surya: Update graphics firmware from sweet_k6a

Commit [1] ("Introduce a dependency monitor for fences") has added new
members to the GraphicBuffer struct, increasing the size from 0x100 to
0xd30. camera.xiaomi.so creates GraphicBuffer in its constructors using
"new GraphicBuffer(..)" which encodes the size to allocate at compile
time. Then, on destruction of the object, the implicit destructor will
try to destruct the new members, but, since this memory was not
allocated for the object, this leads to memory access of unallocated
storage.

F DEBUG   : backtrace:
F DEBUG   :       #00 pc 000000000003ba00  /vendor/lib64/libui.so (__aarch64_ldadd8_acq_rel+16) (BuildId: b577faa139eb3404c7d3a674b147634c)
F DEBUG   :       #01 pc 0000000000051364  /vendor/lib64/libui.so (android::GraphicBuffer::~GraphicBuffer()+248) (BuildId: b577faa139eb3404c7d3a674b147634c)
F DEBUG   :       #02 pc 0000000000051698  /vendor/lib64/libui.so (android::GraphicBuffer::~GraphicBuffer()+20) (BuildId: b577faa139eb3404c7d3a674b147634c)
F DEBUG   :       #03 pc 0000000000011064  /vendor/lib64/libutils.so (android::RefBase::decStrong(void const*) const+164) (BuildId: 99d1ab745e7b73420d8d2b397483ef54)
F DEBUG   :       #04 pc 00000000000cd538  /vendor/lib64/hw/camera.xiaomi.so (mihal::GraBuffer::~GraBuffer()+236) (BuildId: a4c59705588bd26d407f0ab181902baf)

[1]: df868baf2a

Change-Id: Ib51efcaa7514fa5902ac68cdcff2a8ecf97be511

Android.bp

@@ -5764,7 +5764,7 @@ cc_prebuilt_library_shared {
 }
 
 prebuilt_rfsa {
-    name: "capi_v2_aptX_CLHDADV_Encoder",
+    name: "vendor_lib_rfsa_adsp_capi_v2_aptX_CLHDADV_Encoder_so",
     filename: "capi_v2_aptX_CLHDADV_Encoder.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/capi_v2_aptX_CLHDADV_Encoder.so",
@@ -5773,7 +5773,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "capi_v2_aptX_CLHDAD_Speech_Decoder",
+    name: "vendor_lib_rfsa_adsp_capi_v2_aptX_CLHDAD_Speech_Decoder_so",
     filename: "capi_v2_aptX_CLHDAD_Speech_Decoder.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/capi_v2_aptX_CLHDAD_Speech_Decoder.so",
@@ -5782,7 +5782,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "capi_v2_aptX_Classic",
+    name: "vendor_lib_rfsa_adsp_capi_v2_aptX_Classic_so",
     filename: "capi_v2_aptX_Classic.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/capi_v2_aptX_Classic.so",
@@ -5791,7 +5791,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "capi_v2_aptX_HD",
+    name: "vendor_lib_rfsa_adsp_capi_v2_aptX_HD_so",
     filename: "capi_v2_aptX_HD.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/capi_v2_aptX_HD.so",
@@ -5800,7 +5800,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libSuperSensor_skel",
+    name: "vendor_lib_rfsa_adsp_libSuperSensor_skel_so",
     filename: "libSuperSensor_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libSuperSensor_skel.so",
@@ -5809,7 +5809,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libVC1Dec",
+    name: "vendor_lib_rfsa_adsp_libVC1Dec_so",
     filename: "libVC1Dec.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libVC1Dec.so",
@@ -5818,7 +5818,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libVC1DecDsp_skel",
+    name: "vendor_lib_rfsa_adsp_libVC1DecDsp_skel_so",
     filename: "libVC1DecDsp_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libVC1DecDsp_skel.so",
@@ -5827,7 +5827,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libVDHexagonSuperPhoto_skel",
+    name: "vendor_lib_rfsa_adsp_libVDHexagonSuperPhoto_skel_so",
     filename: "libVDHexagonSuperPhoto_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libVDHexagonSuperPhoto_skel.so",
@@ -5836,7 +5836,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libapps_mem_heap",
+    name: "vendor_lib_rfsa_adsp_libapps_mem_heap_so",
     filename: "libapps_mem_heap.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libapps_mem_heap.so",
@@ -5845,7 +5845,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libarcsoft_dualcam_refocus_skel",
+    name: "vendor_lib_rfsa_adsp_libarcsoft_dualcam_refocus_skel_so",
     filename: "libarcsoft_dualcam_refocus_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libarcsoft_dualcam_refocus_skel.so",
@@ -5854,7 +5854,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libcamera_nn_skel",
+    name: "vendor_lib_rfsa_adsp_libcamera_nn_skel_so",
     filename: "libcamera_nn_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libcamera_nn_skel.so",
@@ -5863,7 +5863,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libcvpdsp_skel",
+    name: "vendor_lib_rfsa_adsp_libcvpdsp_skel_so",
     filename: "libcvpdsp_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libcvpdsp_skel.so",
@@ -5872,7 +5872,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libdspCV_skel",
+    name: "vendor_lib_rfsa_adsp_libdspCV_skel_so",
     filename: "libdspCV_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libdspCV_skel.so",
@@ -5881,7 +5881,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libdsp_streamer_add_constant",
+    name: "vendor_lib_rfsa_adsp_libdsp_streamer_add_constant_so",
     filename: "libdsp_streamer_add_constant.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libdsp_streamer_add_constant.so",
@@ -5890,7 +5890,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libdsp_streamer_binning",
+    name: "vendor_lib_rfsa_adsp_libdsp_streamer_binning_so",
     filename: "libdsp_streamer_binning.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libdsp_streamer_binning.so",
@@ -5899,7 +5899,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libdsp_streamer_skel",
+    name: "vendor_lib_rfsa_adsp_libdsp_streamer_skel_so",
     filename: "libdsp_streamer_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libdsp_streamer_skel.so",
@@ -5908,7 +5908,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libfastcvadsp",
+    name: "vendor_lib_rfsa_adsp_libfastcvadsp_so",
     filename: "libfastcvadsp.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libfastcvadsp.so",
@@ -5917,7 +5917,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libfastcvdsp_skel",
+    name: "vendor_lib_rfsa_adsp_libfastcvdsp_skel_so",
     filename: "libfastcvdsp_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libfastcvdsp_skel.so",
@@ -5926,7 +5926,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libhexagon_nn_skel",
+    name: "vendor_lib_rfsa_adsp_libhexagon_nn_skel_so",
     filename: "libhexagon_nn_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libhexagon_nn_skel.so",
@@ -5935,7 +5935,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libhexagon_nn_skel_secondary",
+    name: "vendor_lib_rfsa_adsp_libhexagon_nn_skel_secondary_so",
     filename: "libhexagon_nn_skel_secondary.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libhexagon_nn_skel_secondary.so",
@@ -5944,7 +5944,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libmialgo_rfs_cdsp_skel",
+    name: "vendor_lib_rfsa_adsp_libmialgo_rfs_cdsp_skel_so",
     filename: "libmialgo_rfs_cdsp_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libmialgo_rfs_cdsp_skel.so",
@@ -5953,7 +5953,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libscveObjectSegmentation_skel",
+    name: "vendor_lib_rfsa_adsp_libscveObjectSegmentation_skel_so",
     filename: "libscveObjectSegmentation_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libscveObjectSegmentation_skel.so",
@@ -5962,7 +5962,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libscveT2T_skel",
+    name: "vendor_lib_rfsa_adsp_libscveT2T_skel_so",
     filename: "libscveT2T_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libscveT2T_skel.so",
@@ -5971,7 +5971,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libsnpe_dsp_v66_domains_v2_skel",
+    name: "vendor_lib_rfsa_adsp_libsnpe_dsp_v66_domains_v2_skel_so",
     filename: "libsnpe_dsp_v66_domains_v2_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libsnpe_dsp_v66_domains_v2_skel.so",
@@ -5980,7 +5980,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libsns_device_mode_skel",
+    name: "vendor_lib_rfsa_adsp_libsns_device_mode_skel_so",
     filename: "libsns_device_mode_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libsns_device_mode_skel.so",
@@ -5989,7 +5989,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "libsns_low_lat_stream_skel",
+    name: "vendor_lib_rfsa_adsp_libsns_low_lat_stream_skel_so",
     filename: "libsns_low_lat_stream_skel.so",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/libsns_low_lat_stream_skel.so",
@@ -5998,7 +5998,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "misound_res",
+    name: "vendor_lib_rfsa_adsp_misound_res_bin",
     filename: "misound_res.bin",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/misound_res.bin",
@@ -6007,7 +6007,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "tas25xx_TI_0",
+    name: "vendor_lib_rfsa_adsp_tas25xx_TI_0_bin",
     filename: "tas25xx_TI_0.bin",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/tas25xx_TI_0.bin",
@@ -6016,7 +6016,7 @@ prebuilt_rfsa {
 }
 
 prebuilt_rfsa {
-    name: "tas25xx_TI_1",
+    name: "vendor_lib_rfsa_adsp_tas25xx_TI_1_bin",
     filename: "tas25xx_TI_1.bin",
     owner: "xiaomi",
     src: "proprietary/vendor/lib/rfsa/adsp/tas25xx_TI_1.bin",

Android.mk

@@ -3,26 +3,3 @@
 #
 
 LOCAL_PATH := $(call my-dir)
-
-ifeq ($(TARGET_DEVICE),surya)
-
-$(call add-radio-file-sha1-checked,radio/abl.elf,dbbc32e89ca68a60436c3e854405a8b1efeb8fcf)
-$(call add-radio-file-sha1-checked,radio/aop.mbn,a882a33ee29f3ab2bc31e7acb79097b887fcef1b)
-$(call add-radio-file-sha1-checked,radio/bluetooth.img,0104675466a0b9929cff55dc8570d02f9e8cfd68)
-$(call add-radio-file-sha1-checked,radio/cmnlib.mbn,5529386716c6202fd22499c1f2501fef393c9876)
-$(call add-radio-file-sha1-checked,radio/cmnlib64.mbn,1cfa661df1bd4c5553a897d5efcc1e5c576473ce)
-$(call add-radio-file-sha1-checked,radio/devcfg.mbn,d7c307c8806ac25d255a955f7735e1ff6c7e3c0e)
-$(call add-radio-file-sha1-checked,radio/dsp.img,fa7ef222aa1ecc6d8c0d6dd7180f4d31b95a240e)
-$(call add-radio-file-sha1-checked,radio/ffu.img,f1e5f71fa958f200a58e4a33047855da3730a34f)
-$(call add-radio-file-sha1-checked,radio/hyp.mbn,d09950017f0c2b742632e77e7299dbfb49ae90de)
-$(call add-radio-file-sha1-checked,radio/imagefv.elf,94f4994f6fafa28b1cd0dbde03d9187598d8fdd6)
-$(call add-radio-file-sha1-checked,radio/keymaster.img,b1973a548a466610fd0a97abcabb0e33b0d3a565)
-$(call add-radio-file-sha1-checked,radio/modem.img,7b3941bc67025180f44eba5b3f4885ad6c5e3549)
-$(call add-radio-file-sha1-checked,radio/qupfw.img,fab96ac4296f7eaecfdf3c104cc5276e4ad0f92c)
-$(call add-radio-file-sha1-checked,radio/storsec.mbn,50c976ea8529037508a3d82c854ed52cee8edbcd)
-$(call add-radio-file-sha1-checked,radio/tz.mbn,430fdf5932313c3950c21f1e1ebe9999aa2e4486)
-$(call add-radio-file-sha1-checked,radio/uefisecapp.img,d52214ccccff09ef84dce8ca2261c31b8ae9114b)
-$(call add-radio-file-sha1-checked,radio/xbl.elf,a9fef573654bab498a953b9d8f8b7e7bdeef0f0a)
-$(call add-radio-file-sha1-checked,radio/xbl_config.elf,db11157c3ffb64b7b3b1752b4d3683e42475a385)
-
-endif

proprietary/system_ext/etc/dpm/dpm.conf

@@ -1,78 +0,0 @@
-#configuration parameters for DPM Fast Dormancy and TCM module.
-
-#Configuration params for FD slot 0
-#delay_time while issuing dormancy_request
-dpm_s0_fd_delay_time_timer_value:0
-#Idle timer value when SCREEN state is ON
-#dpm_fd_screen_on_idle_timer_value = actual_screen_on_timer + delay_time
-dpm_s0_fd_screen_on_idle_timer_value:15
-#Idle timer value when SCREEN state is OFF
-#dpm_fd_screen_off_idle_timer_value = actual_screen_off_timer + delay_time
-dpm_s0_fd_screen_off_idle_timer_value:3
-#Idle timer value when TETHERING is ON
-#This takes precedence over SCREEN state
-#dpm_tethering_on_idle_timer_value = actual_tethering_on_timer + delay_time
-dpm_s0_fd_tethering_on_idle_timer_value:15
-#FastDormancy can be configured for a network type
-#Default configuration 101000011100001000
-dpm_s0_fd_enable_networks_mask:0x28708
-
-#Configuration params for FD slot 1
-#delay_time while issuing dormancy_request
-dpm_s1_fd_delay_time_timer_value:0
-#Idle timer value when SCREEN state is ON
-#dpm_fd_screen_on_idle_timer_value = actual_screen_on_timer + delay_time
-dpm_s1_fd_screen_on_idle_timer_value:15
-#Idle timer value when SCREEN state is OFF
-#dpm_fd_screen_off_idle_timer_value = actual_screen_off_timer + delay_time
-dpm_s1_fd_screen_off_idle_timer_value:3
-#Idle timer value when TETHERING is ON
-#This takes precedence over SCREEN state
-#dpm_tethering_on_idle_timer_value = actual_tethering_on_timer + delay_time
-dpm_s1_fd_tethering_on_idle_timer_value:15
-#FastDormancy can be configured for a network type
-#Default configuration 101000011100001000
-dpm_s1_fd_enable_networks_mask:0x28708
-
-#Configuration params for TCM
-#Idle timer value when SCREEN state is ON
-#min : 1s and max :256s
-dpm_tcm_screen_on_idle_timer_value:5
-#Idle timer value when SCREEN state is OFF
-#min : 0s and max :256s, tcm is disabled with screen off state
-dpm_tcm_screen_off_idle_timer_value:0
-#TCM can be configured for a network type
-#Default configuration 11111111111111111110
-dpm_tcm_enable_networks_mask:0xFFFFE
-
-
-#FastDormancy and TCM can be configured for a network type
-#NETWORK_TYPE_UNKNOWN = 0
-#NETWORK_TYPE_GPRS = 1
-#NETWORK_TYPE_EDGE = 2
-#NETWORK_TYPE_UMTS = 3
-#NETWORK_TYPE_CDMA = 4
-#NETWORK_TYPE_EVDO_0 = 5
-#NETWORK_TYPE_EVDO_A = 6
-#NETWORK_TYPE_1xRTT = 7
-#NETWORK_TYPE_HSDPA = 8
-#NETWORK_TYPE_HSUPA = 9
-#NETWORK_TYPE_HSPA = 10
-#NETWORK_TYPE_IDEN = 11
-#NETWORK_TYPE_EVDO_B = 12
-#NETWORK_TYPE_LTE = 13
-#NETWORK_TYPE_EHRPD = 14
-#NETWORK_TYPE_HSPAP = 15
-#NETWORK_TYPE_GSM = 16
-#NETWORK_TYPE_TD_SCDMA = 17
-#NETWORK_TYPE_IWLAN = 18
-#NETWORK_TYPE_LTE_CA = 19;
-
-#configuration params for Dormancy manager
-#first larger inactivity soft timer to poll for dormancy in seconds.
-dpm_dm_t1_inactivity_timer:15
-#second smaller inactivity soft timer to poll for dormancy in seconds.
-dpm_dm_t2_inactivity_timer:5
-#number of times T2 can be repeated before registering for dormancy indication with modem directly.
-dpm_dm_repeat_t2:5
-

proprietary/system_ext/etc/init/dpmd.rc

@@ -1,23 +0,0 @@
-# Copyright (c) 2018 - 2020 Qualcomm Technologies, Inc.
-# All Rights Reserved.
-# Confidential and Proprietary - Qualcomm Technologies, Inc.
-
-# Create the directories used by DPM subsystem
-
-on post-fs-data
-    mkdir /data/dpm 0771 system system
-    chown system system /data/dpm
-
-#start dpmd service
-service dpmd /system/system_ext/bin/dpmd
-    class late_start
-    socket dpmd stream 660 root radio
-    socket tcm  stream 660 root inet
-    socket dpmwrapper stream 660 root inet
-    group system readproc inet radio wakelock oem_2901
-    disabled
-
-on property:persist.vendor.dpm.feature=*
-    start dpmd
-on property:persist.vendor.dpm.feature=0
-    stop dpmd

proprietary/system_ext/etc/permissions/audiosphere.xml

@@ -1,11 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-    <!--
-        Copyright (c) 2016, 2020 Qualcomm Technologies, Inc.
-        All Rights Reserved.
-        Confidential and Proprietary - Qualcomm Technologies, Inc.
-    -->
-
-<permissions>
-    <library name="com.qualcomm.qti.audiosphere"
-            file="/system_ext/framework/audiosphere.jar" />
-</permissions>

proprietary/system_ext/etc/permissions/com.qti.dpmframework.xml

@@ -1,13 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--Copyright (c) 2015-2016, 2020 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<permissions>
-    <library name="com.qti.dpmframework"
-        file="/system/system_ext/framework/com.qti.dpmframework.jar"/>
-    <library name="android.hidl.manager-V1.0-java"
-        file="/system/framework/android.hidl.manager-V1.0-java.jar"/>
-    <permission name="com.qualcomm.permission.READPROC" >
-    <group gid="readproc" />
-    </permission>
-</permissions>

proprietary/system_ext/etc/permissions/dpmapi.xml

@@ -1,8 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--Copyright (c) 2014, 2019-2021 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<permissions>
-    <library name="dpmapi"
-        file="/system/system_ext/framework/dpmapi.jar"/>
-</permissions>

proprietary/system_ext/etc/permissions/qcrilhook.xml

@@ -1,6 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<permissions>
- <library name="com.qualcomm.qcrilhook"
-          file="/system_ext/framework/qcrilhook.jar"
-          dependency="qti-telephony-utils:qti-telephony-hidl-wrapper" />
-</permissions>

proprietary/system_ext/etc/permissions/qti_permissions.xml

@@ -1,14 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!--
-  Copyright (c) 2016 Qualcomm Technologies, Inc.  All Rights Reserved.
-  Qualcomm Technologies Proprietary and Confidential.
--->
-<permissions>
-    <permission name="com.qti.permission.DIAG">
-        <group gid="oem_2901" />
-    </permission>
-    <permission name="com.qti.permission.AUDIO">
-        <group gid="audio" />
-    </permission>
-</permissions>
-

proprietary/vendor/etc/cne/mwqem.conf

@@ -1,17 +0,0 @@
-#configuration parameters for Multi-network Wireless Quality Estimation and Management.
-
-#Number of previous latency iterations to track to decide the better LQS interface
-latency_count:3
-#Threshold in ms to decide the better interface for LQS.
-latency_threshold:10
-#Number of tcp connections to be established in each latency session
-max_tcp_connects:3
-#Max waiting time for a dns query to be resolved
-dns_timeout:9
-#Minimum change in mwqem ratio to update the new LQA ratio
-lqa_update_threshold:0.25
-#Timer in msec to track the lqs updates. Only one update will be allowed
-#in this duration
-lqa_update_count_timer:10000
-#default URL for establishing a tcp sessions
-mwqem_http_url:www.qualcomm.com

proprietary/vendor/etc/cne/profileMwqem.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2020 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>10</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>100</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>4</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>1</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile1.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1.0</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1.0</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1.0</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1.0</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1.0</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>10</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1.0</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1.0</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>100</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>4</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1.0</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                                        <MACMibThreshold2a>1.0</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1.0</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile2.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1.0</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1.0</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1.0</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1.0</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1.0</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>10</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1.0</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1.0</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>100</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>4</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1.0</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                                        <MACMibThreshold2a>1.0</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1.0</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile3.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>10</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>100</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>4</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>1</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile4.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1.0</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1.0</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1.0</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1.0</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1.0</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>10</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1.0</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1.0</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>100</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>4</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1.0</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                                        <MACMibThreshold2a>1.0</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1.0</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile5.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>12</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>3</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>60</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>1</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile6.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>12</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>3</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>60</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>1</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile1.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>0.09</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>0.1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>0.55</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>0.15</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>0.12</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>10</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>0.1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>0.64</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>100</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>4</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>0.22</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>0.42</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>0.21</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile15.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>10</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>100</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>4</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>1</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile16.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>10</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>100</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>4</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>1</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile17.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>10</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>100</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>4</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>1</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile18.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>10</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>100</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>4</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>1</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile19.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>10</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>100</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>4</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-72</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>1</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile2.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>0.09</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>0.1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>0.55</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>0.15</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>0.12</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>10</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>0.1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>0.64</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>100</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>4</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>0.22</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>0.42</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>0.21</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile20.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>12</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>3</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>60</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>1</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile21.xml

@@ -1,239 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
-    All Rights Reserved.
-    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
-<AndsfPolicy><Andsf>
-	    <Version>5.1</Version>
-		<Name>Test 1</Name>
-		<Ext>
-			<WQE>
-				<InterfaceManager>
-					<BQE_Disabled>true</BQE_Disabled>
-					<ICD_Disabled>true</ICD_Disabled>
-					<!-- Default bqe thresholds where no apIds are specified. -->
-					<BQE_Thresholds Id="128">
-						<RadioTechnology Type="CDMA2000">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_0">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_A">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EVDO_B">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EDGE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="UMTS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSDPA">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="GPRS">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="LTE">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="EHRPD">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-						<RadioTechnology Type="HSPAP">
-							<Threshold units="bps">0</Threshold>
-						</RadioTechnology>
-					</BQE_Thresholds>
-					<Authentication>
-						<MaxAuthTime>60</MaxAuthTime>
-						<IcdBanRetest>3</IcdBanRetest>
-						<AuthApps>
-							<Appname>someauthapp1</Appname>
-							<Appname>someauthapp2</Appname>
-							<Appname>someauthapp3</Appname>
-						</AuthApps>
-					</Authentication>
-					<ICD config-type="disabled">
-					</ICD>
-                    <TQE>
-                        <!-- Default node for TQE_Thresholds element -->
-                        <TQE_Thresholds Id="128">
-                            <!-- Disabling Broken Backhaul Detector module -->
-                            <BBD_Disabled>true</BBD_Disabled>
-                            <!-- Disabling Degraded Backhaul Detector module -->
-                            <DBD_Disabled>true</DBD_Disabled>
-                            <!-- Threshold on downlink gap indicator metric -->
-                            <DGIMThresh units="msecs">400</DGIMThresh>
-                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
-                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
-                            <!-- Time window for TQE history -->
-                            <TQETimeWindow units="secs">77</TQETimeWindow>
-                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
-                            <RatioThresh>0.2</RatioThresh>
-                        </TQE_Thresholds>
-                    </TQE>
-				</InterfaceManager>
-			</WQE>
-			<CQE prodId="Rome">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>4</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>9</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>50</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>4</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-		    <CQE prodId="Helium">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
-					<!-- Threshold for RX MPDU PER -->
-					<RMP_THR>1</RMP_THR>
-					<!-- Minimum MPDU count to activate RX MPDU PER -->
-					<RMP_CNT_THR>12</RMP_CNT_THR>
-					<!-- Cutoff RX MCS index -->
-					<RX_MCS_THR>3</RX_MCS_THR>
-					<!-- Cutoff RX BW index -->
-					<RX_BW_THR>3</RX_BW_THR>
-					<!-- Threshold for TX MSDU drop -->
-					<TMD_THR>1</TMD_THR>
-					<!-- Minimum MSDU count to activate TX MSDU drop -->
-					<TMD_CNT_THR>2</TMD_CNT_THR>
-					<!-- Threshold for MPDU retry rate -->
-					<TMR_THR>1</TMR_THR>
-					<!-- Minimum MPDU count to activate MPDU retry rate -->
-					<TMR_CNT_THR>60</TMR_CNT_THR>
-					<!-- Cutoff TX MCS index -->
-					<TX_MCS_THR>8</TX_MCS_THR>
-					<!-- Cutoff TX BW index -->
-					<TX_BW_THR>2</TX_BW_THR>
-					<!-- Maximum MPDU count to activate RX MPDU PER -->
-					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
-					<!-- Maximum MPDU count to activate MPDU retry rate -->
-					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
-					<!-- Threshold for PERAM -->
-					<PERAM_THR>1</PERAM_THR>
-					<!-- Minimum MPDU count to activate PERAM -->
-					<PERAM_CNT_THR>20</PERAM_CNT_THR>
-					<!-- Maximum MPDU count to activate PERAM -->
-					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
-					<!-- CQE throughput Threshold-->
-					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
-				</CQE_Thresholds>
-			</CQE>
-			<CQE prodId="Pronto">
-				<!-- Default node for CQE_Thresholds element -->
-				<CQE_Thresholds Id="128">
-					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
-					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
-					<!-- a candidate for interface selection -->
-					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
-					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
-					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
-					<!-- Interval over whcih RSSI values are averaged -->
-					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
-					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
-					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
-					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
-					<!-- Setting CQETimer to zero disables the CQE -->
-					<CQETimer units="secs">2</CQETimer>
-					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
-					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
-					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
-					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
-					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
-					<FrameCntThreshold units="frames">8</FrameCntThreshold>
-					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
-					<ColdStartThreshold units="frames">2</ColdStartThreshold>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-                    <MACMibThreshold2a>1</MACMibThreshold2a>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is greater than RSSIModelThreshold -->
-					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
-					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
-					<!-- such as retry, multi-retry, fail and  ack fail metric -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MACMibThreshold2b>1</MACMibThreshold2b>
-					<!-- The weightage that given to retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
-					<!-- The weightage that given to multi-retry metric in computation of CQE -->
-					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
-					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
-				</CQE_Thresholds>
-			</CQE>
-		</Ext>
-	</Andsf></AndsfPolicy>