Qualcomm Atheros, Inc.
|
||||
# All Rights Reserved.
|
||||
# Qualcomm Atheros Confidential and Proprietary.
|
||||
#
|
||||
# Export of this technology or software is regulated by the U.S. Government.
|
||||
# Diversion contrary to U.S. law prohibited.
|
||||
#=============================================================================*/
|
||||
|
||||
# X86 ONLY - UBUNTU:
|
||||
# Copy this file in the same directory where the executable is
|
||||
|
||||
# Log level
|
||||
# EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100
|
||||
LOWI_LOG_LEVEL = 3
|
||||
LOWI_USE_LOWI_LP = 0
|
||||
|
||||
+443
@@ -0,0 +1,443 @@
|
||||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!-- Copyright (C) 2012-2020 The Linux Foundation. All rights reserved.
|
||||
Not a contribution.
|
||||
Copyright (C) 2012-2013 The Android Open Source Project
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
-->
|
||||
|
||||
<!--
|
||||
<!DOCTYPE MediaCodecs [
|
||||
<!ELEMENT Include EMPTY>
|
||||
<!ATTLIST Include href CDATA #REQUIRED>
|
||||
<!ELEMENT MediaCodecs (Decoders|Encoders|Include)*>
|
||||
<!ELEMENT Decoders (MediaCodec|Include)*>
|
||||
<!ELEMENT Encoders (MediaCodec|Include)*>
|
||||
<!ELEMENT MediaCodec (Type|Quirk|Include)*>
|
||||
<!ATTLIST MediaCodec name CDATA #REQUIRED>
|
||||
<!ATTLIST MediaCodec type CDATA>
|
||||
<!ELEMENT Type EMPTY>
|
||||
<!ATTLIST Type name CDATA #REQUIRED>
|
||||
<!ELEMENT Quirk EMPTY>
|
||||
<!ATTLIST Quirk name CDATA #REQUIRED>
|
||||
]>
|
||||
|
||||
There's a simple and a complex syntax to declare the availability of a
|
||||
media codec:
|
||||
|
||||
A codec that properly follows the OpenMax spec and therefore doesn't have any
|
||||
quirks and that only supports a single content type can be declared like so:
|
||||
|
||||
<MediaCodec name="OMX.foo.bar" type="something/interesting" />
|
||||
|
||||
If a codec has quirks OR supports multiple content types, the following syntax
|
||||
can be used:
|
||||
|
||||
<MediaCodec name="OMX.foo.bar" >
|
||||
<Type name="something/interesting" />
|
||||
<Type name="something/else" />
|
||||
...
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="output-buffers-are-unreadable" />
|
||||
</MediaCodec>
|
||||
|
||||
Only the three quirks included above are recognized at this point:
|
||||
|
||||
"requires-allocate-on-input-ports"
|
||||
must be advertised if the component does not properly support specification
|
||||
of input buffers using the OMX_UseBuffer(...) API but instead requires
|
||||
OMX_AllocateBuffer to be used.
|
||||
|
||||
"requires-allocate-on-output-ports"
|
||||
must be advertised if the component does not properly support specification
|
||||
of output buffers using the OMX_UseBuffer(...) API but instead requires
|
||||
OMX_AllocateBuffer to be used.
|
||||
|
||||
"output-buffers-are-unreadable"
|
||||
must be advertised if the emitted output buffers of a decoder component
|
||||
are not readable, i.e. use a custom format even though abusing one of
|
||||
the official OMX colorspace constants.
|
||||
Clients of such decoders will not be able to access the decoded data,
|
||||
naturally making the component much less useful. The only use for
|
||||
a component with this quirk is to render the output to the screen.
|
||||
Audio decoders MUST NOT advertise this quirk.
|
||||
Video decoders that advertise this quirk must be accompanied by a
|
||||
corresponding color space converter for thumbnail extraction,
|
||||
matching surfaceflinger support that can render the custom format to
|
||||
a texture and possibly other code, so just DON'T USE THIS QUIRK.
|
||||
|
||||
|
||||
-->
|
||||
|
||||
<!--
|
||||
Non-Secure decoder capabilities
|
||||
(MB is defined as 16x16)
|
||||
_____________________________________________________________________
|
||||
| Codec | W H fps Mbps MB/s Max MB/s|
|
||||
|_____________|_____________________________________________________|
|
||||
| h264 | 1920 1088 480 220 3916800 3916800 |
|
||||
| | 3820 2160 120 220 3888000 |
|
||||
| | 4096 2160 96 220 3317760 |
|
||||
| | 4096 2304 60 220 2211840 |
|
||||
| | 7680 4320 30 220 3888000 |
|
||||
| | 8192 4320 24 220 3317760 |
|
||||
| hevc | 1920 1088 480 220 3916800 3916800 |
|
||||
| | 3820 2160 120 220 3888000 |
|
||||
| | 4096 2160 96 220 3317760 |
|
||||
| | 4096 2304 60 220 2211840 |
|
||||
| | 7680 4320 30 220 3888000 |
|
||||
| | 8192 4320 24 220 3317760 |
|
||||
| mpeg4-sw | 1920 1088 30 40 244800 244800 |
|
||||
| vp8 | 1280 720 240 100 864000 1036800 |
|
||||
| | 1920 1088 120 100 979200 |
|
||||
| | 3840 2160 30 100 972000 |
|
||||
| | 4096 2160 30 100 1036800 |
|
||||
| | 4096 2304 24 100 884736 |
|
||||
| vp9 | 1920 1088 480 220 3916800 3916800 |
|
||||
| | 3820 2160 120 220 3888000 |
|
||||
| | 4096 2160 96 220 3317760 |
|
||||
| | 4096 2304 60 220 2211840 |
|
||||
| | 7680 4320 30 220 3888000 |
|
||||
| | 8192 4320 24 220 3317760 |
|
||||
| h263-sw | 864 480 30 16 48600 48600 |
|
||||
| mpeg2 | 1920 1088 30 40 244800 244800 |
|
||||
|_____________|_____________________________________________________|
|
||||
|
||||
Secure decoder capabilities
|
||||
(MB is defined as 16x16)
|
||||
__________________________________________________________________
|
||||
| Codec | W H fps Mbps MB/s Max MB/s|
|
||||
|__________|_____________________________________________________|
|
||||
| h264 | 1280 720 60 40 216000 2073600 |
|
||||
| | 1920 1088 60 40 489600 |
|
||||
| | 3840 2160 60 40 1944000 |
|
||||
| | 4096 2160 60 40 2073600 |
|
||||
| | 4096 2304 30 40 1105920 |
|
||||
| hevc | 1280 720 60 40 216000 2073600 |
|
||||
| | 1920 1088 60 40 489600 |
|
||||
| | 3840 2160 60 40 1944000 |
|
||||
| | 4096 2160 60 40 2073600 |
|
||||
| | 4096 2304 30 40 1105920 |
|
||||
| vp9 | 1280 720 60 40 216000 2073600 |
|
||||
| | 1920 1088 60 40 489600 |
|
||||
| | 3840 2160 60 40 1944000 |
|
||||
| | 4096 2160 60 40 2073600 |
|
||||
| | 4096 2304 30 40 1105920 |
|
||||
| mpeg2 | 1920 1088 30 40 244800 244800 |
|
||||
|__________|_____________________________________________________|
|
||||
|
||||
Non-Secure encoder capabilities (Secure not supported)
|
||||
(MB is defined as 16x16)
|
||||
__________________________________________________________________
|
||||
| Codec | W H fps Mbps MB/s Max MB/s|
|
||||
|__________|_____________________________________________________|
|
||||
| h264 | 1280 720 480 160 1728000 1958400 |
|
||||
| | 1920 1088 240 160 1958400 |
|
||||
| | 3840 2160 60 160 1944000 |
|
||||
| | 4096 2160 48 160 1658880 |
|
||||
| | 4096 2304 30 160 1105920 |
|
||||
| hevc | 1280 720 480 160 1728000 1958400 |
|
||||
| | 1920 1088 240 160 1958400 |
|
||||
| | 3840 2160 60 160 1944000 |
|
||||
| | 4096 2160 48 160 1658880 |
|
||||
| | 4096 2304 30 160 1105920 |
|
||||
| mpeg4-sw | 1280 720 30 4 108000 108000 |
|
||||
| vp8 | 1280 720 240 40 864000 1036800 |
|
||||
| | 1920 1088 120 40 979200 |
|
||||
| | 3840 2160 30 40 972000 |
|
||||
| | 4096 2160 30 40 1036800 |
|
||||
| | 4096 2304 24 40 884736 |
|
||||
| h263-sw | 864 480 30 2 48600 48600 |
|
||||
|__________|_____________________________________________________|
|
||||
-->
|
||||
|
||||
<MediaCodecs>
|
||||
<Include href="media_codecs_google_audio.xml" />
|
||||
<Include href="media_codecs_google_telephony.xml" />
|
||||
<Settings>
|
||||
<Setting name="max-video-encoder-input-buffers" value="11" />
|
||||
</Settings>
|
||||
<Encoders>
|
||||
<!-- Video Hardware -->
|
||||
<MediaCodec name="OMX.qcom.video.encoder.avc" type="video/avc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="1958400" />
|
||||
<Limit name="bitrate" range="1-160000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="56" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
<Limit name="performance-point-1920x1080" value="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.vp8" type="video/x-vnd.on2.vp8" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="1036800" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-240" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="24" />
|
||||
<Limit name="performance-point-4096x2160" value="30" />
|
||||
<Limit name="performance-point-3840x2160" value="30" />
|
||||
<Limit name="performance-point-1920x1080" value="120" />
|
||||
<Limit name="performance-point-1280x720" value="240" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.hevc" type="video/hevc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="1958400" />
|
||||
<Limit name="bitrate" range="1-160000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="quality" range="0-100" default="80" />
|
||||
<Limit name="performance-point-4096x2304" value="56" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
<Limit name="performance-point-1920x1080" value="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
<Feature name="bitrate-modes" value="VBR,CBR" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.hevc.cq" type="video/hevc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="96x96" max="512x512" />
|
||||
<Limit name="frame-rate" range="1-20" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="quality" range="0-100" default="80" />
|
||||
<Limit name="performance-point-512x512" value="480" />
|
||||
<Feature name="bitrate-modes" value="CQ" />
|
||||
</MediaCodec>
|
||||
<!-- Video Software -->
|
||||
<MediaCodec name="OMX.qcom.video.encoder.h263sw" type="video/3gpp" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="96x96" max="864x480" />
|
||||
<Limit name="alignment" value="4x4" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="48600" />
|
||||
<Limit name="bitrate" range="1-2000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-720x480" value="30" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.mpeg4sw" type="video/mp4v-es" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="96x96" max="1280x720" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="108000" />
|
||||
<Limit name="bitrate" range="1-4000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-1280x720" value="30" />
|
||||
<Attribute name="software-codec" />
|
||||
</MediaCodec>
|
||||
</Encoders>
|
||||
<Decoders>
|
||||
<!-- Video Hardware -->
|
||||
<MediaCodec name="OMX.qcom.video.decoder.avc" type="video/avc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="8192x4320" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="3916800" />
|
||||
<Limit name="bitrate" range="1-220000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="60" />
|
||||
<Limit name="performance-point-4096x2160" value="96" />
|
||||
<Limit name="performance-point-3840x2160" value="120" />
|
||||
<Limit name="performance-point-1920x1088" range="480" />
|
||||
<Limit name="performance-point-1920x1088" range="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.avc.secure" type="video/avc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="2073600" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-60" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Feature name="secure-playback" required="true" />
|
||||
<Limit name="concurrent-instances" max="3" />
|
||||
<Limit name="performance-point-4096x2304" value="30" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.mpeg2" type="video/mpeg2" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="1920x1088" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="244800" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-1920x1080" value="30" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.mpeg2.secure" type="video/mpeg2" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="1920x1088" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="244800" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Feature name="secure-playback" required="true" />
|
||||
<Limit name="concurrent-instances" max="3" />
|
||||
<Limit name="performance-point-1920x1080" value="30" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.vp8" type="video/x-vnd.on2.vp8" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="1036800" />
|
||||
<Limit name="bitrate" range="1-100000000" />
|
||||
<Limit name="frame-rate" range="1-240" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="24" />
|
||||
<Limit name="performance-point-4096x2160" value="30" />
|
||||
<Limit name="performance-point-3840x2160" value="30" />
|
||||
<Limit name="performance-point-1920x1080" value="120" />
|
||||
<Limit name="performance-point-1280x720" value="240" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.vp9" type="video/x-vnd.on2.vp9" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="8192x4320" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="3916800" />
|
||||
<Limit name="bitrate" range="1-220000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="6" />
|
||||
<Limit name="performance-point-4096x2304" value="60" />
|
||||
<Limit name="performance-point-4096x2160" value="96" />
|
||||
<Limit name="performance-point-3840x2160" value="120" />
|
||||
<Limit name="performance-point-1920x1088" range="480" />
|
||||
<Limit name="performance-point-1920x1088" range="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.vp9.secure" type="video/x-vnd.on2.vp9" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="2073600" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-60" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Feature name="secure-playback" required="true" />
|
||||
<Limit name="concurrent-instances" max="3" />
|
||||
<Limit name="performance-point-4096x2304" value="30" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.hevc" type="video/hevc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="8192x4320" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="3916800" />
|
||||
<Limit name="bitrate" range="1-220000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="60" />
|
||||
<Limit name="performance-point-4096x2160" value="96" />
|
||||
<Limit name="performance-point-3840x2160" value="120" />
|
||||
<Limit name="performance-point-1920x1088" range="480" />
|
||||
<Limit name="performance-point-1920x1088" range="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.hevc.secure" type="video/hevc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="2073600" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-60" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Feature name="secure-playback" required="true" />
|
||||
<Limit name="concurrent-instances" max="3" />
|
||||
<Limit name="performance-point-4096x2304" value="30" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
</MediaCodec>
|
||||
<!-- Video Software -->
|
||||
<MediaCodec name="OMX.qti.video.decoder.h263sw" type="video/3gpp" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="864x480" />
|
||||
<Limit name="alignment" value="4x4" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="48600" />
|
||||
<Limit name="bitrate" range="1-16000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-720x480" value="30" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qti.video.decoder.mpeg4sw" type="video/mp4v-es">
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="1920x1088" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="244800" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-1920x1080" value="30" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.google.opus.decoder" type="audio/opus" update="true" rank="100"/>
|
||||
</Decoders>
|
||||
<Include href="media_codecs_google_video.xml" />
|
||||
</MediaCodecs>
|
||||
+259
@@ -0,0 +1,259 @@
|
||||
<?xml version="1.0" encoding="utf-8" ?>
|
||||
<!--
|
||||
Copyright (c) 2018-2020 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
Not a Contribution.
|
||||
|
||||
Copyright (C) 2012-2018 The Linux Foundation. All rights reserved.
|
||||
Copyright (C) 2012-2013 The Android Open Source Project
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
-->
|
||||
|
||||
<!--
|
||||
Non-Secure decoder capabilities
|
||||
(MB is defined as 16x16)
|
||||
_____________________________________________________________________
|
||||
| Codec | W H fps Mbps MB/s Max MB/s|
|
||||
|_____________|_____________________________________________________|
|
||||
| | 4096 2304 60 220 2211840 |
|
||||
| | 4096 2160 96 220 3317760 |
|
||||
|h264/hevc/vp9| 3820 2160 120 220 3888000 |
|
||||
| | 1920 1088 480 220 3916800 3916800 |
|
||||
| | 1280 720 480 220 1728000 |
|
||||
| | 720 480 480 220 648000 |
|
||||
| | |
|
||||
| | 4096 2304 24 100 884736 |
|
||||
| | 4096 2160 30 100 1036800 |
|
||||
| vp8 | 3840 2160 30 100 972000 1036800 |
|
||||
| | 1920 1088 120 100 979200 |
|
||||
| | 1280 720 240 100 864000 |
|
||||
| | 1280 720 240 100 864000 |
|
||||
|_____________|_____________________________________________________|
|
||||
|
||||
Secure decoder capabilities
|
||||
(MB is defined as 16x16)
|
||||
____________________________________________________________________
|
||||
| Codec | W H fps Mbps MB/s Max MB/s|
|
||||
|_____________|_____________________________________________________|
|
||||
| | 4096 2304 30 40 1105920 |
|
||||
| | 4096 2160 60 40 2073600 |
|
||||
|h264/hevc/vp9| 3840 2160 60 40 1944000 2073600 |
|
||||
| | 1920 1088 60 40 489600 |
|
||||
| | 1280 720 60 40 216000 |
|
||||
|_____________|_____________________________________________________|
|
||||
|
||||
Non-Secure encoder capabilities (Secure not supported)
|
||||
(MB is defined as 16x16)
|
||||
__________________________________________________________________
|
||||
| Codec | W H fps Mbps MB/s Max MB/s|
|
||||
|__________|_____________________________________________________|
|
||||
| | 4096 2304 56 160 2064384 |
|
||||
| | 4096 2160 60 160 2073600 |
|
||||
|h264/hevc | 3840 2160 60 160 1944000 2073600 |
|
||||
| | 1920 1088 240 160 1958400 |
|
||||
| | 1280 720 480 160 1728000 |
|
||||
| | 720 480 480 160 648000 |
|
||||
| | |
|
||||
|
||||
| | 8192 4320 3 160 138240 |
|
||||
| | 7680 4320 3 160 138240 |
|
||||
| | 4096 2304 12 160 307200 |
|
||||
| heic | 4096 2160 12 160 307200 2073600 |
|
||||
| | 3840 2160 12 160 307200 |
|
||||
| | 1920 1088 40 160 1944000 |
|
||||
| | 1280 720 80 160 819200 |
|
||||
| | 720 480 240 160 1228800 |
|
||||
| | |
|
||||
| | 4096 2304 24 40 884736 |
|
||||
| | 4096 2160 30 40 1036800 |
|
||||
| vp8 | 3840 2160 30 40 972000 1036800 |
|
||||
| | 1920 1088 120 40 979200 |
|
||||
| | 1280 720 240 40 864000 |
|
||||
| | 720 480 240 40 648000 |
|
||||
|__________|_____________________________________________________|
|
||||
-->
|
||||
<Included>
|
||||
<Decoders>
|
||||
<MediaCodec name="c2.qti.hevc.decoder" type="video/hevc" >
|
||||
<Alias name="OMX.qcom.video.decoder.hevc" />
|
||||
<Limit name="size" min="96x96" max="4096x4096" />
|
||||
<Limit name="block-count" range="36-36864" /> <!--max-spatial: 4096x2304 -->
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" range="1-3916800" />
|
||||
<Limit name="bitrate" range="1-220000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="60" />
|
||||
<Limit name="performance-point-4096x2160" value="96" />
|
||||
<Limit name="performance-point-3840x2160" value="120" />
|
||||
<Limit name="performance-point-1920x1088" range="480" />
|
||||
<Limit name="performance-point-1920x1088" range="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
<Feature name="adaptive-playback" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.qti.hevc.decoder.secure" type="video/hevc" >
|
||||
<Alias name="OMX.qcom.video.decoder.hevc.secure" />
|
||||
<Limit name="size" min="96x96" max="4096x4096" />
|
||||
<Limit name="block-count" range="36-36864" /> <!--max-spatial: 4096x2304 -->
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="24" max="2073600" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-60" />
|
||||
<Limit name="concurrent-instances" max="4" />
|
||||
<Limit name="performance-point-4096x2304" value="30" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Feature name="secure-playback" required="true" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.qti.vp8.decoder" type="video/x-vnd.on2.vp8" >
|
||||
<Alias name="OMX.qcom.video.decoder.vp8" />
|
||||
<Limit name="size" min="96x96" max="4096x4096" />
|
||||
<Limit name="block-count" range="36-36864" /> <!--max-spatial: 4096x2304 -->
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" range="1-1036800" />
|
||||
<Limit name="bitrate" range="1-100000000" />
|
||||
<Limit name="frame-rate" range="1-240" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="24" />
|
||||
<Limit name="performance-point-4096x2160" value="30" />
|
||||
<Limit name="performance-point-3840x2160" value="30" />
|
||||
<Limit name="performance-point-1920x1080" value="120" />
|
||||
<Limit name="performance-point-1280x720" value="240" />
|
||||
<Feature name="adaptive-playback" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.qti.vp9.decoder" type="video/x-vnd.on2.vp9" >
|
||||
<Alias name="OMX.qcom.video.decoder.vp9" />
|
||||
<Limit name="size" min="96x96" max="4096x4096" />
|
||||
<Limit name="block-count" range="36-36864" /> <!--max-spatial: 4096x2304 -->
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" range="1-3916800" />
|
||||
<Limit name="bitrate" range="1-220000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Limit name="concurrent-instances" max="6" />
|
||||
<Limit name="performance-point-4096x2304" value="60" />
|
||||
<Limit name="performance-point-4096x2160" value="96" />
|
||||
<Limit name="performance-point-3840x2160" value="120" />
|
||||
<Limit name="performance-point-1920x1088" range="480" />
|
||||
<Limit name="performance-point-1920x1088" range="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
<Feature name="adaptive-playback" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.qti.vp9.decoder.secure" type="video/x-vnd.on2.vp9" >
|
||||
<Alias name="OMX.qcom.video.decoder.vp9.secure" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="block-count" range="36-36864" /> <!--max-spatial: 4096x2304 -->
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="24" max="2073600" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Limit name="concurrent-instances" max="4" />
|
||||
<Limit name="performance-point-4096x2304" value="30" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Feature name="secure-playback" required="true" />
|
||||
</MediaCodec>
|
||||
</Decoders>
|
||||
|
||||
<Encoders>
|
||||
<MediaCodec name="c2.qti.avc.encoder" type="video/avc">
|
||||
<Alias name="OMX.qcom.video.encoder.avc" />
|
||||
<Limit name="size" min="96x96" max="4096x4096" />
|
||||
<Limit name="block-count" range="36-36864" /> <!--max-spatial: 4096x2304 -->
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="24" max="2073600" />
|
||||
<Limit name="bitrate" range="1-160000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="56" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
<Limit name="performance-point-1920x1080" value="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
<Feature name="bitrate-modes" value="VBR,CBR" />
|
||||
<Feature name="intra-refresh" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.qti.hevc.encoder" type="video/hevc">
|
||||
<Alias name="OMX.qcom.video.encoder.hevc" />
|
||||
<Limit name="size" min="96x96" max="4096x4096" />
|
||||
<Limit name="block-count" range="36-36864" /> <!--max-spatial: 4096x2304 -->
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="24" max="2073600" />
|
||||
<Limit name="bitrate" range="1-160000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="56" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
<Limit name="performance-point-1920x1080" value="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
<Feature name="bitrate-modes" value="VBR,CBR" />
|
||||
<Feature name="intra-refresh" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.qti.hevc.encoder.cq" type="video/hevc">
|
||||
<Limit name="size" min="96x96" max="512x512" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="24" max="2073600" />
|
||||
<Limit name="bitrate" range="1-160000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="quality" range="0-100" default="80" />
|
||||
<Limit name="performance-point-512x512" value="480" />
|
||||
<Feature name="bitrate-modes" value="VBR,CBR,CQ" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.qti.heic.encoder" type="image/vnd.android.heic">
|
||||
<Limit name="size" min="96x96" max="8192x8192" />
|
||||
<Limit name="block-count" range="1024-138240" /> <!--max-spatial: 8192x4320 -->
|
||||
<Limit name="blocks-per-second" min="24" max="2073600" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Limit name="concurrent-instances" max="6" />
|
||||
<Limit name="quality" range="0-100" default="80" />
|
||||
<Limit name="performance-point-8192x4320" value="3" />
|
||||
<Limit name="performance-point-4096x2304" value="12" />
|
||||
<Limit name="performance-point-1920x1080" value="40" />
|
||||
<Limit name="performance-point-1920x1080" value="30" />
|
||||
<Limit name="performance-point-1280x720" value="80" />
|
||||
<Limit name="performance-point-1280x720" value="60" />
|
||||
<Feature name="bitrate-modes" value="CQ" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.qti.vp8.encoder" type="video/x-vnd.on2.vp8">
|
||||
<Alias name="OMX.qcom.video.encoder.vp8" />
|
||||
<Limit name="size" min="96x96" max="4096x4096" />
|
||||
<Limit name="block-count" range="36-36864" /> <!--max-spatial: 4096x2304 -->
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="24" max="1036800" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-240" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="24" />
|
||||
<Limit name="performance-point-4096x2160" value="30" />
|
||||
<Limit name="performance-point-3840x2160" value="30" />
|
||||
<Limit name="performance-point-1920x1080" value="120" />
|
||||
<Limit name="performance-point-1280x720" value="240" />
|
||||
<Feature name="intra-refresh" />
|
||||
</MediaCodec>
|
||||
</Encoders>
|
||||
</Included>
|
||||
+220
@@ -0,0 +1,220 @@
|
||||
<?xml version="1.0" encoding="utf-8" ?>
|
||||
<!--
|
||||
Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
|
||||
|
||||
Not a Contribution.
|
||||
|
||||
Copyright 2015 The Android Open Source Project
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
u may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
-->
|
||||
|
||||
<MediaCodecs>
|
||||
<Encoders>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.avc" type="video/avc" update="true">
|
||||
<Limit name="measured-frame-rate-320x240" range="238-238" />
|
||||
<Limit name="measured-frame-rate-720x480" range="277-287" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="46-102" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="116-118" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.hevc" type="video/hevc" update="true">
|
||||
<Limit name="measured-frame-rate-320x240" range="226-226" />
|
||||
<Limit name="measured-frame-rate-720x480" range="336-339" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="183-194" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="91-104" />
|
||||
<Limit name="measured-frame-rate-3840x2160" range="37-40" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.hevc.cq" type="video/hevc" update="true">
|
||||
<Limit name="measured-frame-rate-320x240" range="340-400" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.h263sw" type="video/3gpp" update="true">
|
||||
<Limit name="measured-frame-rate-176x144" range="303-303" />
|
||||
<Limit name="measured-frame-rate-352x288" range="32-630" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.mpeg4sw" type="video/mp4v-es" update="true">
|
||||
<Limit name="measured-frame-rate-176x144" range="299-299" />
|
||||
<Limit name="measured-frame-rate-352x288" range="30-581" />
|
||||
<Limit name="measured-frame-rate-640x480" range="148-148" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.vp8" type="video/x-vnd.on2.vp8" update="true">
|
||||
<Limit name="measured-frame-rate-320x180" range="363-484" />
|
||||
<Limit name="measured-frame-rate-640x360" range="250-280" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="123-125" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="16-40" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.qti.avc.encoder" type="video/avc" update="true">
|
||||
<Limit name="measured-frame-rate-320x240" range="106-234" />
|
||||
<Limit name="measured-frame-rate-720x480" range="64-140" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="26-56" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="20-44" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.google.h264.encoder" type="video/avc" update="true">
|
||||
<Limit name="measured-frame-rate-320x240" range="215-215" />
|
||||
<Limit name="measured-frame-rate-720x480" range="100-100" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="56-56" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="30-30" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.google.h263.encoder" type="video/3gpp" update="true">
|
||||
<Limit name="measured-frame-rate-176x144" range="310-410" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.google.mpeg4.encoder" type="video/mp4v-es" update="true">
|
||||
<Limit name="measured-frame-rate-176x144" range="390-480" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.google.vp8.encoder" type="video/x-vnd.on2.vp8" update="true">
|
||||
<Limit name="measured-frame-rate-320x180" range="93-94" />
|
||||
<Limit name="measured-frame-rate-640x360" range="32-32" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="17-24" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="16-20" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.android.hevc.encoder" type="video/hevc" update="true">
|
||||
<Limit name="measured-frame-rate-320x240" range="22-35" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.android.h263.encoder" type="video/3gpp" update="true">
|
||||
<Limit name="measured-frame-rate-176x144" range="287-459" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.android.avc.encoder" type="video/avc" update="true">
|
||||
<Limit name="measured-frame-rate-320x240" range="151-208" />
|
||||
<Limit name="measured-frame-rate-720x480" range="61-84" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="41-57" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="28-39" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.android.mpeg4.encoder" type="video/mp4v-es" update="true">
|
||||
<Limit name="measured-frame-rate-176x144" range="251-350" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.android.vp8.encoder" type="video/x-vnd.on2.vp8" update="true">
|
||||
<Limit name="measured-frame-rate-320x180" range="228-318" />
|
||||
<Limit name="measured-frame-rate-640x360" range="150-233" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="43-61" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="19-27" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.android.vp9.encoder" type="video/x-vnd.on2.vp9" update="true">
|
||||
<Limit name="measured-frame-rate-320x180" range="109-109" />
|
||||
<Limit name="measured-frame-rate-640x360" range="61-61" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="20-20" />
|
||||
</MediaCodec>
|
||||
</Encoders>
|
||||
<Decoders>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.avc" type="video/avc" update="true">
|
||||
<Limit name="measured-frame-rate-320x240" range="960-1268" />
|
||||
<Limit name="measured-frame-rate-720x480" range="857-1104" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="163-360" />
|
||||
<Limit name="measured-frame-rate-1920x1088" range="246-250" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.hevc" type="video/hevc" update="true">
|
||||
<Limit name="measured-frame-rate-352x288" range="784-1700" />
|
||||
<Limit name="measured-frame-rate-720x480" range="1046-1157" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="290-641" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="316-318" />
|
||||
<Limit name="measured-frame-rate-3840x2160" range="148-149" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qti.video.decoder.h263sw" type="video/3gpp" update="true">
|
||||
<Limit name="measured-frame-rate-176x144" range="268-418" />
|
||||
<Limit name="measured-frame-rate-352x288" range="273-561" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qti.video.decoder.mpeg4sw" type="video/mp4v-es" update="true">
|
||||
<Limit name="measured-frame-rate-176x144" range="409-410" />
|
||||
<Limit name="measured-frame-rate-480x360" range="436-524" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="240-292" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.vp8" type="video/x-vnd.on2.vp8" update="true">
|
||||
<Limit name="measured-frame-rate-320x180" range="326-719" />
|
||||
<Limit name="measured-frame-rate-320x240" range="337-337" />
|
||||
<Limit name="measured-frame-rate-640x360" range="330-750" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="337-820" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="248-248" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.vp9" type="video/x-vnd.on2.vp9" update="true">
|
||||
<Limit name="measured-frame-rate-320x240" range="1103-1262" />
|
||||
<Limit name="measured-frame-rate-640x360" range="347-783" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="579-594" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="496-518" />
|
||||
<Limit name="measured-frame-rate-3840x2160" range="139-139" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.qti.avc.decoder" type="video/avc" update="true">
|
||||
<Limit name="measured-frame-rate-320x240" range="220-630" />
|
||||
<Limit name="measured-frame-rate-720x480" range="250-513" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="200-420" />
|
||||
<Limit name="measured-frame-rate-1920x1088" range="189-301" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.google.h264.decoder" type="video/avc" update="true">
|
||||
<Limit name="measured-frame-rate-320x240" range="122-370" />
|
||||
<Limit name="measured-frame-rate-720x480" range="135-310" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="32-32" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="24-26" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.google.h263.decoder" type="video/3gpp" update="true">
|
||||
<Limit name="measured-frame-rate-176x144" range="104-279" />
|
||||
<Limit name="measured-frame-rate-352x288" range="200-200" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.google.hevc.decoder" type="video/hevc" update="true">
|
||||
<Limit name="measured-frame-rate-352x288" range="502-550" />
|
||||
<Limit name="measured-frame-rate-640x360" range="267-271" />
|
||||
<Limit name="measured-frame-rate-720x480" range="254-257" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="94-95" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="47-49" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.google.mpeg4.decoder" update="true">
|
||||
<Type name="video/mp4v-es">
|
||||
<Limit name="measured-frame-rate-176x144" range="430-450" />
|
||||
</Type>
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.google.vp8.decoder" type="video/x-vnd.on2.vp8" update="true">
|
||||
<Limit name="measured-frame-rate-320x180" range="1103-1170" />
|
||||
<Limit name="measured-frame-rate-320x240" range="330-381" />
|
||||
<Limit name="measured-frame-rate-640x360" range="487-490" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="22-38" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="39-40" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.google.vp9.decoder" type="video/x-vnd.on2.vp9" update="true">
|
||||
<Limit name="measured-frame-rate-320x180" range="861-909" />
|
||||
<Limit name="measured-frame-rate-320x240" range="200-230" />
|
||||
<Limit name="measured-frame-rate-640x360" range="265-268" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="83-190" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="48-140" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.android.avc.decoder" type="video/avc" update="true">
|
||||
<Limit name="measured-frame-rate-320x240" range="196-760" />
|
||||
<Limit name="measured-frame-rate-720x480" range="56-77" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="21-33" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="12-17" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.android.hevc.decoder" type="video/hevc" update="true">
|
||||
<Limit name="measured-frame-rate-352x288" range="179-740" />
|
||||
<Limit name="measured-frame-rate-640x360" range="120-164" />
|
||||
<Limit name="measured-frame-rate-720x480" range="111-410" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="61-83" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="36-49" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.android.vp8.decoder" type="video/x-vnd.on2.vp8" update="true">
|
||||
<Limit name="measured-frame-rate-320x180" range="1400-1500" />
|
||||
<Limit name="measured-frame-rate-640x360" range="222-302" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="107-145" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="31-43" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.android.vp9.decoder" type="video/x-vnd.on2.vp9" update="true">
|
||||
<Limit name="measured-frame-rate-320x180" range="415-575" />
|
||||
<Limit name="measured-frame-rate-640x360" range="200-450" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="44-60" />
|
||||
<Limit name="measured-frame-rate-1920x1080" range="28-38" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.android.h263.decoder" type="video/3gpp" update="true">
|
||||
<Limit name="measured-frame-rate-176x144" range="1465-2105" />
|
||||
<Limit name="measured-frame-rate-352x288" range="324-769" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="c2.android.mpeg4.decoder" type="video/mp4v-es" update="true">
|
||||
<Limit name="measured-frame-rate-176x144" range="1360-2145" />
|
||||
<Limit name="measured-frame-rate-480x360" range="800-1900" />
|
||||
<Limit name="measured-frame-rate-1280x720" range="300-650" />
|
||||
</MediaCodec>
|
||||
</Decoders>
|
||||
</MediaCodecs>
|
||||
+485
@@ -0,0 +1,485 @@
|
||||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!-- Copyright (C) 2012-2020 The Linux Foundation. All rights reserved.
|
||||
Not a contribution.
|
||||
Copyright (C) 2012-2013 The Android Open Source Project
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
-->
|
||||
|
||||
<!--
|
||||
<!DOCTYPE MediaCodecs [
|
||||
<!ELEMENT Include EMPTY>
|
||||
<!ATTLIST Include href CDATA #REQUIRED>
|
||||
<!ELEMENT MediaCodecs (Decoders|Encoders|Include)*>
|
||||
<!ELEMENT Decoders (MediaCodec|Include)*>
|
||||
<!ELEMENT Encoders (MediaCodec|Include)*>
|
||||
<!ELEMENT MediaCodec (Type|Quirk|Include)*>
|
||||
<!ATTLIST MediaCodec name CDATA #REQUIRED>
|
||||
<!ATTLIST MediaCodec type CDATA>
|
||||
<!ELEMENT Type EMPTY>
|
||||
<!ATTLIST Type name CDATA #REQUIRED>
|
||||
<!ELEMENT Quirk EMPTY>
|
||||
<!ATTLIST Quirk name CDATA #REQUIRED>
|
||||
]>
|
||||
|
||||
There's a simple and a complex syntax to declare the availability of a
|
||||
media codec:
|
||||
|
||||
A codec that properly follows the OpenMax spec and therefore doesn't have any
|
||||
quirks and that only supports a single content type can be declared like so:
|
||||
|
||||
<MediaCodec name="OMX.foo.bar" type="something/interesting" />
|
||||
|
||||
If a codec has quirks OR supports multiple content types, the following syntax
|
||||
can be used:
|
||||
|
||||
<MediaCodec name="OMX.foo.bar" >
|
||||
<Type name="something/interesting" />
|
||||
<Type name="something/else" />
|
||||
...
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="output-buffers-are-unreadable" />
|
||||
</MediaCodec>
|
||||
|
||||
Only the three quirks included above are recognized at this point:
|
||||
|
||||
"requires-allocate-on-input-ports"
|
||||
must be advertised if the component does not properly support specification
|
||||
of input buffers using the OMX_UseBuffer(...) API but instead requires
|
||||
OMX_AllocateBuffer to be used.
|
||||
|
||||
"requires-allocate-on-output-ports"
|
||||
must be advertised if the component does not properly support specification
|
||||
of output buffers using the OMX_UseBuffer(...) API but instead requires
|
||||
OMX_AllocateBuffer to be used.
|
||||
|
||||
"output-buffers-are-unreadable"
|
||||
must be advertised if the emitted output buffers of a decoder component
|
||||
are not readable, i.e. use a custom format even though abusing one of
|
||||
the official OMX colorspace constants.
|
||||
Clients of such decoders will not be able to access the decoded data,
|
||||
naturally making the component much less useful. The only use for
|
||||
a component with this quirk is to render the output to the screen.
|
||||
Audio decoders MUST NOT advertise this quirk.
|
||||
Video decoders that advertise this quirk must be accompanied by a
|
||||
corresponding color space converter for thumbnail extraction,
|
||||
matching surfaceflinger support that can render the custom format to
|
||||
a texture and possibly other code, so just DON'T USE THIS QUIRK.
|
||||
|
||||
|
||||
-->
|
||||
|
||||
<!--
|
||||
Non-Secure decoder capabilities
|
||||
(MB is defined as 16x16)
|
||||
_____________________________________________________________________
|
||||
| Codec | W H fps Mbps MB/s Max MB/s|
|
||||
|_____________|_____________________________________________________|
|
||||
| h264 | 1920 1088 480 220 3916800 3916800 |
|
||||
| | 3820 2160 120 220 3888000 |
|
||||
| | 4096 2160 96 220 3317760 |
|
||||
| | 4096 2304 60 220 2211840 |
|
||||
| | 7680 4320 30 220 3888000 |
|
||||
| | 8192 4320 24 220 3317760 |
|
||||
| hevc | 1920 1088 480 220 3916800 3916800 |
|
||||
| | 3820 2160 120 220 3888000 |
|
||||
| | 4096 2160 96 220 3317760 |
|
||||
| | 4096 2304 60 220 2211840 |
|
||||
| | 7680 4320 30 220 3888000 |
|
||||
| | 8192 4320 24 220 3317760 |
|
||||
| mpeg4-sw | 1920 1088 30 40 244800 244800 |
|
||||
| vp8 | 1280 720 240 100 864000 1036800 |
|
||||
| | 1920 1088 120 100 979200 |
|
||||
| | 3840 2160 30 100 972000 |
|
||||
| | 4096 2160 30 100 1036800 |
|
||||
| | 4096 2304 24 100 884736 |
|
||||
| vp9 | 1920 1088 480 220 3916800 3916800 |
|
||||
| | 3820 2160 120 220 3888000 |
|
||||
| | 4096 2160 96 220 3317760 |
|
||||
| | 4096 2304 60 220 2211840 |
|
||||
| | 7680 4320 30 220 3888000 |
|
||||
| | 8192 4320 24 220 3317760 |
|
||||
| vc1 | 1920 1088 30 20 244800 244800 |
|
||||
| h263-sw | 864 480 30 16 48600 48600 |
|
||||
| mpeg2 | 1920 1088 30 40 244800 244800 |
|
||||
|_____________|_____________________________________________________|
|
||||
|
||||
Secure decoder capabilities
|
||||
(MB is defined as 16x16)
|
||||
__________________________________________________________________
|
||||
| Codec | W H fps Mbps MB/s Max MB/s|
|
||||
|__________|_____________________________________________________|
|
||||
| h264 | 1280 720 60 40 216000 2073600 |
|
||||
| | 1920 1088 60 40 489600 |
|
||||
| | 3840 2160 60 40 1944000 |
|
||||
| | 4096 2160 60 40 2073600 |
|
||||
| | 4096 2304 30 40 1105920 |
|
||||
| hevc | 1280 720 60 40 216000 2073600 |
|
||||
| | 1920 1088 60 40 489600 |
|
||||
| | 3840 2160 60 40 1944000 |
|
||||
| | 4096 2160 60 40 2073600 |
|
||||
| | 4096 2304 30 40 1105920 |
|
||||
| vp9 | 1280 720 60 40 216000 2073600 |
|
||||
| | 1920 1088 60 40 489600 |
|
||||
| | 3840 2160 60 40 1944000 |
|
||||
| | 4096 2160 60 40 2073600 |
|
||||
| | 4096 2304 30 40 1105920 |
|
||||
| mpeg2 | 1920 1088 30 40 244800 244800 |
|
||||
|__________|_____________________________________________________|
|
||||
|
||||
Non-Secure encoder capabilities (Secure not supported)
|
||||
(MB is defined as 16x16)
|
||||
__________________________________________________________________
|
||||
| Codec | W H fps Mbps MB/s Max MB/s|
|
||||
|__________|_____________________________________________________|
|
||||
| h264 | 1280 720 480 160 1728000 1958400 |
|
||||
| | 1920 1088 240 160 1958400 |
|
||||
| | 3840 2160 60 160 1944000 |
|
||||
| | 4096 2160 48 160 1658880 |
|
||||
| | 4096 2304 30 160 1105920 |
|
||||
| hevc | 1280 720 480 160 1728000 1958400 |
|
||||
| | 1920 1088 240 160 1958400 |
|
||||
| | 3840 2160 60 160 1944000 |
|
||||
| | 4096 2160 48 160 1658880 |
|
||||
| | 4096 2304 30 160 1105920 |
|
||||
| mpeg4-sw | 1280 720 30 4 108000 108000 |
|
||||
| vp8 | 1280 720 240 40 864000 1036800 |
|
||||
| | 1920 1088 120 40 979200 |
|
||||
| | 3840 2160 30 40 972000 |
|
||||
| | 4096 2160 30 40 1036800 |
|
||||
| | 4096 2304 24 40 884736 |
|
||||
| h263-sw | 864 480 30 2 48600 48600 |
|
||||
|__________|_____________________________________________________|
|
||||
-->
|
||||
|
||||
<MediaCodecs>
|
||||
<Include href="media_codecs_google_audio.xml" />
|
||||
<Include href="media_codecs_vendor_audio.xml" />
|
||||
<Include href="media_codecs_google_telephony.xml" />
|
||||
<Settings>
|
||||
<Setting name="max-video-encoder-input-buffers" value="11" />
|
||||
</Settings>
|
||||
<Encoders>
|
||||
<!-- Video Hardware -->
|
||||
<MediaCodec name="OMX.qcom.video.encoder.avc" type="video/avc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="1958400" />
|
||||
<Limit name="bitrate" range="1-160000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="56" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
<Limit name="performance-point-1920x1080" value="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.vp8" type="video/x-vnd.on2.vp8" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="1036800" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-240" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="24" />
|
||||
<Limit name="performance-point-4096x2160" value="30" />
|
||||
<Limit name="performance-point-3840x2160" value="30" />
|
||||
<Limit name="performance-point-1920x1080" value="120" />
|
||||
<Limit name="performance-point-1280x720" value="240" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.hevc" type="video/hevc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="1958400" />
|
||||
<Limit name="bitrate" range="1-160000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="quality" range="0-100" default="80" />
|
||||
<Limit name="performance-point-4096x2304" value="56" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
<Limit name="performance-point-1920x1080" value="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
<Feature name="bitrate-modes" value="VBR,CBR" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.hevc.cq" type="video/hevc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="96x96" max="512x512" />
|
||||
<Limit name="frame-rate" range="1-20" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="quality" range="0-100" default="80" />
|
||||
<Limit name="performance-point-512x512" value="480" />
|
||||
<Feature name="bitrate-modes" value="CQ" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.heic" type="image/vnd.android.heic" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="512x512" max="8192x8192" />
|
||||
<Limit name="frame-rate" range="1-20" />
|
||||
<Limit name="concurrent-instances" max="6" />
|
||||
<Limit name="quality" range="0-100" default="80" />
|
||||
<Limit name="performance-point-8192x4320" value="3" />
|
||||
<Limit name="performance-point-4096x2304" value="12" />
|
||||
<Limit name="performance-point-1920x1080" value="40" />
|
||||
<Limit name="performance-point-1920x1080" value="30" />
|
||||
<Limit name="performance-point-1280x720" value="80" />
|
||||
<Limit name="performance-point-1280x720" value="60" />
|
||||
<Feature name="bitrate-modes" value="CQ" />
|
||||
</MediaCodec>
|
||||
<!-- Video Software -->
|
||||
<MediaCodec name="OMX.qcom.video.encoder.h263sw" type="video/3gpp" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="96x96" max="864x480" />
|
||||
<Limit name="alignment" value="4x4" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="48600" />
|
||||
<Limit name="bitrate" range="1-2000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-720x480" value="30" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.encoder.mpeg4sw" type="video/mp4v-es" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Quirk name="requires-loaded-to-idle-after-allocation" />
|
||||
<Limit name="size" min="96x96" max="1280x720" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="108000" />
|
||||
<Limit name="bitrate" range="1-4000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-1280x720" value="30" />
|
||||
<Attribute name="software-codec" />
|
||||
</MediaCodec>
|
||||
</Encoders>
|
||||
<Decoders>
|
||||
<!-- Video Hardware -->
|
||||
<MediaCodec name="OMX.qcom.video.decoder.avc" type="video/avc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="8192x4320" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="3916800" />
|
||||
<Limit name="bitrate" range="1-220000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="60" />
|
||||
<Limit name="performance-point-4096x2160" value="96" />
|
||||
<Limit name="performance-point-3840x2160" value="120" />
|
||||
<Limit name="performance-point-1920x1088" range="480" />
|
||||
<Limit name="performance-point-1920x1088" range="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.avc.secure" type="video/avc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="2073600" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-60" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Feature name="secure-playback" required="true" />
|
||||
<Limit name="concurrent-instances" max="3" />
|
||||
<Limit name="performance-point-4096x2304" value="30" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.mpeg2" type="video/mpeg2" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="1920x1088" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="244800" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-1920x1080" value="30" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.mpeg2.secure" type="video/mpeg2" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="1920x1088" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="244800" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Feature name="secure-playback" required="true" />
|
||||
<Limit name="concurrent-instances" max="3" />
|
||||
<Limit name="performance-point-1920x1080" value="30" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.vp8" type="video/x-vnd.on2.vp8" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="1036800" />
|
||||
<Limit name="bitrate" range="1-100000000" />
|
||||
<Limit name="frame-rate" range="1-240" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="24" />
|
||||
<Limit name="performance-point-4096x2160" value="30" />
|
||||
<Limit name="performance-point-3840x2160" value="30" />
|
||||
<Limit name="performance-point-1920x1080" value="120" />
|
||||
<Limit name="performance-point-1280x720" value="240" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.vp9" type="video/x-vnd.on2.vp9" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="8192x4320" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="3916800" />
|
||||
<Limit name="bitrate" range="1-220000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="6" />
|
||||
<Limit name="performance-point-4096x2304" value="60" />
|
||||
<Limit name="performance-point-4096x2160" value="96" />
|
||||
<Limit name="performance-point-3840x2160" value="120" />
|
||||
<Limit name="performance-point-1920x1088" range="480" />
|
||||
<Limit name="performance-point-1920x1088" range="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.vp9.secure" type="video/x-vnd.on2.vp9" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="2073600" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-60" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Feature name="secure-playback" required="true" />
|
||||
<Limit name="concurrent-instances" max="3" />
|
||||
<Limit name="performance-point-4096x2304" value="30" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.hevc" type="video/hevc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="8192x4320" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="3916800" />
|
||||
<Limit name="bitrate" range="1-220000000" />
|
||||
<Limit name="frame-rate" range="1-480" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-4096x2304" value="60" />
|
||||
<Limit name="performance-point-4096x2160" value="96" />
|
||||
<Limit name="performance-point-3840x2160" value="120" />
|
||||
<Limit name="performance-point-1920x1088" range="480" />
|
||||
<Limit name="performance-point-1920x1088" range="240" />
|
||||
<Limit name="performance-point-1280x720" value="480" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qcom.video.decoder.hevc.secure" type="video/hevc" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="4096x2304" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="2073600" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-60" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Feature name="secure-playback" required="true" />
|
||||
<Limit name="concurrent-instances" max="3" />
|
||||
<Limit name="performance-point-4096x2304" value="30" />
|
||||
<Limit name="performance-point-4096x2160" value="60" />
|
||||
<Limit name="performance-point-3840x2160" value="60" />
|
||||
</MediaCodec>
|
||||
<!-- Video Software -->
|
||||
<MediaCodec name="OMX.qti.video.decoder.h263sw" type="video/3gpp" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="864x480" />
|
||||
<Limit name="alignment" value="4x4" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="48600" />
|
||||
<Limit name="bitrate" range="1-16000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-720x480" value="30" />
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qti.video.decoder.mpeg4sw">
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Type name="video/mp4v-es">
|
||||
<Limit name="size" min="96x96" max="1920x1088" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="244800" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-1920x1080" value="30" />
|
||||
</Type>
|
||||
<Type name="video/mp4v-esdp">
|
||||
<Limit name="size" min="96x96" max="1920x1088" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="244800" />
|
||||
<Limit name="bitrate" range="1-40000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-1920x1080" value="30" />
|
||||
</Type>
|
||||
</MediaCodec>
|
||||
<MediaCodec name="OMX.qti.video.decoder.vc1sw" type="video/x-ms-wmv" >
|
||||
<Quirk name="requires-allocate-on-input-ports" />
|
||||
<Quirk name="requires-allocate-on-output-ports" />
|
||||
<Limit name="size" min="96x96" max="1920x1088" />
|
||||
<Limit name="alignment" value="2x2" />
|
||||
<Limit name="block-size" value="16x16" />
|
||||
<Limit name="blocks-per-second" min="36" max="244800" />
|
||||
<Limit name="bitrate" range="1-20000000" />
|
||||
<Limit name="frame-rate" range="1-30" />
|
||||
<Feature name="adaptive-playback" />
|
||||
<Limit name="concurrent-instances" max="16" />
|
||||
<Limit name="performance-point-1920x1080" value="30" />
|
||||
</MediaCodec>
|
||||
</Decoders>
|
||||
<Include href="media_codecs_google_video.xml" />
|
||||
</MediaCodecs>
|
||||
@@ -0,0 +1,24 @@
|
||||
<?xml version="1.0" encoding="utf-8" ?>
|
||||
<!-- Copyright (C) 2015-2020 The Linux Foundation. All rights reserved.
|
||||
Not a contribution.
|
||||
Copyright (C) 2012 The Android Open Source Project
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
-->
|
||||
<Included>
|
||||
<Decoders>
|
||||
<MediaCodec name="OMX.google.opus.decoder" type="audio/opus" update="true" rank="100"/>
|
||||
<MediaCodec name="OMX.google.raw.decoder" type="audio/raw" update="true" rank="1"/>
|
||||
<!-- SimpleOMXComponet based software decoder-->
|
||||
</Decoders>
|
||||
</Included>
|
||||
+867
@@ -0,0 +1,867 @@
|
||||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!-- Copyright 2013 The Android Open Source Project
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
-->
|
||||
<!DOCTYPE MediaSettings [
|
||||
<!ELEMENT MediaSettings (CamcorderProfiles,
|
||||
EncoderOutputFileFormat+,
|
||||
VideoEncoderCap+,
|
||||
AudioEncoderCap+,
|
||||
VideoDecoderCap,
|
||||
AudioDecoderCap)>
|
||||
<!ELEMENT CamcorderProfiles (EncoderProfile+, ImageEncoding+, ImageDecoding, Camera)>
|
||||
<!ELEMENT EncoderProfile (Video, Audio)>
|
||||
<!ATTLIST EncoderProfile quality (high|low) #REQUIRED>
|
||||
<!ATTLIST EncoderProfile fileFormat (mp4|3gp) #REQUIRED>
|
||||
<!ATTLIST EncoderProfile duration (30|60) #REQUIRED>
|
||||
<!ATTLIST EncoderProfile cameraId (0|1|2|3|4|5) #REQUIRED>
|
||||
<!ELEMENT Video EMPTY>
|
||||
<!ATTLIST Video codec (h264|h263|m4v) #REQUIRED>
|
||||
<!ATTLIST Video bitRate CDATA #REQUIRED>
|
||||
<!ATTLIST Video width CDATA #REQUIRED>
|
||||
<!ATTLIST Video height CDATA #REQUIRED>
|
||||
<!ATTLIST Video frameRate CDATA #REQUIRED>
|
||||
<!ELEMENT Audio EMPTY>
|
||||
<!ATTLIST Audio codec (amrnb|amrwb|aac) #REQUIRED>
|
||||
<!ATTLIST Audio bitRate CDATA #REQUIRED>
|
||||
<!ATTLIST Audio sampleRate CDATA #REQUIRED>
|
||||
<!ATTLIST Audio channels (1|2) #REQUIRED>
|
||||
<!ELEMENT ImageEncoding EMPTY>
|
||||
<!ATTLIST ImageEncoding quality (90|80|70|60|50|40) #REQUIRED>
|
||||
<!ELEMENT ImageDecoding EMPTY>
|
||||
<!ATTLIST ImageDecoding memCap CDATA #REQUIRED>
|
||||
<!ELEMENT Camera EMPTY>
|
||||
<!ELEMENT EncoderOutputFileFormat EMPTY>
|
||||
<!ATTLIST EncoderOutputFileFormat name (mp4|3gp) #REQUIRED>
|
||||
<!ELEMENT VideoEncoderCap EMPTY>
|
||||
<!ATTLIST VideoEncoderCap name (h264|h263|m4v|wmv) #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap enabled (true|false) #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap minBitRate CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxBitRate CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap minFrameWidth CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxFrameWidth CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap minFrameHeight CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxFrameHeight CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap minFrameRate CDATA #REQUIRED>
|
||||
<!ATTLIST VideoEncoderCap maxFrameRate CDATA #REQUIRED>
|
||||
<!ELEMENT AudioEncoderCap EMPTY>
|
||||
<!ATTLIST AudioEncoderCap name (amrnb|amrwb|aac|wma) #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap enabled (true|false) #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap minBitRate CDATA #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap maxBitRate CDATA #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap minSampleRate CDATA #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap maxSampleRate CDATA #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap minChannels (1|2) #REQUIRED>
|
||||
<!ATTLIST AudioEncoderCap maxChannels (1|2) #REQUIRED>
|
||||
<!ELEMENT VideoDecoderCap EMPTY>
|
||||
<!ATTLIST VideoDecoderCap name (wmv) #REQUIRED>
|
||||
<!ATTLIST VideoDecoderCap enabled (true|false) #REQUIRED>
|
||||
<!ELEMENT AudioDecoderCap EMPTY>
|
||||
<!ATTLIST AudioDecoderCap name (wma) #REQUIRED>
|
||||
<!ATTLIST AudioDecoderCap enabled (true|false) #REQUIRED>
|
||||
]>
|
||||
<!--
|
||||
This file is used to declare the multimedia profiles and capabilities
|
||||
on an android-powered device.
|
||||
-->
|
||||
<MediaSettings>
|
||||
<!-- Each camcorder profile defines a set of predefined configuration parameters -->
|
||||
<CamcorderProfiles cameraId="0">
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="3gp" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="128000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="17000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="17000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
|
||||
<CamcorderProfiles cameraId="1">
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="3gp" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="128000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
<CamcorderProfiles cameraId="2">
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="3gp" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="128000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="17000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="17000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
|
||||
<CamcorderProfiles cameraId="3">
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="3gp" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="128000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
<CamcorderProfiles cameraId="4">
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="3gp" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="128000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="17000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="17000000"
|
||||
width="1920"
|
||||
height="1080"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
|
||||
<CamcorderProfiles cameraId="5">
|
||||
|
||||
<EncoderProfile quality="qvga" fileFormat="3gp" duration="60">
|
||||
<Video codec="h264"
|
||||
bitRate="128000"
|
||||
width="320"
|
||||
height="240"
|
||||
frameRate="30" />
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="cif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="192000"
|
||||
width="176"
|
||||
height="144"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="amrnb"
|
||||
bitRate="12200"
|
||||
sampleRate="8000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="1200000"
|
||||
width="352"
|
||||
height="288"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="6000000"
|
||||
width="720"
|
||||
height="480"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
|
||||
<Video codec="h264"
|
||||
bitRate="12000000"
|
||||
width="1280"
|
||||
height="720"
|
||||
frameRate="30" />
|
||||
<!-- audio setting is ignored -->
|
||||
<Audio codec="aac"
|
||||
bitRate="96000"
|
||||
sampleRate="48000"
|
||||
channels="1" />
|
||||
</EncoderProfile>
|
||||
|
||||
<ImageEncoding quality="95" />
|
||||
<ImageEncoding quality="80" />
|
||||
<ImageEncoding quality="70" />
|
||||
<ImageDecoding memCap="20000000" />
|
||||
|
||||
</CamcorderProfiles>
|
||||
|
||||
<EncoderOutputFileFormat name="3gp" />
|
||||
<EncoderOutputFileFormat name="mp4" />
|
||||
|
||||
<!--
|
||||
If a codec is not enabled, it is invisible to the applications
|
||||
In other words, the applications won't be able to use the codec
|
||||
or query the capabilities of the codec at all if it is disabled
|
||||
-->
|
||||
<VideoEncoderCap name="h264" enabled="true"
|
||||
minBitRate="64000" maxBitRate="40000000"
|
||||
minFrameWidth="176" maxFrameWidth="1920"
|
||||
minFrameHeight="144" maxFrameHeight="1080"
|
||||
minFrameRate="15" maxFrameRate="30" />
|
||||
|
||||
<VideoEncoderCap name="h263" enabled="true"
|
||||
minBitRate="64000" maxBitRate="2000000"
|
||||
minFrameWidth="176" maxFrameWidth="800"
|
||||
minFrameHeight="144" maxFrameHeight="480"
|
||||
minFrameRate="15" maxFrameRate="30" />
|
||||
|
||||
<VideoEncoderCap name="m4v" enabled="true"
|
||||
minBitRate="64000" maxBitRate="40000000"
|
||||
minFrameWidth="176" maxFrameWidth="1920"
|
||||
minFrameHeight="144" maxFrameHeight="1080"
|
||||
minFrameRate="15" maxFrameRate="30" />
|
||||
|
||||
<AudioEncoderCap name="aac" enabled="true"
|
||||
minBitRate="758" maxBitRate="288000"
|
||||
minSampleRate="8000" maxSampleRate="48000"
|
||||
minChannels="1" maxChannels="2" />
|
||||
|
||||
<AudioEncoderCap name="heaac" enabled="true"
|
||||
minBitRate="8000" maxBitRate="64000"
|
||||
minSampleRate="16000" maxSampleRate="48000"
|
||||
minChannels="1" maxChannels="2" />
|
||||
|
||||
<AudioEncoderCap name="aaceld" enabled="true"
|
||||
minBitRate="16000" maxBitRate="192000"
|
||||
minSampleRate="16000" maxSampleRate="48000"
|
||||
minChannels="1" maxChannels="2" />
|
||||
|
||||
<AudioEncoderCap name="amrwb" enabled="true"
|
||||
minBitRate="6600" maxBitRate="23050"
|
||||
minSampleRate="16000" maxSampleRate="16000"
|
||||
minChannels="1" maxChannels="1" />
|
||||
|
||||
<AudioEncoderCap name="amrnb" enabled="true"
|
||||
minBitRate="5525" maxBitRate="12200"
|
||||
minSampleRate="8000" maxSampleRate="8000"
|
||||
minChannels="1" maxChannels="1" />
|
||||
|
||||
<!--
|
||||
FIXME:
|
||||
We do not check decoder capabilities at present
|
||||
At present, we only check whether windows media is visible
|
||||
for TEST applications. For other applications, we do
|
||||
not perform any checks at all.
|
||||
-->
|
||||
<VideoDecoderCap name="wmv" enabled="false"/>
|
||||
<AudioDecoderCap name="wma" enabled="false"/>
|
||||
</MediaSettings>
|
||||
+2294
File diff suppressed because it is too large
Load Diff
+32
@@ -0,0 +1,32 @@
|
||||
# Copyright (c) 2017, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
#
|
||||
|
||||
PRIO=1,1,1,1,0,0,0,0
|
||||
#arch_timer, arm-pmu, arch_mem_timer
|
||||
IGNORED_IRQ=19,21,39
|
||||
Vendored
+179
@@ -0,0 +1,179 @@
|
||||
################################
|
||||
# Sensor Settings
|
||||
################################
|
||||
#The following parameters are optional.
|
||||
#Internal defaults support MEMS sensors
|
||||
#native to most handset devices.
|
||||
#Device specific sensor characterization
|
||||
#for improved performance is possible as
|
||||
#described in SAP application notes.
|
||||
#GYRO_BIAS_RANDOM_WALK=
|
||||
#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
#RATE_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
|
||||
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
||||
# 4 - Debug, 5 - Verbose
|
||||
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
||||
DEBUG_LEVEL = 0
|
||||
# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
|
||||
# used in loc_eng_reinit
|
||||
SENSOR_ACCEL_BATCHES_PER_SEC=2
|
||||
SENSOR_ACCEL_SAMPLES_PER_BATCH=5
|
||||
SENSOR_GYRO_BATCHES_PER_SEC=2
|
||||
SENSOR_GYRO_SAMPLES_PER_BATCH=5
|
||||
# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
|
||||
SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
|
||||
SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
|
||||
SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
|
||||
SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
|
||||
|
||||
# Sensor Control Mode (0=AUTO, 1=FORCE_ON, 2=MODEM_DEFAULT)
|
||||
# used in loc_eng_reinit
|
||||
SENSOR_CONTROL_MODE=2
|
||||
|
||||
# Bit mask used to define which sensor algorithms are used.
|
||||
# Setting each bit has the following definition:
|
||||
# 0x1 - DISABLE_INS_POSITIONING_FILTER
|
||||
# 0x0 - ENABLE_INS_POSITIONING_FILTER
|
||||
SENSOR_ALGORITHM_CONFIG_MASK=0x0
|
||||
|
||||
#Vehicle Network Provider configuration
|
||||
|
||||
#Service configuration strings
|
||||
#The number before colon in VN_X items defines version of the format of the rest of the string
|
||||
#VN_ACCEL_CFG=0:5
|
||||
#VN_GYRO_CFG=0:5.5
|
||||
#VN_ODOMETRY_CFG=0:2,4.5
|
||||
|
||||
################################################
|
||||
# QDR3 configurations #
|
||||
################################################
|
||||
#VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2
|
||||
#VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
|
||||
VN_SPEED_CFG=1:777,0,0,1,3,1,0.002778,0,40,8,32,8
|
||||
VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
|
||||
|
||||
################################################
|
||||
# QDR2-Gyro configurations #
|
||||
################################################
|
||||
#VN_GYRO_CFG=1:555,0,1,0,0,0,0,-6.5,6.6066,-6.5,-1.00,2,6.607,6.6068,0,0,16,0.0002,0,16,0.0002,0,16,0.0002
|
||||
#VN_SPEED_CFG=1:555,0,0,1,2,1,0.01,0,56,8,48,8
|
||||
#VN_GEAR_CFG=1:555,16,4,0,1,1,9,0,1,2,3,4,5,6,7,8
|
||||
|
||||
################################################
|
||||
# QDR2-DWT configurations #
|
||||
################################################
|
||||
#VN_SPEED_CFG=1:555,22,1,2,1,1,1,0,8,8,23,1,2,0,1,0,8,8,23,1
|
||||
#VN_GEAR_CFG=1:555,12,4,16,14,16,8,1,2,3,4,5,6,7,8
|
||||
#VN_DWS_CFG=1:555,0,0,1,3,1,1,0,0,8,0,0,8,8,0,0,16,8,0,0,24,8,0,0
|
||||
#VN_GYRO_CFG=1:555,40,16,1.0,40,16,1.0,40,16,1.0
|
||||
|
||||
#####################################################################################
|
||||
# VNW service batching configuration strings #
|
||||
# VNW provider will initialize default type as Time based batching #
|
||||
# Each service batch value is configured to be 100 #
|
||||
# VN_ACCEL_CFG_BATCH_VALUE will be treated as time in Ms if VN_CFG_BATCH_TYPE #
|
||||
# is set to time based batching #
|
||||
# VN_ACCEL_CFG_BATCH_VALUE will be treated as sample count if VN_CFG_BATCH_TYPE #
|
||||
# is set to count based batching #
|
||||
# Uncomment and update batch time /sample count as per selected batching type #
|
||||
#####################################################################################
|
||||
# Batching type
|
||||
# 1 - Time based (default)
|
||||
# 2 - Count based
|
||||
VN_CFG_BATCH_TYPE=1
|
||||
|
||||
#Vehicle Accel batching value, it can either accept time in milli seconds or sample count
|
||||
#VN_ACCEL_CFG_BATCH_VALUE=100
|
||||
|
||||
#Vehicle Gyro batching value, it can either accept time in milli seconds or sample count
|
||||
VN_GYRO_CFG_BATCH_VALUE=50
|
||||
|
||||
#Vehicle Odo batching value, it can either accept time in milli seconds or sample count
|
||||
#VN_ODOMETRY_CFG_BATCH_VALUE=100
|
||||
|
||||
#Vehicle Speed batching value, it can either accept time in milli seconds or sample count
|
||||
VN_SPEED_CFG_BATCH_VALUE=50
|
||||
|
||||
#Vehicle Gear batching value, it can either accept time in milli seconds or sample count
|
||||
VN_GEAR_CFG_BATCH_VALUE=50
|
||||
|
||||
#Vehicle DWS batching value, it can either accept time in milli seconds or sample count
|
||||
#VN_DWS_CFG_BATCH_VALUE=100
|
||||
####################################################################################
|
||||
|
||||
#Procesors clock ratio: AP and CAN bus microcontroller
|
||||
################################################
|
||||
# QDR3 configurations #
|
||||
################################################
|
||||
VN_PROC_CLOCK_RATIO=1.0
|
||||
|
||||
################################################
|
||||
# QDR2-DWT OR QDR2-Gyro configurations #
|
||||
################################################
|
||||
#VN_PROC_CLOCK_RATIO = 1.0
|
||||
|
||||
# Time source used by Sensor HAL
|
||||
# Setting this value controls accuracy of location sensor services.
|
||||
# 0 - Unknown
|
||||
# 1 - CLOCK_BOOTTIME
|
||||
# 2 - CLOCK_MONOTONIC
|
||||
# 3 - CLOCK_REALTIME
|
||||
# 4 - CLOCK_BOOTTIME using Alarm timer interface
|
||||
NDK_PROVIDER_TIME_SOURCE=1
|
||||
|
||||
# Sensor Batching Configuration
|
||||
# 0 - Time based
|
||||
# 1 - Fixed count based
|
||||
# 2 - Variable count based
|
||||
COUNT_BASED_BATCHING=1
|
||||
SYNC_ONCE=0
|
||||
|
||||
# Vehicle Network Data optimization
|
||||
# Default value: 0
|
||||
# Value 0x40000 - Speed(bit 18 eSLIM_SERVICE_VEHICLE_SPEED)
|
||||
# Value 0x80000 - Speed(bit 19 eSLIM_SERVICE_VEHICLE_DWS)
|
||||
# Value 0x100000 - Speed(bit 20 eSLIM_SERVICE_VEHICLE_GEAR)
|
||||
VN_ENABLE_DATA_OPTIMIZATION=0x100000
|
||||
|
||||
# Vehicle Network Data Routing time interval
|
||||
# This is applicable only if VN_ENABLE_DATA_OPTIMIZATION value is set
|
||||
# Default value: 5000 msec
|
||||
VN_DATA_ROUTING_TIME_INTERVAL_MSEC=3000
|
||||
|
||||
#Sensor HAL Provider Configuration HAL Library name including path
|
||||
################################################
|
||||
# #
|
||||
# Configuration for BMI 160 Sensor #
|
||||
# #
|
||||
################################################
|
||||
#SENSOR_TYPE=2
|
||||
#SENSOR_HAL_LIB_PATH=/usr/lib/libbmi160sensors.so.1
|
||||
|
||||
################################################
|
||||
# #
|
||||
# Configuration for ASM330 Sensor #
|
||||
# #
|
||||
################################################
|
||||
SENSOR_TYPE=1
|
||||
SENSOR_HAL_LIB_PATH=/usr/lib/libasm330sensors.so.1
|
||||
|
||||
|
||||
################################################
|
||||
# #
|
||||
# Configuration for IAM20680 Sensor #
|
||||
# #
|
||||
################################################
|
||||
#SENSOR_TYPE=3
|
||||
#SENSOR_HAL_LIB_PATH=/usr/lib/libiam20680sensors.so.1
|
||||
|
||||
|
||||
################################################
|
||||
# #
|
||||
# Configuration for SMI130 Sensor #
|
||||
# #
|
||||
################################################
|
||||
#SENSOR_TYPE=4
|
||||
#SENSOR_HAL_LIB_PATH=/usr/lib/libsmi130sensors.so.1
|
||||
+134
@@ -0,0 +1,134 @@
|
||||
<AD4Calib Version="1.0 ">
|
||||
<Init NumOfParams="75">
|
||||
<init_param_001 Size="33">0x0000 0x0000 0x0BFC 0x15FE 0x2000 0x2800 0x3000 0x3800 0x4000 0x4800 0x5000 0x5800 0x6000 0x6800 0x7000 0x7800 0x8000 0x87FF 0x8FFF 0x97FF 0x9FFF 0xA7FF 0xAFFF 0xB7FF 0xBFFF 0xC7FF 0xCFFF 0xD7FF 0xDFFF 0xE7FF 0xEFFF 0xF7FF 0xFFFF </init_param_001>
|
||||
<init_param_002 Size="33">0x0000 0x0800 0x1000 0x1800 0x2000 0x2800 0x3000 0x3800 0x4000 0x4800 0x5000 0x5800 0x6000 0x6800 0x7000 0x7800 0x8000 0x87FF 0x8FFF 0x97FF 0x9FFF 0xA7FF 0xAFFF 0xB7FF 0xBFFF 0xC7FF 0xCFFF 0xD7FF 0xDFFF 0xE7FF 0xEFFF 0xF7FF 0xFFFF </init_param_002>
|
||||
<init_param_003 Size="33">0x0000 0x0800 0x1000 0x1800 0x2000 0x2800 0x3000 0x3800 0x4000 0x4800 0x5000 0x5800 0x6000 0x6800 0x7000 0x7800 0x8000 0x87FF 0x8FFF 0x97FF 0x9FFF 0xA7FF 0xAFFF 0xB7FF 0xBFFF 0xC7FF 0xCFFF 0xD7FF 0xDFFF 0xE7FF 0xEFFF 0xF7FF 0xFFFF </init_param_003>
|
||||
<init_param_004 Size="33">0x0000 0x0800 0x1000 0x1801 0x1D61 0x22F2 0x26A2 0x2993 0x2C23 0x2E94 0x3114 0x33A5 0x3685 0x39C6 0x3D66 0x4177 0x45E7 0x4AE8 0x5058 0x5669 0x5D29 0x648A 0x6CAA 0x759B 0x7F7B 0x8A5C 0x965C 0xA3AD 0xB25D 0xC2BE 0xD4EE 0xE93F 0xFFFF </init_param_004>
|
||||
<init_param_005 Size="32">0x0001 0x0032 0x0064 0x0096 0x00FA 0x015E 0x0190 0x0384 0x04E2 0x0708 0x08FC 0x0BB8 0x1770 0x2EE0 0x5DC0 0xC350 0x04B0 0x2125 0x2EE0 0x3969 0x4A1E 0x57B2 0x5DC0 0x8CA0 0xA5BA 0xC6E0 0xE0CE 0xFFFF 0xFFFF 0xFFFF 0xFFFF 0xFFFF </init_param_005>
|
||||
<init_param_006 Size="32">0x0000 0x000A 0x0019 0x0032 0x0064 0x00C8 0x0190 0x02BC 0x03E8 0x05DC 0x09C4 0x0FA0 0x1F40 0x3A98 0x7530 0xFFFF 0x0000 0x000A 0x0019 0x0032 0x0064 0x00C8 0x0190 0x02BC 0x03E8 0x05DC 0x09C4 0x0FA0 0x1F40 0x3A98 0x7530 0xFFFF </init_param_006>
|
||||
<init_param_007 Size="33">0x0000 0x011F 0x01FF 0x02C8 0x0381 0x0430 0x04D5 0x0573 0x0609 0x069A 0x0726 0x07AC 0x082F 0x08AD 0x0927 0x099E 0x0A12 0x0A82 0x0AF0 0x0B5B 0x0BC3 0x0C28 0x0C8C 0x0CED 0x0D4C 0x0DA9 0x0E03 0x0E5C 0x0EB4 0x0F09 0x0F5D 0x0FAF 0x0FFF </init_param_007>
|
||||
<init_param_008 Size="33">0x00FF 0x0116 0x012E 0x0146 0x015E 0x0176 0x018E 0x01A6 0x01BE 0x01D6 0x01EE 0x0205 0x021D 0x0235 0x024D 0x0265 0x027D 0x0295 0x02AC 0x02C4 0x02DC 0x02F3 0x030B 0x0323 0x033A 0x0352 0x036A 0x0381 0x0399 0x03B1 0x03C8 0x03E0 0x03F8 </init_param_008>
|
||||
<init_param_009 Size="1">0x03</init_param_009>
|
||||
<init_param_010 Size="1">0x3F</init_param_010>
|
||||
<init_param_011 Size="1">0x0780</init_param_011>
|
||||
<init_param_012 Size="1">0x0438</init_param_012>
|
||||
<init_param_013 Size="1">0x0002</init_param_013>
|
||||
<init_param_014 Size="1">0x0002</init_param_014>
|
||||
<init_param_015 Size="1">0xFFFF</init_param_015>
|
||||
<init_param_016 Size="1">0x06</init_param_016>
|
||||
<init_param_017 Size="1">0x030</init_param_017>
|
||||
<init_param_018 Size="1">0x012</init_param_018>
|
||||
<init_param_019 Size="1">0x044</init_param_019>
|
||||
<init_param_020 Size="1">0xFFFF</init_param_020>
|
||||
<init_param_021 Size="1">0x80</init_param_021>
|
||||
<init_param_022 Size="1">0x80</init_param_022>
|
||||
<init_param_023 Size="1">0x07AE</init_param_023>
|
||||
<init_param_024 Size="1">0x0800</init_param_024>
|
||||
<init_param_025 Size="1">0x0333</init_param_025>
|
||||
<init_param_026 Size="1">0x0800</init_param_026>
|
||||
<init_param_027 Size="1">0x0333</init_param_027>
|
||||
<init_param_028 Size="1">0x0006</init_param_028>
|
||||
<init_param_029 Size="1">0x0222</init_param_029>
|
||||
<init_param_030 Size="1">0x1000</init_param_030>
|
||||
<init_param_031 Size="1">0x012C</init_param_031>
|
||||
<init_param_032 Size="1">0x0BB8</init_param_032>
|
||||
<init_param_033 Size="1">0x1DB0</init_param_033>
|
||||
<init_param_034 Size="1">0xFFFF</init_param_034>
|
||||
<init_param_035 Size="1">0xFFFF</init_param_035>
|
||||
<init_param_036 Size="1">0x10</init_param_036>
|
||||
<init_param_037 Size="1">0x00</init_param_037>
|
||||
<init_param_038 Size="1">0x10</init_param_038>
|
||||
<init_param_039 Size="1">0x00</init_param_039>
|
||||
<init_param_040 Size="1">0xFFFF</init_param_040>
|
||||
<init_param_041 Size="1">0x10</init_param_041>
|
||||
<init_param_042 Size="1">0x1000</init_param_042>
|
||||
<init_param_043 Size="1">0x10</init_param_043>
|
||||
<init_param_044 Size="1">0x0200</init_param_044>
|
||||
<init_param_045 Size="1">0x0080</init_param_045>
|
||||
<init_param_046 Size="1">0x0</init_param_046>
|
||||
<init_param_047 Size="1">0xFF</init_param_047>
|
||||
<init_param_048 Size="1">0x07</init_param_048>
|
||||
<init_param_049 Size="1">0xC6</init_param_049>
|
||||
<init_param_050 Size="1">0xF1</init_param_050>
|
||||
<init_param_051 Size="1">0x3C</init_param_051>
|
||||
<init_param_052 Size="1">0xF0</init_param_052>
|
||||
<init_param_053 Size="1">0x000</init_param_053>
|
||||
<init_param_054 Size="1">0x3FF</init_param_054>
|
||||
<init_param_055 Size="1">0xf0</init_param_055>
|
||||
<init_param_056 Size="1">0x00</init_param_056>
|
||||
<init_param_057 Size="1">0x00</init_param_057>
|
||||
<init_param_058 Size="1">0x6</init_param_058>
|
||||
<init_param_059 Size="1">0x05</init_param_059>
|
||||
<init_param_060 Size="1">0x00</init_param_060>
|
||||
<init_param_061 Size="1">0x00</init_param_061>
|
||||
<init_param_062 Size="1">0x003</init_param_062>
|
||||
<init_param_063 Size="1">0x001</init_param_063>
|
||||
<init_param_064 Size="1">0x001</init_param_064>
|
||||
<init_param_065 Size="1">0x3FF</init_param_065>
|
||||
<init_param_066 Size="1">0x08</init_param_066>
|
||||
<init_param_067 Size="1">0x08</init_param_067>
|
||||
<init_param_068 Size="1">0x13</init_param_068>
|
||||
<init_param_069 Size="1">0x0000</init_param_069>
|
||||
<init_param_070 Size="1">0x001</init_param_070>
|
||||
<init_param_071 Size="1">0x00C</init_param_071>
|
||||
<init_param_072 Size="1">0x050</init_param_072>
|
||||
<init_param_073 Size="1">0x80</init_param_073>
|
||||
<init_param_074 Size="1">0x040</init_param_074>
|
||||
<init_param_075 Size="1">0x008</init_param_075>
|
||||
</Init>
|
||||
<Config NumOfParams="53">
|
||||
<cfg_param_001 Size="1">0x0000</cfg_param_001>
|
||||
<cfg_param_002 Size="1">0xFFFF</cfg_param_002>
|
||||
<cfg_param_003 Size="1">0x0000</cfg_param_003>
|
||||
<cfg_param_004 Size="1">0xFFFF</cfg_param_004>
|
||||
<cfg_param_005 Size="1">0x86</cfg_param_005>
|
||||
<cfg_param_006 Size="1">0x10</cfg_param_006>
|
||||
<cfg_param_007 Size="1">0x80</cfg_param_007>
|
||||
<cfg_param_008 Size="1">0x44</cfg_param_008>
|
||||
<cfg_param_009 Size="1">0x200</cfg_param_009>
|
||||
<cfg_param_010 Size="1">0x500</cfg_param_010>
|
||||
<cfg_param_011 Size="1">0x0400</cfg_param_011>
|
||||
<cfg_param_012 Size="1">0x0400</cfg_param_012>
|
||||
<cfg_param_013 Size="1">0x80</cfg_param_013>
|
||||
<cfg_param_014 Size="1">0x5025</cfg_param_014>
|
||||
<cfg_param_015 Size="1">0x0000</cfg_param_015>
|
||||
<cfg_param_016 Size="1">0x0000</cfg_param_016>
|
||||
<cfg_param_017 Size="1">0x000C</cfg_param_017>
|
||||
<cfg_param_018 Size="1">0x0800</cfg_param_018>
|
||||
<cfg_param_019 Size="1">0x0400</cfg_param_019>
|
||||
<cfg_param_020 Size="1">0x0400</cfg_param_020>
|
||||
<cfg_param_021 Size="1">0x0001</cfg_param_021>
|
||||
<cfg_param_022 Size="1">0x0222</cfg_param_022>
|
||||
<cfg_param_023 Size="1">0x0400</cfg_param_023>
|
||||
<cfg_param_024 Size="1">0x1000</cfg_param_024>
|
||||
<cfg_param_025 Size="1">0x0028</cfg_param_025>
|
||||
<cfg_param_026 Size="1">0x005F</cfg_param_026>
|
||||
<cfg_param_027 Size="1">0x0000</cfg_param_027>
|
||||
<cfg_param_028 Size="1">0x0000</cfg_param_028>
|
||||
<cfg_param_029 Size="1">0x0000</cfg_param_029>
|
||||
<cfg_param_030 Size="1">0x0018</cfg_param_030>
|
||||
<cfg_param_031 Size="1">0x060</cfg_param_031>
|
||||
<cfg_param_032 Size="1">0x200</cfg_param_032>
|
||||
<cfg_param_033 Size="1">0x80</cfg_param_033>
|
||||
<cfg_param_034 Size="1">0x0020</cfg_param_034>
|
||||
<cfg_param_035 Size="1">0x022</cfg_param_035>
|
||||
<cfg_param_036 Size="1">0x500</cfg_param_036>
|
||||
<cfg_param_037 Size="1">0x310</cfg_param_037>
|
||||
<cfg_param_038 Size="1">0x80</cfg_param_038>
|
||||
<cfg_param_039 Size="1">0x30</cfg_param_039>
|
||||
<cfg_param_040 Size="1">0x19A</cfg_param_040>
|
||||
<cfg_param_041 Size="1">0x03</cfg_param_041>
|
||||
<cfg_param_042 Size="1">0x200</cfg_param_042>
|
||||
<cfg_param_043 Size="1">0x200</cfg_param_043>
|
||||
<cfg_param_044 Size="1">0x80</cfg_param_044>
|
||||
<cfg_param_045 Size="1">0x90</cfg_param_045>
|
||||
<cfg_param_046 Size="1">0x5000</cfg_param_046>
|
||||
<cfg_param_047 Size="1">0x100</cfg_param_047>
|
||||
<cfg_param_048 Size="1">0x64</cfg_param_048>
|
||||
<cfg_param_049 Size="1">0x200</cfg_param_049>
|
||||
<cfg_param_050 Size="1">0x80</cfg_param_050>
|
||||
<cfg_param_051 Size="1">0x7D0</cfg_param_051>
|
||||
<cfg_param_052 Size="1">0xFDE8</cfg_param_052>
|
||||
<cfg_param_053 Size="1">0xC8</cfg_param_053>
|
||||
</Config>
|
||||
</AD4Calib>
|
||||
Vendored
+333
@@ -0,0 +1,333 @@
|
||||
/* IPC Security Config */
|
||||
/* <GPS QMI Service ID - 16>:<GPS QMI Instance ID - all instances>:<Client Group ID> */
|
||||
16:4294967295:1000:1021:1026
|
||||
/* <QDMA QMI Service ID - 75>:<QDMA QMI Instance ID - all instances>:<Client Group ID> */
|
||||
75:4294967295:1000:1001:3006
|
||||
/* <LOWI QMI Service ID - 38>:<LOWI QMI Instance ID - all instances>:<Client Group ID> */
|
||||
56:4294967295:1021
|
||||
/* Allow SS CTL service to be used by system and net_raw processes */
|
||||
43:4294967295:1000:3004
|
||||
/* <UIMHTTP QMI Service ID - 16>:<UIMHTTP QMI Instance ID - all instances>:<Client Group ID> */
|
||||
71:4294967295:1001
|
||||
/* <UIMRMT QMI Service ID - 16>:<UIMRMT QMI Instance ID - all instances>:<Client Group ID> */
|
||||
50:4294967295:1001
|
||||
/* QMI-SLIM service permitted to gps and net_raw */
|
||||
55:4294967295:1021
|
||||
/* Allow Sensor services to be used by sensor process */
|
||||
256:4294967295:1000:1006:1013:1021:1047:3011
|
||||
257:4294967295:1000:1006:1013:1021:1047:3011
|
||||
258:4294967295:1000:1006:1013:1021:1047:3011
|
||||
259:4294967295:1000:1006:1013:1021:1047:3011
|
||||
260:4294967295:1000:1006:1013:1021:1047:3011
|
||||
261:4294967295:1000:1006:1013:1021:1047:3011
|
||||
262:4294967295:1000:1006:1013:1021:1047:3011
|
||||
263:4294967295:1000:1006:1013:1021:1047:3011
|
||||
264:4294967295:1000:1006:1013:1021:1047:3011
|
||||
265:4294967295:1000:1006:1013:1021:1047:3011
|
||||
266:4294967295:1000:1006:1013:1021:1047:3011
|
||||
267:4294967295:1000:1006:1013:1021:1047:3011
|
||||
268:4294967295:1000:1006:1013:1021:1047:3011
|
||||
269:4294967295:1000:1006:1013:1021:1047:3011
|
||||
270:4294967295:1000:1006:1013:1021:1047:3011
|
||||
271:4294967295:1000:1006:1013:1021:1047:3011
|
||||
272:4294967295:1000:1006:1013:1021:1047:3011
|
||||
273:4294967295:1000:1006:1013:1021:1047:3011
|
||||
274:4294967295:1000:1006:1013:1021:1047:3011
|
||||
275:4294967295:1000:1006:1013:1021:1047:3011
|
||||
276:4294967295:1000:1006:1013:1021:1047:3011
|
||||
277:4294967295:1000:1006:1013:1021:1047:3011
|
||||
278:4294967295:1000:1006:1013:1021:1047:3011
|
||||
279:4294967295:1000:1006:1013:1021:1047:3011
|
||||
280:4294967295:1000:1006:1013:1021:1047:3011
|
||||
281:4294967295:1000:1006:1013:1021:1047:3011
|
||||
282:4294967295:1000:1006:1013:1021:1047:3011
|
||||
283:4294967295:1000:1006:1013:1021:1047:3011
|
||||
284:4294967295:1000:1006:1013:1021:1047:3011
|
||||
285:4294967295:1000:1006:1013:1021:1047:3011
|
||||
286:4294967295:1000:1006:1013:1021:1047:3011
|
||||
287:4294967295:1000:1006:1013:1021:1047:3011
|
||||
288:4294967295:1000:1006:1013:1021:1047:3011
|
||||
289:4294967295:1000:1006:1013:1021:1047:3011
|
||||
290:4294967295:1000:1006:1013:1021:1047:3011
|
||||
291:4294967295:1000:1006:1013:1021:1047:3011
|
||||
292:4294967295:1000:1006:1013:1021:1047:3011
|
||||
293:4294967295:1000:1006:1013:1021:1047:3011
|
||||
294:4294967295:1000:1006:1013:1021:1047:3011
|
||||
295:4294967295:1000:1006:1013:1021:1047:3011
|
||||
296:4294967295:1000:1006:1013:1021:1047:3011
|
||||
297:4294967295:1000:1006:1013:1021:1047:3011
|
||||
298:4294967295:1000:1006:1013:1021:1047:3011
|
||||
299:4294967295:1000:1006:1013:1021:1047:3011
|
||||
300:4294967295:1000:1006:1013:1021:1047:3011
|
||||
301:4294967295:1000:1006:1013:1021:1047:3011
|
||||
302:4294967295:1000:1006:1013:1021:1047:3011
|
||||
303:4294967295:1000:1006:1013:1021:1047:3011
|
||||
304:4294967295:1000:1006:1013:1021:1047:3011
|
||||
305:4294967295:1000:1006:1013:1021:1047:3011
|
||||
306:4294967295:1000:1006:1013:1021:1047:3011
|
||||
307:4294967295:1000:1006:1013:1021:1047:3011
|
||||
308:4294967295:1000:1006:1013:1021:1047:3011
|
||||
309:4294967295:1000:1006:1013:1021:1047:3011
|
||||
310:4294967295:1000:1006:1013:1021:1047:3011
|
||||
311:4294967295:1000:1006:1013:1021:1047:3011
|
||||
312:4294967295:1000:1006:1013:1021:1047:3011
|
||||
313:4294967295:1000:1006:1013:1021:1047:3011
|
||||
314:4294967295:1000:1006:1013:1021:1047:3011
|
||||
315:4294967295:1000:1006:1013:1021:1047:3011
|
||||
316:4294967295:1000:1006:1013:1021:1047:3011
|
||||
317:4294967295:1000:1006:1013:1021:1047:3011
|
||||
318:4294967295:1000:1006:1013:1021:1047:3011
|
||||
319:4294967295:1000:1006:1013:1021:1047:3011
|
||||
320:4294967295:1000:1006:1013:1021:1047:3011
|
||||
321:4294967295:1000:1006:1013:1021:1047:3011
|
||||
322:4294967295:1000:1006:1013:1021:1047:3011
|
||||
323:4294967295:1000:1006:1013:1021:1047:3011
|
||||
324:4294967295:1000:1006:1013:1021:1047:3011
|
||||
325:4294967295:1000:1006:1013:1021:1047:3011
|
||||
326:4294967295:1000:1006:1013:1021:1047:3011
|
||||
327:4294967295:1000:1006:1013:1021:1047:3011
|
||||
328:4294967295:1000:1006:1013:1021:1047:3011
|
||||
329:4294967295:1000:1006:1013:1021:1047:3011
|
||||
330:4294967295:1000:1006:1013:1021:1047:3011
|
||||
331:4294967295:1000:1006:1013:1021:1047:3011
|
||||
332:4294967295:1000:1006:1013:1021:1047:3011
|
||||
333:4294967295:1000:1006:1013:1021:1047:3011
|
||||
334:4294967295:1000:1006:1013:1021:1047:3011
|
||||
335:4294967295:1000:1006:1013:1021:1047:3011
|
||||
336:4294967295:1000:1006:1013:1021:1047:3011
|
||||
337:4294967295:1000:1006:1013:1021:1047:3011
|
||||
338:4294967295:1000:1006:1013:1021:1047:3011
|
||||
339:4294967295:1000:1006:1013:1021:1047:3011
|
||||
340:4294967295:1000:1006:1013:1021:1047:3011
|
||||
341:4294967295:1000:1006:1013:1021:1047:3011
|
||||
342:4294967295:1000:1006:1013:1021:1047:3011
|
||||
343:4294967295:1000:1006:1013:1021:1047:3011
|
||||
344:4294967295:1000:1006:1013:1021:1047:3011
|
||||
345:4294967295:1000:1006:1013:1021:1047:3011
|
||||
346:4294967295:1000:1006:1013:1021:1047:3011
|
||||
347:4294967295:1000:1006:1013:1021:1047:3011
|
||||
348:4294967295:1000:1006:1013:1021:1047:3011
|
||||
349:4294967295:1000:1006:1013:1021:1047:3011
|
||||
350:4294967295:1000:1006:1013:1021:1047:3011
|
||||
351:4294967295:1000:1006:1013:1021:1047:3011
|
||||
352:4294967295:1000:1006:1013:1021:1047:3011
|
||||
353:4294967295:1000:1006:1013:1021:1047:3011
|
||||
354:4294967295:1000:1006:1013:1021:1047:3011
|
||||
355:4294967295:1000:1006:1013:1021:1047:3011
|
||||
356:4294967295:1000:1006:1013:1021:1047:3011
|
||||
357:4294967295:1000:1006:1013:1021:1047:3011
|
||||
358:4294967295:1000:1006:1013:1021:1047:3011
|
||||
359:4294967295:1000:1006:1013:1021:1047:3011
|
||||
360:4294967295:1000:1006:1013:1021:1047:3011
|
||||
361:4294967295:1000:1006:1013:1021:1047:3011
|
||||
362:4294967295:1000:1006:1013:1021:1047:3011
|
||||
363:4294967295:1000:1006:1013:1021:1047:3011
|
||||
364:4294967295:1000:1006:1013:1021:1047:3011
|
||||
365:4294967295:1000:1006:1013:1021:1047:3011
|
||||
366:4294967295:1000:1006:1013:1021:1047:3011
|
||||
367:4294967295:1000:1006:1013:1021:1047:3011
|
||||
368:4294967295:1000:1006:1013:1021:1047:3011
|
||||
369:4294967295:1000:1006:1013:1021:1047:3011
|
||||
370:4294967295:1000:1006:1013:1021:1047:3011
|
||||
371:4294967295:1000:1006:1013:1021:1047:3011
|
||||
372:4294967295:1000:1006:1013:1021:1047:3011
|
||||
373:4294967295:1000:1006:1013:1021:1047:3011
|
||||
374:4294967295:1000:1006:1013:1021:1047:3011
|
||||
375:4294967295:1000:1006:1013:1021:1047:3011
|
||||
376:4294967295:1000:1006:1013:1021:1047:3011
|
||||
377:4294967295:1000:1006:1013:1021:1047:3011
|
||||
378:4294967295:1000:1006:1013:1021:1047:3011
|
||||
379:4294967295:1000:1006:1013:1021:1047:3011
|
||||
380:4294967295:1000:1006:1013:1021:1047:3011
|
||||
381:4294967295:1000:1006:1013:1021:1047:3011
|
||||
382:4294967295:1000:1006:1013:1021:1047:3011
|
||||
383:4294967295:1000:1006:1013:1021:1047:3011
|
||||
384:4294967295:1000:1006:1013:1021:1047:3011
|
||||
385:4294967295:1000:1006:1013:1021:1047:3011
|
||||
386:4294967295:1000:1006:1013:1021:1047:3011
|
||||
387:4294967295:1000:1006:1013:1021:1047:3011
|
||||
388:4294967295:1000:1006:1013:1021:1047:3011
|
||||
389:4294967295:1000:1006:1013:1021:1047:3011
|
||||
390:4294967295:1000:1006:1013:1021:1047:3011
|
||||
391:4294967295:1000:1006:1013:1021:1047:3011
|
||||
392:4294967295:1000:1006:1013:1021:1047:3011
|
||||
393:4294967295:1000:1006:1013:1021:1047:3011
|
||||
394:4294967295:1000:1006:1013:1021:1047:3011
|
||||
395:4294967295:1000:1006:1013:1021:1047:3011
|
||||
396:4294967295:1000:1006:1013:1021:1047:3011
|
||||
397:4294967295:1000:1006:1013:1021:1047:3011
|
||||
398:4294967295:1000:1006:1013:1021:1047:3011
|
||||
399:4294967295:1000:1006:1013:1021:1047:3011
|
||||
400:4294967295:1000:1006:1013:1021:1047:3011
|
||||
401:4294967295:1000:1006:1013:1021:1047:3011
|
||||
402:4294967295:1000:1006:1013:1021:1047:3011
|
||||
403:4294967295:1000:1006:1013:1021:1047:3011
|
||||
404:4294967295:1000:1006:1013:1021:1047:3011
|
||||
405:4294967295:1000:1006:1013:1021:1047:3011
|
||||
406:4294967295:1000:1006:1013:1021:1047:3011
|
||||
407:4294967295:1000:1006:1013:1021:1047:3011
|
||||
408:4294967295:1000:1006:1013:1021:1047:3011
|
||||
409:4294967295:1000:1006:1013:1021:1047:3011
|
||||
410:4294967295:1000:1006:1013:1021:1047:3011
|
||||
411:4294967295:1000:1006:1013:1021:1047:3011
|
||||
412:4294967295:1000:1006:1013:1021:1047:3011
|
||||
413:4294967295:1000:1006:1013:1021:1047:3011
|
||||
414:4294967295:1000:1006:1013:1021:1047:3011
|
||||
415:4294967295:1000:1006:1013:1021:1047:3011
|
||||
416:4294967295:1000:1006:1013:1021:1047:3011
|
||||
417:4294967295:1000:1006:1013:1021:1047:3011
|
||||
418:4294967295:1000:1006:1013:1021:1047:3011
|
||||
419:4294967295:1000:1006:1013:1021:1047:3011
|
||||
420:4294967295:1000:1006:1013:1021:1047:3011
|
||||
421:4294967295:1000:1006:1013:1021:1047:3011
|
||||
422:4294967295:1000:1006:1013:1021:1047:3011
|
||||
423:4294967295:1000:1006:1013:1021:1047:3011
|
||||
424:4294967295:1000:1006:1013:1021:1047:3011
|
||||
425:4294967295:1000:1006:1013:1021:1047:3011
|
||||
426:4294967295:1000:1006:1013:1021:1047:3011
|
||||
427:4294967295:1000:1006:1013:1021:1047:3011
|
||||
428:4294967295:1000:1006:1013:1021:1047:3011
|
||||
429:4294967295:1000:1006:1013:1021:1047:3011
|
||||
430:4294967295:1000:1006:1013:1021:1047:3011
|
||||
431:4294967295:1000:1006:1013:1021:1047:3011
|
||||
432:4294967295:1000:1006:1013:1021:1047:3011
|
||||
433:4294967295:1000:1006:1013:1021:1047:3011
|
||||
434:4294967295:1000:1006:1013:1021:1047:3011
|
||||
435:4294967295:1000:1006:1013:1021:1047:3011
|
||||
436:4294967295:1000:1006:1013:1021:1047:3011
|
||||
437:4294967295:1000:1006:1013:1021:1047:3011
|
||||
438:4294967295:1000:1006:1013:1021:1047:3011
|
||||
439:4294967295:1000:1006:1013:1021:1047:3011
|
||||
440:4294967295:1000:1006:1013:1021:1047:3011
|
||||
441:4294967295:1000:1006:1013:1021:1047:3011
|
||||
442:4294967295:1000:1006:1013:1021:1047:3011
|
||||
443:4294967295:1000:1006:1013:1021:1047:3011
|
||||
444:4294967295:1000:1006:1013:1021:1047:3011
|
||||
445:4294967295:1000:1006:1013:1021:1047:3011
|
||||
446:4294967295:1000:1006:1013:1021:1047:3011
|
||||
447:4294967295:1000:1006:1013:1021:1047:3011
|
||||
448:4294967295:1000:1006:1013:1021:1047:3011
|
||||
449:4294967295:1000:1006:1013:1021:1047:3011
|
||||
450:4294967295:1000:1006:1013:1021:1047:3011
|
||||
451:4294967295:1000:1006:1013:1021:1047:3011
|
||||
452:4294967295:1000:1006:1013:1021:1047:3011
|
||||
453:4294967295:1000:1006:1013:1021:1047:3011
|
||||
454:4294967295:1000:1006:1013:1021:1047:3011
|
||||
455:4294967295:1000:1006:1013:1021:1047:3011
|
||||
456:4294967295:1000:1006:1013:1021:1047:3011
|
||||
457:4294967295:1000:1006:1013:1021:1047:3011
|
||||
458:4294967295:1000:1006:1013:1021:1047:3011
|
||||
459:4294967295:1000:1006:1013:1021:1047:3011
|
||||
460:4294967295:1000:1006:1013:1021:1047:3011
|
||||
461:4294967295:1000:1006:1013:1021:1047:3011
|
||||
462:4294967295:1000:1006:1013:1021:1047:3011
|
||||
463:4294967295:1000:1006:1013:1021:1047:3011
|
||||
464:4294967295:1000:1006:1013:1021:1047:3011
|
||||
465:4294967295:1000:1006:1013:1021:1047:3011
|
||||
466:4294967295:1000:1006:1013:1021:1047:3011
|
||||
467:4294967295:1000:1006:1013:1021:1047:3011
|
||||
468:4294967295:1000:1006:1013:1021:1047:3011
|
||||
469:4294967295:1000:1006:1013:1021:1047:3011
|
||||
470:4294967295:1000:1006:1013:1021:1047:3011
|
||||
471:4294967295:1000:1006:1013:1021:1047:3011
|
||||
472:4294967295:1000:1006:1013:1021:1047:3011
|
||||
473:4294967295:1000:1006:1013:1021:1047:3011
|
||||
474:4294967295:1000:1006:1013:1021:1047:3011
|
||||
475:4294967295:1000:1006:1013:1021:1047:3011
|
||||
476:4294967295:1000:1006:1013:1021:1047:3011
|
||||
477:4294967295:1000:1006:1013:1021:1047:3011
|
||||
478:4294967295:1000:1006:1013:1021:1047:3011
|
||||
479:4294967295:1000:1006:1013:1021:1047:3011
|
||||
480:4294967295:1000:1006:1013:1021:1047:3011
|
||||
481:4294967295:1000:1006:1013:1021:1047:3011
|
||||
482:4294967295:1000:1006:1013:1021:1047:3011
|
||||
483:4294967295:1000:1006:1013:1021:1047:3011
|
||||
484:4294967295:1000:1006:1013:1021:1047:3011
|
||||
485:4294967295:1000:1006:1013:1021:1047:3011
|
||||
486:4294967295:1000:1006:1013:1021:1047:3011
|
||||
487:4294967295:1000:1006:1013:1021:1047:3011
|
||||
488:4294967295:1000:1006:1013:1021:1047:3011
|
||||
489:4294967295:1000:1006:1013:1021:1047:3011
|
||||
490:4294967295:1000:1006:1013:1021:1047:3011
|
||||
491:4294967295:1000:1006:1013:1021:1047:3011
|
||||
492:4294967295:1000:1006:1013:1021:1047:3011
|
||||
493:4294967295:1000:1006:1013:1021:1047:3011
|
||||
494:4294967295:1000:1006:1013:1021:1047:3011
|
||||
495:4294967295:1000:1006:1013:1021:1047:3011
|
||||
496:4294967295:1000:1006:1013:1021:1047:3011
|
||||
497:4294967295:1000:1006:1013:1021:1047:3011
|
||||
498:4294967295:1000:1006:1013:1021:1047:3011
|
||||
499:4294967295:1000:1006:1013:1021:1047:3011
|
||||
500:4294967295:1000:1006:1013:1021:1047:3011
|
||||
501:4294967295:1000:1006:1013:1021:1047:3011
|
||||
502:4294967295:1000:1006:1013:1021:1047:3011
|
||||
503:4294967295:1000:1006:1013:1021:1047:3011
|
||||
504:4294967295:1000:1006:1013:1021:1047:3011
|
||||
505:4294967295:1000:1006:1013:1021:1047:3011
|
||||
506:4294967295:1000:1006:1013:1021:1047:3011
|
||||
507:4294967295:1000:1006:1013:1021:1047:3011
|
||||
508:4294967295:1000:1006:1013:1021:1047:3011
|
||||
509:4294967295:1000:1006:1013:1021:1047:3011
|
||||
510:4294967295:1000:1006:1013:1021:1047:3011
|
||||
511:4294967295:1000:1006:1013:1021:1047:3011
|
||||
/* Allow RCS service to aquire net_raw permission */
|
||||
18:4294967295:1001:3004
|
||||
/* Allow RCS service to communicate to IMS QMI Priv Svc*/
|
||||
77:4294967295:1001:3003
|
||||
/* Allow RCS service to access QMI-IMSS service */
|
||||
18:4294967295:1001:3003
|
||||
/* Allow SSGQMIGD to communicate to SSGCCS service*/
|
||||
76:4294967295:1001
|
||||
/* Allow cnd to accquire netbind */
|
||||
18:4294967295:1000:3003
|
||||
/* Allow QMID service to aquire net_raw permission */
|
||||
3:4294967295:1001:1021:3004
|
||||
2:4294967295:1000:1001:3004
|
||||
42:4294967295:1001:3004
|
||||
18:4294967295:1001:3004
|
||||
9:4294967295:1001:3004
|
||||
1:4294967295:1001:3004:1000
|
||||
4:4294967295:1001:3004
|
||||
7:4294967295:1001:3004
|
||||
8:4294967295:1001:3004:1000
|
||||
68:4294967295:1001:3004
|
||||
/* DPM */
|
||||
47:4294967295:1001:3004
|
||||
/* Allow communication to some QMI services with radio privilages */
|
||||
/* Format is <Service id>:<all instances>:<radio> */
|
||||
/* PBM */
|
||||
12:4294967295:1001
|
||||
/* WMS */
|
||||
5:4294967295:1001
|
||||
/* IMS VT */
|
||||
32:4294967295:1001
|
||||
/* IMSP */
|
||||
31:4294967295:1001
|
||||
/* PDC */
|
||||
36:4294967295:1001
|
||||
/* SAR */
|
||||
17:4294967295:1001
|
||||
/* RFRPE */
|
||||
41:4294967295:1001
|
||||
/*UIM*/
|
||||
11:4294967295:1001
|
||||
/*CAT*/
|
||||
10:4294967295:1001
|
||||
/*IMSA*/
|
||||
33:4294967295:1001
|
||||
/* CSVT */
|
||||
29:4294967295:1001
|
||||
/*SERVREG_NOTIF*/
|
||||
64:4294967295:1001
|
||||
66:4294967295:1001
|
||||
73:4294967295:1001
|
||||
/*LTE*/
|
||||
70:4294967295:1001
|
||||
/* Allow Data dpmd to access QMI DFS */
|
||||
48:4294967295:1000:3004
|
||||
/* DIAG */
|
||||
4097:4294967295:2002:2950:3009:2901
|
||||
/* <WLFW QMI Service ID - 0x45>:<WLFW QMI Instance ID - all instances>:<Client Group ID> */
|
||||
69:4294967295:1000
|
||||
/* <WLPS QMI Service ID - 0x39>:<WLFW QMI Instance ID - all instances>:<Client Group ID> */
|
||||
57:4294967295:1000
|
||||
@@ -0,0 +1,67 @@
|
||||
# Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc
|
||||
#
|
||||
# Not a contribution.
|
||||
#
|
||||
# Copyright (C) 2018 The Android Open Source Project
|
||||
#
|
||||
# Licensed under the Apache License, Version 2.0 (the "License");
|
||||
# you may not use this file except in compliance with the License.
|
||||
# You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
# See the License for the specific language governing permissions and
|
||||
# limitations under the License.
|
||||
|
||||
mmap: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
munmap: 1
|
||||
getuid: 1
|
||||
writev: 1
|
||||
prctl: arg0 == PR_SET_VMA || arg0 == PR_GET_DUMPABLE
|
||||
mprotect: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
openat: 1
|
||||
futex: 1
|
||||
close: 1
|
||||
read: 1
|
||||
newfstatat: 1
|
||||
fstat: 1
|
||||
#ioctl: arg1 == BINDER_WRITE_READ || arg1 == BINDER_SET_MAX_THREADS || arg1 == BINDER_VERSION
|
||||
ioctl: 1
|
||||
mremap: 1
|
||||
readlinkat: 1
|
||||
pread64: 1
|
||||
fstatfs: 1
|
||||
rt_sigprocmask: 1
|
||||
faccessat: 1
|
||||
sendto: 1
|
||||
rt_sigaction: 1
|
||||
socket: arg0 == AF_UNIX || arg0 == AF_QIPCRTR
|
||||
recvfrom: 1
|
||||
getsockname: 1
|
||||
getdents64: 1
|
||||
fcntl: 1
|
||||
nanosleep: 1
|
||||
getrandom: 1
|
||||
clone: 1
|
||||
pipe2: 1
|
||||
exit_group: 1
|
||||
write: 1
|
||||
exit: 1
|
||||
getpid: 1
|
||||
sigaltstack: 1
|
||||
getrlimit: 1
|
||||
restart_syscall: 1
|
||||
setsockopt: 1
|
||||
sched_getscheduler: 1
|
||||
rt_sigreturn: 1
|
||||
execve: 1
|
||||
madvise: 1
|
||||
set_tid_address: 1
|
||||
connect: 1
|
||||
ppoll: 1
|
||||
clock_gettime: 1
|
||||
@@ -0,0 +1,89 @@
|
||||
###################################################################################################
|
||||
# Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
###################################################################################################
|
||||
#
|
||||
# Not a Contribution.
|
||||
#
|
||||
|
||||
# Copyright (C) 2019 The Android Open Source Project
|
||||
#
|
||||
# Licensed under the Apache License, Version 2.0 (the "License");
|
||||
# you may not use this file except in compliance with the License.
|
||||
# You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
# See the License for the specific language governing permissions and
|
||||
# limitations under the License.
|
||||
|
||||
futex: 1
|
||||
# ioctl calls are filtered via the selinux policy.
|
||||
ioctl: 1
|
||||
sched_yield: 1
|
||||
close: 1
|
||||
dup: 1
|
||||
ppoll: 1
|
||||
mprotect: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
mmap2: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
memfd_create: 1
|
||||
ftruncate: 1
|
||||
ftruncate64: 1
|
||||
|
||||
mremap: arg3 == 3
|
||||
munmap: 1
|
||||
prctl: 1
|
||||
getuid32: 1
|
||||
writev: 1
|
||||
sigaltstack: 1
|
||||
clone: 1
|
||||
exit: 1
|
||||
lseek: 1
|
||||
rt_sigprocmask: 1
|
||||
openat: 1
|
||||
open: 1
|
||||
fstat64: 1
|
||||
write: 1
|
||||
nanosleep: 1
|
||||
setpriority: 1
|
||||
set_tid_address: 1
|
||||
getdents64: 1
|
||||
readlinkat: 1
|
||||
readlink: 1
|
||||
read: 1
|
||||
pread64: 1
|
||||
fstatfs64: 1
|
||||
gettimeofday: 1
|
||||
faccessat: 1
|
||||
_llseek: 1
|
||||
fstatat64: 1
|
||||
ugetrlimit: 1
|
||||
exit_group: 1
|
||||
restart_syscall: 1
|
||||
rt_sigreturn: 1
|
||||
getrandom: 1
|
||||
madvise: 1
|
||||
|
||||
# crash dump policy additions
|
||||
sigreturn: 1
|
||||
clock_gettime: 1
|
||||
futex: 1
|
||||
getpid: 1
|
||||
gettid: 1
|
||||
pipe2: 1
|
||||
recvmsg: 1
|
||||
process_vm_readv: 1
|
||||
tgkill: 1
|
||||
rt_sigaction: 1
|
||||
rt_tgsigqueueinfo: 1
|
||||
#prctl: arg0 == PR_GET_NO_NEW_PRIVS || arg0 == 0x53564d41
|
||||
#mprotect: arg2 in 0x1|0x2
|
||||
#mmap2: arg2 in 0x1|0x2
|
||||
geteuid32: 1
|
||||
getgid32: 1
|
||||
getegid32: 1
|
||||
getgroups32: 1
|
||||
@@ -0,0 +1,9 @@
|
||||
# device specific syscalls
|
||||
pselect6: 1
|
||||
eventfd2: 1
|
||||
sendto: 1
|
||||
recvfrom: 1
|
||||
_llseek: 1
|
||||
sysinfo: 1
|
||||
getcwd: 1
|
||||
getdents64: 1
|
||||
@@ -0,0 +1,95 @@
|
||||
#Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
#All Rights Reserved.
|
||||
#Confidential and Proprietary - Qualcomm Technologies, Inc
|
||||
|
||||
#Not a contribution.
|
||||
|
||||
#Copyright (C) 2018 The Android Open Source Project
|
||||
|
||||
#"Licensed under the Apache License, Version 2.0 (the \"License\");"
|
||||
#you may not use this file except in compliance with the License.
|
||||
#You may obtain a copy of the License at
|
||||
|
||||
#http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
#Unless required by applicable law or agreed to in writing, software
|
||||
#"distributed under the License is distributed on an \"AS IS\" BASIS,"
|
||||
#WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
#See the License for the specific language governing permissions and
|
||||
#limitations under the License.
|
||||
|
||||
mmap: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
munmap: 1
|
||||
mprotect: arg2 in ~PROT_EXEC || arg2 in ~PROT_WRITE
|
||||
#prctl: arg0 == PR_SET_VMA || arg0 == PR_SET_NO_NEW_PRIVS || arg0 == PR_GET_DUMPABLE || arg0 == PR_SET_SECCOMP || arg0 == 0x37 /* PR_??? */
|
||||
prctl: 1
|
||||
read: 1
|
||||
openat: 1
|
||||
close: 1
|
||||
shutdown: 1
|
||||
kill: 1
|
||||
futex: 1
|
||||
fstat: 1
|
||||
gettimeofday: 1
|
||||
readlinkat: 1
|
||||
newfstatat: 1
|
||||
mremap: 1
|
||||
pread64: 1
|
||||
fstatfs: 1
|
||||
rt_sigaction: 1
|
||||
faccessat: 1
|
||||
socket: arg0 == AF_UNIX || arg0 == AF_QIPCRTR
|
||||
writev: 1
|
||||
connect: 1
|
||||
rt_sigprocmask: 1
|
||||
fcntl: 1
|
||||
sendto: 1
|
||||
getrandom: 1
|
||||
lseek: 1
|
||||
exit_group: 1
|
||||
rt_tgsigqueueinfo: 1
|
||||
write: 1
|
||||
exit: 1
|
||||
getpid: 1
|
||||
sigaltstack: 1
|
||||
recvmsg: 1
|
||||
dup: 1
|
||||
getrlimit: 1
|
||||
restart_syscall: 1
|
||||
clone: 1
|
||||
gettid: 1
|
||||
sched_getscheduler: 1
|
||||
ioctl: 1
|
||||
execve: 1
|
||||
getuid: 1
|
||||
madvise: 1
|
||||
set_tid_address: 1
|
||||
nanosleep: 1
|
||||
rt_sigreturn: 1
|
||||
rt_sigsuspend: 1
|
||||
setpriority: 1
|
||||
geteuid: 1
|
||||
getgid: 1
|
||||
getegid: 1
|
||||
getgroups: 1
|
||||
pipe2: 1
|
||||
setitimer: 1
|
||||
pselect6: 1
|
||||
getsockname: 1
|
||||
recvfrom: 1
|
||||
ppoll: 1
|
||||
socketpair: 1
|
||||
setsockopt: 1
|
||||
getsockopt: 1
|
||||
sendmsg: 1
|
||||
bind: 1
|
||||
timer_create: 1
|
||||
timer_settime: 1
|
||||
timer_delete: 1
|
||||
clock_gettime: 1
|
||||
sched_getaffinity: 1
|
||||
#crash dump policy addition
|
||||
socket: 1
|
||||
process_vm_readv: 1
|
||||
tgkill: 1
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user